Knowde Enhanced TDS
Identification & Functionality
- Carrier
- Chemical Name
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Product Highlights
- Deuteron® UV 2257 is a solution of Bis-(4-methyl- phenyl)-iodoniumhexafluoro-phosphate in reactive solvents. Deuteron® photo initiators are suitable for resins based on oxirane and/or oxetane groups (epoxy resins and vinylether. The addition of Deuteron® photo initiators enables the formulator to utilize UV light to induce the polymerisation of the above-mentioned resin systems.
- Deuteron® UV 2257 is soluble in the mentioned binder systems including the standard solvents and reactive diluents. The polymerization is initiated by exposure to UV light in a wavelength range between 220 nm and 250 nm. The maximum absorption is at 240 nm. Suitable light sources are high-pressure mercury lamps that have a high emission in the mentioned area of absorption.
- Deuteron® UV 2257 does not affect the film shrinkage negatively because it contains no volatile solvents.
Applications & Uses
- Applications
- Cure Method
- Adhesive & Sealant Type
- Coating Type
- Ink & Toner Type
- Use Level
- 1.0 - 5.0 %
- Application and Dosage Information
Deuteron® UV 2257 is suitable for a wide range of applications including:
- Overprint varnishes
- UV silk-screen inks
- UV flexographic inks
- UV lamination adhesives
- Metal coatings
- Plastics coatings
The use of Deuteron® UV 2257 especially improves the following properties:
- low shrinkage
- no benzene emission
- only slight odor
- flexibility
- adhesion properties on difficult substrates
Dosage
- Typical addition range: 1.0 % - 5.0 %
- The required dosage level highly depends on the system and the desired curing speed.
- Thus, it is highly recommended to determine the needed addition level by a practical ladder study.
Processing
- Deuteron® UV cationic initiators can be incorporated into the binder with high-speed stirrer or other aggregates, e.g. dissolver.
Properties
- Physical Form
- Appearance
- Yellow, slightly viscous liquid
- Typical Properties
Value | Units | Test Method / Conditions | |
Density | approx. 1.4 | g/cm³ | — |
Active Content | 50.0 | % | — |
Packaging & Availability
- Packaging Type
- Regional Availability
- Packaging Information
- Plastic canister (25 kg net)
Storage & Handling
- Shelf Life
- 12 months
- Storage and Shelf Life Conditions
- 12 months at room temperature and dry conditions in its original tightly closed containers.
- Do not expose to direct sunlight. Optimum storage temperature is be- tween 10 °C and 35 °C. Avoid contact with water and high humidity.