Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Applications
Because of the 20 viscosity, it works especially well in close to medium fitting applications that have difficult bonding surfaces.
Properties
- Color
- Appearance
- Clear liquid, Clear hard (Cured)
- Soluble in
- Acetone, MEK, Amide, Methylene Chloride
- Physical Properties
- Typical Properties
- Cured Properties
Value | Units | Test Method / Conditions | |
Base Compound (Resin) | Surface insensitive ethyl cyanoacrylate | — | — |
Viscosity | 20 | cPs | — |
Flash Point | 160 - 200 | °F | Tagliabue closed cup |
Value | Units | Test Method / Conditions | |
Shear Strength (Grit Based Steel) | min. 20 | N/mn² | ASTM D 1002/DIN 53283 |
Shear Strength (Etched Aluminum) | min. 18 | N/mn² | ASTM D 1002/DIN 53283 |
Shear Strength (Rubbers) | min. 22 | N/mn² | ASTM D 1002/DIN 53283 |
Shear Strength (Wood) | min. 25 | N/mn² | ASTM D 1002/DIN 53283 |
Shear Strength (Polycarbonate) | min. 12 | N/mn² | ASTM D 1002/DIN 53283 |
Shear Strength (ABS) | min. 10 | N/mn² | ASTM D 1002/DIN 53283 |
Average Set Time (Full Cure 24 hours, Metal) | 5 - 10 | seconds | — |
Average Set Time (Full Cure 24 Hours, Plastic) | 5 - 10 | seconds | — |
Average Set Time (Full Cure 24 Hours, Rubber) | 2 - 5 | seconds | — |
Average Strength (Steel) | 22.0 | N/mm² | — |
Loctite® Equivalent | 406.0 | — | — |
Value | Units | Test Method / Conditions | |
Full Cure Time | 24 | hrs | — |
Melting Temperature | 160 - 170 | °C | — |
Service Temperature | -65 to 80 | °C | — |
Tensile Shear Strength | 18 - 28 | N/mm² | — |
Gap Filling | 0.05 | mm | — |
Regulatory & Compliance
- Quality Standards
Technical Details & Test Data
- Material Set Up Time
Rubber < 3 seconds Plastics 2 to 5 seconds Metals 8 to 10 seconds Wood 1 to 5 seconds Leather 5 to 15 seconds Ceramics 12 to 18 seconds
Storage & Handling
- Shelf Life
- 1 Year