Knowde Enhanced TDS
Identification & Functionality
- Carrier
- CASE Ingredients Functions
- Technologies
Features & Benefits
- CASE Ingredients Features
- Product Highlights
- TRAPYLEN® 186 X has a higher chlorine content than other grades which results in a comparatively good compatibility with other resins and polymers and excellent pigment wetting. The cured film has a high gloss and a remarkable chemical and aging resistance.
- Its main merit is the outstanding adhesion on untreated polypropylene, PP/EPDM thermoplastic rubber and - with limitations - on polyethylene.
- Its resistance against fatty oil and grease is limited and must be compensated in combining it with other lower chlorinated TRAPYLEN® grades.
- It is only recommended as a binder resin for screen printing inks and as an adhesion promoter in plastic paints and solvent based contact adhesives on NR/SBR/polychloroprene basis.
Applications & Uses
- Markets
- Compatible Polymers & Resins
- Compatible Substrates & Surfaces
- Adhesive & Sealant Type
- Ink & Toner Type
- Applications
Dosage to main system has to be approved by testing. Application quantity for screen printing inks in range of 3 - 4 g/m² drying conditions are 30 s at 80°C.
Properties
- Color
- Physical Form
- Appearance
- Clear viscous yellowish liquid
- Typical Properties
- Compatibility
Due to higher chlorine content relatively good compatibility to other resins like acrylates, alkyd and hydrocarbon resins, gum resin esters and EVA-copolymers.
Value | Units | Test Method / Conditions | |
Solid Content | 58 - 62 | % | — |
Viscosity | 400 - 1200 | mPa.s | — |
Chlorine Content | 41 - 45 | % | — |
Softening Point | approx. 70 | °C | — |
Drying Conditions (at 80°C) | 30.0 | seconds | — |
Residual Quantity of Resin | 3 - 4 | g/m² | — |
Packaging & Availability
- Packaging Type
- Regional Availability
- Packaging Information
Iron drums of 180 kg net, other packing on request
Storage & Handling
- Storage and Shelf Life Conditions
- At least 12 months in closed packing at 15°C.
- Gel formation is possible at lower temperatures.
- Before use it is strictly recommended to keep the drums at 40°C for a while until the solution returns to liquid phase.
- Gel formation is reversal and has no influence on the product's quality.