Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Applications
- Compatible Substrates & Surfaces
- Applications
Because of the 1000 viscosity, it works especially well in bonding porous surfaces like ceramics, and is excellent for bonding metal and rubber parts. The Low Odor/Low Bloom formula works especially well in production plants with limited ventilation.
Properties
- Color
- Appearance
- Clear liquid, Clear hard (Cured)
- Soluble in
- Acetone, MEK, Amide, Methylene Chloride
- Physical Properties
- Typical Properties
- Cured Properties
Value | Units | Test Method / Conditions | |
Base Compound (Resin) | Methoxyethyl cyanoacrylate | — | — |
Viscosity | 900 - 1100 | cPs | — |
Specific Gravity | 1.05 | — | — |
Flash Point | 170 - 200 | °F | Tagliabue closed cup |
Value | Units | Test Method / Conditions | |
Average Set Time (Full Cure 24 hours, Metal) | 10 - 30 | seconds | — |
Average Set Time (Full Cure 24 Hours, Plastic) | 10 - 20 | seconds | — |
Average Set Time (Full Cure 24 Hours, Rubber) | 5.0 | seconds | — |
Average Strength (Steel) | 21.0 | N/mm² | — |
Loctite® Equivalent | 403.0 | — | — |
Permabond® Equivalent | 947.0 | — | — |
Value | Units | Test Method / Conditions | |
Softening Temperature | 330 | °F | — |
Service Temperature | -65 to 250 | °F | — |
Hardness Barcol | 65 | — | — |
Dielectric Constant (at 1 MHz) | 3.33 | — | — |
Specific Resistance | 8.6x10² | Ω-cm | — |
Tensile Shear Strength | 2500 | psi | — |
Gap Filling | 0.008 | inches | — |
Technical Details & Test Data
- Material Set Up Time
Aluminum to Aluminum 10 to 20 seconds Steel to Steel 30 to 75 seconds Phenolic to Phenolic 15 to 30 seconds Polycarbonate to Polycarbonate 25 to 50 seconds Rubber to Rubber < 10 seconds
Storage & Handling
- Shelf Life
- 6 Months