Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Composite Materials Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Product Characteristics
- Non-ionic emulsifier built in the polymer
- Narrow particle size distribution
- High shelf life due to hydrolytic resistance and fine particle size
- High mechanical shear stability of diluted emulsion
- Hydrolysis and sedimentation stability in a wide pH range
- Characteristics of Film
- Clear
- Not tacky
- Glass transition temperature Tg=12°C
- Very quickly soluble in styrene
- Compatible with unsaturated polyesters and other thermosets
Applications & Uses
- Compatible Polymers & Resins
- Compatible Reinforcements
- Composites End Use
- Composites Processing Methods
- Processing Information
FILCO® 354N is suggested as film former for glass fiber sizes for:
- Mat roving
- Translucent sheet roving
- Spray up roving
- Filament winding roving – Weaving roving – Pultrusion roving
Properties
- Physical Form
- Appearance
- Milky liquid
- Typical Properties
Value Units Test Method / Conditions Viscosity (at 25°C, #3, 20rpm) 700 - 2000 mPa.s MA143LFE Solid Content 45 - 49 % MA145LFE pH 2.5 - 4 - MA148LFE - Particle Size Distribution
Value Units Test Method / Conditions Average Particle Size 300 - 600 nm MA147LFE
Packaging & Availability
- Regional Availability
Storage & Handling
- Shelf Life
- 15 months
- Storage and Shelf Life Conditions
FILCO® 354N should be stored in closed containers away from direct sun rays, at temperature between +5 and +30°C. In these conditions maximum suggested storage time is 15 months from production, in the original package. After that date product must be rechecked.Prevent from freezing. Always observe suggested storage temperature range.Thoroughly mix before use. Depending on transport and/or storage conditions, formation of surface aggregates may sometimes be observed; this can easily be eliminated by stirring before use