Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Applications
Because of TurboFuse 110 Series low viscosity, it works especially well in close fitting applications such as metal to metal bonding, and rubber to rubber such as "O" ring repair/manufacture.
Properties
- Color
- Appearance
- Clear liquid, Clear hard (Cured)
- Soluble in
- Acetone, MEK, Amide, Methylene Chloride
- Physical Properties
- Typical Properties
- Cured Properties
| Value | Units | Test Method / Conditions | |
| Base Compound (Resin) | Ethyl cyanoacrylate | - | - |
| Viscosity | 2 to 5 | cPs | - |
| Specific Gravity | 1.05 | - | - |
| Flash Point | 170 - 200 | °F | Tagliabue closed cup |
| Value | Units | Test Method / Conditions | |
| Average Set Time (Full Cure 24 hours, Metal) | 5 - 10 | seconds | - |
| Average Set Time (Full Cure 24 Hours, Plastic) | 5 - 10 | seconds | - |
| Average Set Time (Full Cure 24 Hours, Rubber) | 2 - 5 | seconds | - |
| Average Strength (Steel) | 20.0 | N/mm² | - |
| Loctite® Equivalent | 4014.0 | - | - |
| Value | Units | Test Method / Conditions | |
| Softening Temperature | 300 | °F | - |
| Service Temperature | -65 to 180 | °F | - |
| Hardness Barcol | 65 | - | - |
| Dielectric Constant (at 1 MHz) | 3.33 | - | - |
| Specific Resistance | 8.6x10² | Ω-cm | - |
| Gap Filling | 0.002 | inches | - |
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Material Set Up Time
Aluminum to Aluminum 3 to 5 seconds Steel to Steel 5 to 15 seconds Phenolic to Phenolic 3 to 5 seconds Polycarbonate to Polycarbonate 3 to 10 seconds Rubber to Rubber < 3 seconds
Storage & Handling
- Shelf Life
- 1 Year