Products

Metox 30 is peroxide initiator for copolymerization of unsaturated resins polyester. They are mainly used with cobalt accelerators at temperature surroundings. They are suitable for manual and spray lamination. Due to the lowered water content is recommended for hardening gel coats, polymer concrete, some polyester varnishes and others. These initiators show an extended gelation time compared to Metox-50.

Cetox 50S is a peroxide initiator for copolymerization of unsaturated resins polyester. It is mainly used with cobalt accelerators at temperature surroundings. Suitable for manual and spray lamination. In relation to the hardener Cetox-50 shows a shorter gelation time, while compared to the Metox-50 initiator, gives a lower exotherm and a more gradual cure. Can be used also in technologies related to the production of thick laminate layers and for button production.

Cetox-50 is a peroxide initiator for the copolymerization of unsaturated polyester resins. It is mainly used with cobalt accelerators at ambient temperature. Suitable for manual and spray lamination. In relation to the hardener Metox-50 it contains a lower amount of active oxygen, shows a longer copolymerization time and also a lower effect exothermic.

Cetox 30OE is a peroxide initiator for copolymerization of unsaturated resins polyester. It is mainly used with cobalt accelerators at temperature surroundings. Suitable for manual and spray lamination. It is less active than Cetox-50 and more active than Cetox-20OE.

Cetox 12OB RED is a peroxide initiator for copolymerization of unsaturated resins polyester. It is mainly used with cobalt accelerators at temperature surroundings. Suitable for manual and spray lamination. In relation to the hardener Cetox-20OE contains a lower amount of active oxygen, shows a longer copolymerization time, and also less exothermic effect.

Cetox 35OE is a peroxide initiator for the copolymerization of unsaturated resins polyester. It is mainly used with cobalt accelerators at temperature surroundings. Suitable for manual and spray lamination. It is less active than Cetox-50 and more active than Cetox-20OE.

Metox 50W is peroxide copolymerization initiator for unsaturated polyester resins. They are mainly used with cobalt accelerators to curing at ambient temperature. They are suitable for manual and spray lamination. They can be used, for example, for the production of polymer concrete. Compared to the hardener Metox-50 show a slightly extended gelation time. Due to the reduced water content Metox-50W is recommended for curing gel coats, some polyester varnishes and others.

Cetox 20OE is a peroxide initiator for the copolymerization of unsaturated resins polyester. It is mainly used with cobalt accelerators at temperature surroundings. Suitable for manual and spray lamination. In relation to the hardener Cetox-50 contains a lower amount of active oxygen, shows a longer copolymerization time as well less exothermic effect.