Knowde Enhanced TDS
Identification & Functionality
- Agrochemical Functions
- CAS No.
- 131341-86-1
- Technologies
- Product Families
- Active Ingredient
Fludioxon 20.4% Other Ingredients 79.6% Total 100.00%
Applications & Uses
- Markets
- Applications
- Application Technique
- Fungicide Target Species
- Crop Use Directions
Pome fruit: Apple (Malus domestica), Crabapple (Malus spp.), Loquat (Eriobotrya japonica), Mayhaw (Crataegus aestivalis, C. opaca, and C. rufula), Pear (Pyrus communis), Pear, oriental (Pyrus pyrifolia), Quince (Cydonia oblonga)
Use SHIELD-BRITE FDL-230SC as a postharvest dip, drench, flood, or spray for the control of postharvest diseases caused by Blue mold (Penicillium expansum), Gray mold (Botrytis cinerea), Bull’s-eye rot (Neofabraea malacorticis), Rhizopus rot (Rhizopus stolonifer), Bitter rot (Colletotrichum gloeosporiodes), Sphaeropsis rot (Sphaeropsis pyriputrescens), Phacidiopycnis rot (Phacidiopycnis piri), Speck rot (Phacidiopycnis washingtonensis), White rot (Botryosphaeria dothidea), Alternaria rot (side rot) and surface mold (Alternaria alternata)
tone Fruit: Apricot (Prunus armeniaca), Nectarine (Prunus persica), Peach (Prunus persica), Plum (Prunus domestica, Prunus spp.), Plum, Chickasaw (Prunus angustifolia), Plum, Damson (Prunus domestica spp. insititia), Plum, Japanese (Prunus salicina), Plumcot (Prunus armeniaca x P. domestica), Prune (fresh), (Prunus domestica, Prunus spp.), as well as other cultivars and hybrids of these.Use SHIELD-BRITE FDL-230SC as a post-harvest dip or spray for the control of post-harvest diseases caused by Brown rot (Monilinia spp.), Gray mold (Botrytis cinerea), Rhizopus rot (Rhizopus stolonifer), and Gilbertella rot (Gilbertella persicaria).- Direction For Use
t is a violation of Federal law to use this product in a manner inconsistent with its labeling. For any requirements specific to your State or Tribe, consult the State or Tribal agency responsible for pesticide regulation.Do not formulate this product into other End-use products.Product InformationFailure to follow the Directions for Use and Precautions on this label may result in poor disease control.Fungicide Resistance ManagementGroup 12 FungicideSHIELD-BRITE FDL-230SC contains fludioxonil, a fungicide in the phenylpyrrole class of chemistry with a unique mode of action, which leads to increased glycerol synthesis. Fungal isolates with acquired resistance to Group 12 may eventually dominate the fungal population if Group 12 fungicides are used repeatedly in the same packing house or in successive years as the primary method of control for targeted pathogens. This may result in partial or total loss of control of those pathogens by fludioxonil or other Group 12 fungicides. Because resistance development cannot be predicted, use of post-harvest resistance management strategies should be practiced. These may include rotating and/or tank mixing with products having different modes of action. Sanitation and other cultural practices to minimize disease are also recommended to aid in control as well as to assist in preventing/delaying resistance development.NOTE: SHIELD-BRITE FDL-230SC may be degraded by exposure to direct sunlight. Treated fruit should not be stored in direct sunlight.Mixing ProceduresVigorously shake the product container before mixing. Prepare no more spray mixture than is needed for the immediate operation. Thoroughly clean spray equipment before using this product. Vigorous agitation is necessary for proper dispersal of the product. Maintain maximum agitation throughout the spraying operation. Do not let the spray mixture stand overnight in the spray tank. Flush the spray equipment thoroughly following each use.
