Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Polymer Name
- Composite Materials Functions
- Technologies
Applications & Uses
- Composites Processing Methods
- Processing Information
- FILCO® 656-1 is recommended as unsoluble binder for the production of Continuous Filament Mat (CFM), for application in hot or cold press, vacuum and injection molding, pultrusion.
- 4-10% on weight of the mat is normally used. The tensile strength of the mat obtained depends on the binder content and the curing rate of FILCO® 656-1.
- Curing cycle depends on the oven conditions; the mat shall remain in a hot air circulating oven at 200-220°C for at least 90 seconds.
Properties
- Physical Form
- Appearance
- Off - white powder
- Typical Properties
- Particle Size Distribution
Value | Units | Test Method / Conditions | |
Acid Number | 40.0 | mg KOH/g | MA018LCP |
Value | Units | Test Method / Conditions | |
Particle Size (>500 μm) | 0.0 | % | MA123LFE |
Particle Size (>425 μm) | 2.0 | % | MA123LFE |
Particle Size (>250 μm) | 40.0 | % | MA123LFE |
Particle Size (>150 μm) | 32.0 | % | MA123LFE |
Particle Size (>75 μm) | 20.0 | % | MA123LFE |
Particle Size (>45 μm) | 4.0 | % | MA123LFE |
Particle Size (Passing Through) | 2.0 | % | MA123LFE |
Packaging & Availability
- Packaging Type
- Regional Availability
- Packaging Information
FILCO® 656-1 is supplied in 125 kg fiber drums.
Storage & Handling
- Shelf Life
- 6 months
- Storage and Shelf Life Conditions
FILCO® 656-1 should be stored in closed containers away from direct sun rays and source of heat, at temperature below 25°C. In these conditions, maximum suggested storage time is 6 months from production, in the original package. After that date the product must be rechecked.