Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Compatible Substrates & Surfaces
- Applications
Because of the 100 viscosity, it works especially well in close to medium fitting applications that have difficult bonding surfaces.
Properties
- Color
- Appearance
- Clear liquid, Clear hard (Cured)
- Soluble in
- Acetone, MEK, Amide, Methylene Chloride
- Physical Properties
- Typical Properties
- Cured Properties
Value | Units | Test Method / Conditions | |
Base Compound (Resin) | Surface insensitive ethyl cyanoacrylate | - | - |
Viscosity | 90 - 110 | cPs | - |
Specific Gravity | 1.05 | - | - |
Flash Point | 170 - 200 | °F | Tagliabue closed cup |
Value | Units | Test Method / Conditions | |
Average Set Time (Full Cure 24 hours, Metal) | 8 - 10 | seconds | - |
Average Set Time (Full Cure 24 Hours, Plastic) | 5 - 10 | seconds | - |
Average Set Time (Full Cure 24 Hours, Rubber) | 3 - 6 | seconds | - |
Average Strength (Steel) | 22.0 | N/mm² | - |
Loctite® Equivalent | 401.0 | - | - |
Permabond® Equivalent | 792.0 | - | - |
Value | Units | Test Method / Conditions | |
Melting Temperature | 160 - 170 | °C | - |
Service Temperature | -60 to 80 | °C | - |
Dielectric Strength | 625 | - | - |
Tensile Shear Strength | 18 - 28 | N/mm² | - |
Gap Filling | 0.2 | mm | - |
Regulatory & Compliance
- Quality Standards
Technical Details & Test Data
- Material Set Up Time
Rubber < 3 seconds Plastics 2 to 5 seconds Metals 8 to 10 seconds Wood 1 to 5 seconds Leather 5 to 15 seconds
Storage & Handling
- Shelf Life
- 1 Year