Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Applications
- Compatible Substrates & Surfaces
- Applications
Because of TurboFuse 120SI low viscosity, it works especially well in close fitting applications such as metal to metal bonding, and rubber to rubber such as "O" ring repair/manufacture.
Properties
- Color
- Appearance
- Clear liquid, Clear hard (Cured)
- Soluble in
- Acetone, MEK, Amide, Methylene Chloride
- Physical Properties
- Typical Properties
- Cured Properties
Value | Units | Test Method / Conditions | |
Base Compound (Resin) | Surface insensitive ethyl cyanoacrylate | - | - |
Viscosity | 35 - 45 | cPs | - |
Specific Gravity | 1.05 | - | - |
Flash Point | 170 - 200 | °F | Tagliabue closed cup |
Value | Units | Test Method / Conditions | |
Average Set Time (Full Cure 24 hours, Metal) | 8 - 10 | seconds | - |
Average Set Time (Full Cure 24 Hours, Plastic) | 5 - 10 | seconds | - |
Average Set Time (Full Cure 24 Hours, Rubber) | 2 - 5 | seconds | - |
Average Strength (Steel) | 22.0 | N/mm² | - |
Permabond® Equivalent | 791.0 | - | - |
Value | Units | Test Method / Conditions | |
Softening Temperature | 300 | °F | - |
Service Temperature | -65 to 180 | °F | - |
Hardness Barcol | 65 | - | - |
Dielectric Constant (at 1 MHz) | 3.33 | - | - |
Specific Resistance | 8.6x10² | Ω-cm | - |
Gap Filling | 0.004 | inches | - |
Regulatory & Compliance
- Quality Standards
Technical Details & Test Data
- Material Set Up Time
Aluminum to Aluminum 5 to 10 seconds Steel to Steel 10 to 25 seconds Phenolic to Phenolic 5 to 10 seconds Polycarbonate to Polycarbonate 5 to 15 seconds Rubber to Rubber 3 to 5 seconds
Storage & Handling
- Shelf Life
- 1 Year