Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Applications
- Compatible Substrates & Surfaces
- Applications
Because of the 1000 viscosity, it works especially well in bonding porous surfaces like ceramics, and is excellent for bonding metal and rubber parts.
Properties
- Color
- Appearance
- Clear liquid, Clear hard (Cured)
- Soluble in
- Acetone, MEK, Amide, Methylene Chloride
- Physical Properties
- Typical Properties
- Cured Properties
| Value | Units | Test Method / Conditions | |
| Base Compound (Resin) | Ethyl cyanoacrylate | — | — |
| Viscosity | 900 - 1200 | cPs | — |
| Specific Gravity | 1.05 | — | — |
| Flash Point | 170 - 200 | °F | Tagliabue closed cup |
| Value | Units | Test Method / Conditions | |
| Average Set Time (Full Cure 24 hours, Metal) | 20 - 30 | seconds | — |
| Average Set Time (Full Cure 24 Hours, Plastic) | 10 - 30 | seconds | — |
| Average Set Time (Full Cure 24 Hours, Rubber) | 5 - 10 | seconds | — |
| Average Strength (Steel) | 21.0 | N/mm² | — |
| Value | Units | Test Method / Conditions | |
| Softening Temperature | 300 | °F | — |
| Service Temperature | -65 to 180 | °F | — |
| Hardness Barcol | 65 | — | — |
| Dielectric Constant (at 1 MHz) | 3.33 | — | — |
| Specific Resistance | 8.6x10² | Ω-cm | — |
| Tensile Shear Strength | 2500 | psi | — |
| Gap Filling | 0.008 | inches | — |
Regulatory & Compliance
- Quality Standards
Technical Details & Test Data
- Material Set Up Time
Aluminum to Aluminum 10 to 20 seconds Steel to Steel 20 to 40 seconds Phenolic to Phenolic 10 to 25 seconds Polycarbonate to Polycarbonate 20 to 40 seconds Rubber to Rubber < 10 seconds
Storage & Handling
- Shelf Life
- 1 Year