company tower banner
Pace International Company Logo

PacRite® FDL 230SC

1 of 7 products in this brand
PacRite® FDL 230SC is Broad-spectrum fludioxonil fungicide for decay control on various fruit varieties.

Functions: Fungicide

Safety Data Sheet
  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

Agrochemical Functions
CAS No.
131341-86-1
Technologies
Active Ingredient
Fludioxonil 20.4%
Other Ingredients 79.6%
Total 100.0%

 

Features & Benefits

Labeling Claims

Applications & Uses

Applicable Crop
Direction For Use

It is a violation Of Federal law to use this product in a manner inconsistent with its labeling. For any requirements specific to your State or Tribe, consult the State or Tribal agency responsible for pesticide regulation. Do not formulate this product into other End-use products
Product Information Failure to follow the Directions for Use and Precautions on this label may result in poor disease control.
Fungicide Resistance Management
Group 12 Fungicide
PacRite FDI- contains fiudioxonil, a fungicide in the phenylpyrrole class of chemistry with a unique mode Of actlon, which leads to increased glycerol synthesis. Fungal isolates with acquired resistance to Group 12 may eventually dominate the fungal population if Group 12 fungicides are used repeatedly in the same packing house or in successive years as the primary method of control for targeted pathogens. This may result in partial or total loss of control of those pathogens by fludioxonil or other Group 12 fungicides. Because resistance development cannot be predicted, use of postharvest resistance management strategies should be practiced. These may include rotating and/or tank mixing with products having different modes Of action. Sanitation and other cultural practices to minimize disease are also recommended to aid in control as well as to assist in preventing/delayng resistance development.
NOTE: PacRite FDL may be degraded by exposure to direct sunlight. Treated fruit should not be stored in direct sunlight.
Mixing Procedures
Vigorously shake the product container before mixing. Prepare no more spray mixture than is needed for the immediate operation. Thoroughly clean Spray equipment before using this product. Vigorous agitation is necessary for proper dispersal of the product. Maintain maximum agitation throughout the spraying operation. Do not let the spray mixture stand ovemight in the spray tank. Flush the spray equipment thoroughly following each use. Add % of the required amount Of water, wax/oil emulsion, or aqueous dilution of a wax/oil emulsion to the spray or mixing tank. With the agitator running, open the Container and add PacRite FDL to the tank. Continue agitation while adding the remainder of the carrier. Begin application of the solution after PacRite FDL has completely and uniformly dispersed into the mix carrier. Maintain agitatiån until the entire mixture has been used.
If tank-mixing, add the desired amount of other products recommended for tank mixture after PacRite FDI- has completely and uniformly dispersed into the mix carrier. In general, tank mix partners should be added in this order: wettable powders, wettable granules (dry fiowables), liquid flowables, liquids, and emulsifiable concentrates. Always allow each tank mix partner to become fully dispersed before adding the next product. Continue agitation to maintain a uniform Suspension until all Of the spray solution has been applied. Maintain
agitation until the entire mixture has been used.

THE CROP SAFETY OF ALL POTENTIAL TANK MIXES INCLUDING ADDITIVES AND OTHER PESTICIDES HAS NOT BEEN TESTED ON ALL CROPS. BEFORE APPLYING ANY TANK
MIXTURE, SAFETY TO THE TARGET CROP SHOULD BE CONFIRMED.
To determine the physical compatibility Of PacRite FDL with Other products, use a jar compatibility test as follows: Using a quart jar, add the proportionate of the products to 1 qt. of water or wax/oil emulsion. Add wettable powders and water dispersible granular products first, then liquid flowables, and emulsifiable concentrates last. After thoroughly mixing, let stand for at least 5 minutes. If the combination remains mixed or can be remixed readily, it is physically compatible. Once compatibility has been proven, use the same procedure for adding required ingredients to the spray tank. If using PacRite FDL in a tank mixture, follow all directions for use, crops/sites, use rates, dilution ratios, precautions, and limitations which appear on the labels of the products being mixed. Do not exceed the label dosage rate and the most restrictive label precautions and limitations must be followed. This product must not be mixed with any product which prohibits such mixing. Tank mixtures are permitted only in those states where the tank mix partner is registered.

