Knowde Enhanced TDS
Identification & Functionality
- Cleaning Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- HII Features
- Product Highlights
- Good detergency: Hard Surface cleaners and general cleaners. In formulations that contain alcohol ethoxylates then use BioLoop 68L as a green alternative. Also the SDS classifications will help ensure no hazard classifications.
- Excellent substrate wetting on Nylon 6, Nylon 66 and Polycarbonates: Can be used in textile applications that contain Nylon.
Applications & Uses
- Markets
- Applications
- Home Care Applications
- I&I Cleaning Applications
- Applications
The normal grade of BioLoop surfactants are aimed at standard industrial-based processes in which clarity in an aqueous medium isn’t a necessity. The PG versions which denotes our purified grades are for industries in which clarity in aqueous mediums is essential.
Normal Grades:
- Oils and Lubricants
- Emulsion Polymers
- Agrochemical Additives
- Textiles Auxiliaries
- Hand and Floor Wipes
PG Versions:
- Personal Care
- Cosmetics
- Household Products
Properties
- Physical Form
- Appearance
- Amber liquid (at 25°C)
- Odor
- Characteristic
- Typical Properties
- Specifications
| Value | Units | Test Method / Conditions | |
| Hydrophilic-Lyphophilic Balance Value | 13.2 | — | — |
| Viscosity (at 25°C) | 509.0 | cP | — |
| Specific Gravity (at 20°C) | 1.08 | — | — |
| Pour Point | 18.5 | °C | — |
| Flash Point | min. 150 | °C | Closed Cup |
| Surface Tension (0.1% aqueous) | 36.5 | mN/m | — |
| Bio-based Carbon Content | 99.36 | % | — |
| Value | Units | Test Method / Conditions | |
| Color | max. 5 | Gardner | — |
| Cloud Point (1% aqueous) | 64 - 72 | °C | — |
| pH (5% aqueous) | 6 - 8 | — | — |
| Solid Content | 78 - 82 | % | — |
Technical Details & Test Data
- Foaming Profile
Test method: A 0.1% solution is prepared and aerated for 30 seconds and then stopped. The degree of foaming is assessed initially and then after 1, 3 and 5 minutes.
- Detergency Profile
Test method: A formulated soil is applied to a painted disk and then aged in an oven. The disk is then soaked in a detergent solution for 10 minutes and then rotated for a further 5 minutes. The % soil removal is then measured.
- Substrate Wetting
Test method: A 0.5% solution is prepared and is dropped onto various substrates. The contact angle is then measured using a goniometer. The angle is measured initially and then after 5 seconds. The lower the angle the better the product wets the substrate.
Sample Contact Angle Initial Contact Angle - 5 sec
Water 46 45 BioLoop 68L 17 8
Packaging & Availability
- Regional Availability