Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Compatible Substrates & Surfaces
Properties
- Color
- Appearance
- Clear liquid, Clear hard (Cured)
- Soluble in
- Acetone, MEK, Amide, Methylene Chloride
- Physical Properties
- Typical Properties
- Cured Properties
Value | Units | Test Method / Conditions | |
Base Compound (Resin) | Ethyl cyanoacrylate | - | - |
Viscosity | 650 - 750 | cPs | - |
Specific Gravity | 1.06 | - | - |
Flash Point | min. 185 | °F | Tagliabue closed cup |
Value | Units | Test Method / Conditions | |
Average Set Time (Full Cure 24 Hours, Plastic) | 5 - 10 | seconds | - |
Average Set Time (Full Cure 24 Hours, Rubber) | 5 - 10 | seconds | - |
Average Set Time (Full Cure 24 hours, Metal) | 10 - 30 | seconds | - |
Average Strength (Steel) | 22.0 | N/mm² | - |
Loctite® Equivalent | 4204.0 | - | - |
Value | Units | Test Method / Conditions | |
Operating Temperature Range | -58 to 221 | °F | - |
Hot Strength (at 70°F) | 100 | % | - |
Hot Strength (at 221°F) | 45 | % | - |
Hot Strength (at 248°F) | 25 | % | - |
Hot Strength (at 257°F) | Intermittent | % | - |
Tensile Strength | 21 | N/mm² | - |
Gap Filling | 0.007 | inches | - |
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Material Set Up Time
Aluminum to Aluminum 15 to 25 seconds Steel to Steel 45 to 100 seconds Phenolic to Phenolic < 90 seconds Polycarbonate to Polycarbonate 40 to 60 seconds Rubber to Rubber 10 to 25 seconds
Storage & Handling
- Shelf Life
- 1 Year