Add ½ of the required amount of water, wax/oil emulsion, or aqueous dilution of a wax/oil emulsion to the spray or mixing tank. With the agitator running, open the container and add SHIELD-BRITE FDL-230SC to the tank. Continue agitation while adding the remainder of the carrier. Begin application of the solution after SHIELD-BRITE FDL-230SC has completely and uniformly dispersed into the mix carrier. Maintain agitation until the entire mixture has been used.If tank-mixing, add the desired amount of other products recommended for tank mixture after SHIELD-BRITE FDL-230SC has completely and uniformly dispersed into the mix carrier. In general, tank mix partners should be added in this order: wettable powders, wettable granules (dry flowables), liquid flowables, liquids, and emulsifiable concentrates. Always allow each tank mix partner to become fully dispersed before adding the next product. Continue agitation to maintain a uniform suspension until all of the spray solution has been applied. Maintain agitation until the entire mixture has been used.THE CROP SAFETY OF ALL POTENTIAL TANK MIXES INCLUDING ADDITIVES AND OTHER PESTICIDES HAS NOT BEEN TESTED ON ALL CROPS. BEFORE APPLYING ANY TANK MIXTURE, SAFETY TO THE TARGET CROP SHOULD BE CONFIRMED.To determine the physical compatibility of SHIELD-BRITE FDL-230SC with other products, use a jar compatibility test as follows: Using a quart jar, add the proportionate amounts of the products to 1 qt. of water or wax/oil emulsion. Add wettable powders and water dispersible granular products first, then liquid flowables, and emulsifiable concentrates last. After thoroughly mixing, let stand for at least 5 minutes. If the combination remains mixed or can be remixed readily, it is physically compatible. Once compatibility has been proven, use the same procedure for adding required ingredients to the spray tank.If using SHIELD-BRITE FDL-230SC in a tank mixture, follow all directions for use, crops/sites, use rates, dilution ratios, precautions, and limitations which appear on the labels of the products being mixed. Do not exceed the label dosage rate and the most restrictive label precautions and limitations must be followed. This product must not be mixed with any product which prohibits such mixing. Tank mixtures are permitted only in those states where the tank mix partner is registered.
Safety & Health
- First Aid
If in eyes - Hold eye open and rinse slowly and gently with water for 15 – 20 minutes.
- Remove contact lenses, if present, after the first 5 minutes, then continue rinsing eye.
- Call a poison control center or doctor for treatment advice
f on skin or clothing - Take off contaminated clothing.
- Rinse skin immediately with plenty of water for 15 - 20 minutes.
- Call a poison control center or doctor for treatment advice
- Precautionary Statements
Hazards to Humans and Domestic Animals
CAUTION. Causes moderate eye irritation. Harmful if absorbed through skin. Avoid contact with eyes, skin, or clothing. Remove and wash contaminated clothing before reuse. Wash thoroughly with soap and water after handling and before eating, drinking, chewing gum, using tobacco or using the toilet.
ENVIRONMENTAL HAZARDS
This product is toxic to fish and aquatic invertebrates. Do not contaminate water when disposing of equipment wash waters or rinsates.
PHYSICAL OR CHEMICAL HAZARDS
Do not use or store near heat or open flame.Do not use with or store near oxidizing agents.
Storage & Handling
- Storage And Disposal
Do not contaminate water, food, or feed by storage or disposal. Open dumping is prohibited.
PESTICIDE STORAGE -
Store in a cool, dry place away from food, drink, and animal feeding stuffs. Do not store below 32°F (0°C). Repeated product freezing and thawing should be avoided. Shake or stir product before use.
PESTICIDE DISPOSAL -
Wastes resulting from the use of this product may be disposed of on site or at an approved waste disposal facility in accordance with Federal, State or local procedures under the Resouce Conservation and Recovery Act.
CONTAINER DISPOSAL -
Non-refillable container. Do not reuse or refill this container. Offer for recycling, if available. Triple rinse container (or equivalent) promptly after emptying. Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank and drain for 10 seconds after the flow begins to drip. Fill the container 1/4 full with water and recap. Shake for 10 seconds. Pour rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Drain for 10 seconds after the flow begins to drip. Repeat this
procedure two more times. Then offer for recycling if available or reconditioning if appropriate, or puncture and dispose of in a sanitary landfill, or by incineration.
CONTAINER IS NOT SAFE FOR FOOD, FEED OR DRINKING WATER.- Storage And Disposal
Do not contaminate water, food or feed by storage and disposal.PESTICIDE STORAGE: Do not store near heat or open flame. Store only in original container. Keepcontainer closed when not in use. Do not store near food or feed. In case of spill on floor or paved surfaces, mop and remove to chemical waste storage area until proper disposal can be made if product cannot be used according to the label. Take special care to avoid contamination of equipment and facilities during cleanup procedures and disposal of wastes.PESTICIDE DISPOSAL: Improper disposal of unused pesticide, spray mixture, or rinsate is a violation of federal law. If these wastes cannot be disposed of by use according to label instructions, contact your State Pesticide or Environmental Control Agency, or the Hazardous Waste representative of the nearest EPA Regional Office for guidance. CONTAINER HANDLING: Non-refillable container. Do not reuse or refill this container. Offer for recycling if available. Triple rinse container (or equivalent) promptly after emptying. Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank and drain for 10 seconds after the flow begins to drip. Fill the container ¼ full with water and recap. Shake for 10 seconds. Pour rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Drain for 10 seconds after the flow begins to drip. Repeat this procedure two more times. Then offer for recycling if available or puncture and dispose of in a sanitary landfill, or by incineration, or, if allowed by state and local authorities, by burning. If burned, stay out of smoke.
CONTAINER IS NOT SAFE FOR FOOD, FEED OR DRINKING WATER.