Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Applications
- Compatible Substrates & Surfaces
- Applications
Because of the 500 viscosity, it works especially well in medium fitting applications such as broken ceramic repair, unfinished metal to metal bonding, metal to rubber, and rubber to rubber, such as "O" ring repair/manufacture. This product is a very good, easy to handle general purpose adhesive.
Properties
- Color
- Appearance
- Clear liquid, Clear hard (Cured)
- Soluble in
- Acetone, MEK, Amide, Methylene Chloride
- Physical Properties
- Typical Properties
- Cured Properties
Value | Units | Test Method / Conditions | |
Base Compound (Resin) | Surface insensitive ethyl cyanoacrylate | - | - |
Viscosity | 450 - 550 | cPs | - |
Specific Gravity | 1.05 | - | - |
Flash Point | 170 - 200 | °F | Tagliabue closed cup |
Value | Units | Test Method / Conditions | |
Average Set Time (Full Cure 24 Hours, Rubber) | 5 - 10 | seconds | - |
Average Set Time (Full Cure 24 hours, Metal) | 15 - 20 | seconds | - |
Average Set Time (Full Cure 24 Hours, Plastic) | 10 - 20 | seconds | - |
Average Strength (Steel) | 22.0 | N/mm² | - |
Loctite® Equivalent | 447.0 | - | - |
Permabond® Equivalent | 795.0 | - | - |
Value | Units | Test Method / Conditions | |
Softening Temperature | 300 | °F | - |
Service Temperature | -65 to 180 | °F | - |
Hardness Barcol | 65 | - | - |
Dielectric Constant (at 1 MHz) | 3.33 | - | - |
Specific Resistance | 8.6x10² | Ω-cm | - |
Tensile Shear Strength | 2500 | psi | - |
Gap Filling | 0.007 | inches | - |
Regulatory & Compliance
- Quality Standards
Technical Details & Test Data
- Material Set Up Time
Aluminum to Aluminum 7 to 15 seconds Steel to Steel 15 to 30 seconds Phenolic to Phenolic 10 to 20 seconds Polycarbonate to Polycarbonate 10 to 20 seconds Rubber to Rubber < 10 seconds
Storage & Handling
- Shelf Life
- 1 Year