Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Applications
- Compatible Substrates & Surfaces
- Applications
Because of TurboFuse 120 Series low viscosity, it works especially well in close fitting applications such as metal to metal bonding, and rubber to rubber such as "O" ring repair/manufacture. The Low Odor/Low Bloom formula works especially well in Production Plants with limited ventilation.
Properties
- Color
- Appearance
- Clear liquid, Clear hard (Cured)
- Soluble in
- Acetone, MEK, Amide, Methylene Chloride
- Physical Properties
- Typical Properties
- Cured Properties
Value | Units | Test Method / Conditions | |
Base Compound (Resin) | Methoxyethyl cyanoacrylate | — | — |
Viscosity | 35 - 45 | cPs | — |
Specific Gravity | 1.07 | — | — |
Flash Point | 170 - 200 | °F | Tagliabue closed cup |
Value | Units | Test Method / Conditions | |
Average Set Time (Full Cure 24 hours, Metal) | 5 - 10 | seconds | — |
Average Set Time (Full Cure 24 Hours, Plastic) | 5 - 10 | seconds | — |
Average Set Time (Full Cure 24 Hours, Rubber) | 3 - 6 | seconds | — |
Average Strength (Steel) | 20.0 | N/mm² | — |
Loctite® Equivalent | 460.0 | — | — |
Permabond® Equivalent | 941.0 | — | — |
Value | Units | Test Method / Conditions | |
Softening Temperature | 330 | °F | — |
Service Temperature | -65 to 250 | °F | — |
Hardness Barcol | 65 | — | — |
Dielectric Constant (at 1 MHz) | 3.33 | — | — |
Specific Resistance | 8.6x10² | Ω-cm | — |
Gap Filling | 0.004 | inches | — |
Technical Details & Test Data
- Material Set Up Time
Aluminum to Aluminum 3 to 7 seconds Steel to Steel 30 to 75 seconds Phenolic to Phenolic 5 to 10 seconds Polycarbonate to Polycarbonate 3 to 10 seconds Rubber to Rubber 3 to 5 seconds
Storage & Handling
- Shelf Life
- 6 Months