 

 

 

Crop Use Directions

Citrus: Catamondin (Citrus mitis, Citrofortunella mitis), Citrus citron (Citrus medica), Citrus hybrids (Citrus spp.) (includes chironja, tangelo, tangor), Grapefruit (Citrus paradisl), Kumquat (Fortunella spp.), lemon (Citrus jambhiri, Citrus limon), lime (Citrus aurantiifo/ia), Mandarin (tangerine) (Citrus reticulata), Orange, sour (Citrus aurantium), Orange, sweet (Citrus sinensis), Pumme;o (Citrus grandis, Citrus maxima), Satsuma mandarin (Citrus unshiu)
use PacRite FDL as a postharvest dip, drench, flood, or spray for the control of postharvest diseases caused by Green or Blue mold (Penici/lium spp.), Diplodia stem-end rot (Lasiodiploidia theobromae), Phomopsis stem-end rot (Diaporthe citro and Gray mold (Botrytis cinerea).

Regulatory & Compliance

Certifications & Compliance

Safety & Health

First Aid
If in eyes
  • Hold eye open and rinse slowly and gentlywith water for 15-20 minutes.
  • Remove contact lenses, if present, afterthe first 5 minutes, then continue rinsing eye.
  • Call a poison control center or doctor for treatment advice.
If on skin
  • Take off contaminated clothing.
  • Rinse skin immediately with plenty of water for 15-20 minutes.
  • Call a poison control center or doctor for treatment advice.

Have the product container or label with you when calling a poison control center or doctor or going for treatment

 

Precautionary Statements

Hazards to Humans and Domestic Animals CAUTION.
Causes moderate eye irritation. Harmful if absorbed through skin. Avoid contact with eyes, skin, or clothing. Remove and wash contaminated clothing before reuse. Wash thoroughly with soap and water after handling and before eating, drinking, chewing gum, using tobacco or using the toilet.
ENVIRONMENTAL HAZARDS
This product is toxic to fish and aquatic invertebrates. Do not contaminate water when disposing of equipment wash waters or rinsates.
PHYSICAL OR CHEMICAL HAZARDS
Do not üse or store near heat or open flame.
Do not use with or store near oxidizing agents.

 

Storage & Handling

Storage And Disposal

DO not contaminate water, food or feed by storage and disposal.
PESTICIDE STORAGE: Do not store near heat or open flame. Store only in original container. Keep container closed when not in use. Do not store near food or feed. In case of spill on floor or paved surfaces, mop and remove to chemical waste storage area until proper disposal can be made if product cannot be used according to the label. Take special care to avoid contamination of equipment and facilities during cleanup procedures and disposal of wastes.
PESTICIDE DISPOSAL: Improper disposal Of unused pesticide, spray mixture, or rinsate is a violation of federal law. If these wastes cannot be disposed of by use according to label instructions, contact your State Pesticide or Environmental Control Agency, Or the Hazardous Waste representative of the nearest EPA Regional Office for guidance.
CONTAINER HANDLING: Non-refillable container. DO not reuse or refill this container. Offer for recycling if available. Triple rinse container (or equivalent) promptly after emptying. Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank and drain for 10 seconds after the flow begins to drip. Fill the container % full with water and recap. Shake for 10 seconds. Pour rinsate into application equipment Or a mix tank or store rinsate for later use or disposal. Drain for 10 seconds after
the flow begins to drip. Repeat this procedure more times. Then offer for recycling if available or puncture and dispose Of in a sanitary landfill, or by incineration, or, if allowed by state and local authorities, by buming. If burned, stav out of smoke.