Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Compatible Substrates & Surfaces
- Applications
Because of the 2400 viscosity, it works especially well in bonding porous surfaces like ceramics, and is excellent for bonding metal and rubber parts.
Properties
- Color
- Appearance
- Clear liquid, Clear hard (Cured)
- Soluble in
- Acetone, MEK, Amide, Methylene Chloride
- Physical Properties
- Typical Properties
- Cured Properties
Value | Units | Test Method / Conditions | |
Base Compound (Resin) | Ethyl cyanoacrylate | — | — |
Viscosity | 2300 - 2500 | cPs | — |
Specific Gravity | 1.05 | — | — |
Flash Point | 170 - 200 | °F | Tagliabue closed cup |
Value | Units | Test Method / Conditions | |
Average Set Time (Full Cure 24 hours, Metal) | 25 - 35 | seconds | — |
Average Set Time (Full Cure 24 Hours, Plastic) | 15 - 30 | seconds | — |
Average Set Time (Full Cure 24 Hours, Rubber) | 5 - 10 | seconds | — |
Average Strength (Steel) | 22.0 | N/mm² | — |
Loctite® Equivalent | 422.0 | — | — |
Permabond® Equivalent | 268.0 | — | — |
Value | Units | Test Method / Conditions | |
Softening Temperature | 300 | °F | — |
Service Temperature | -65 to 180 | °F | — |
Hardness Barcol | 65 | — | — |
Dielectric Constant (at 1 MHz) | 3.33 | — | — |
Specific Resistance | 8.6x10² | Ω-cm | — |
Tensile Shear Strength | 2500 | psi | — |
Gap Filling | 0.008 | inches | — |
Regulatory & Compliance
- Quality Standards
Technical Details & Test Data
- Material Set Up Time
Aluminum to Aluminum < 20 seconds Steel to Steel 30 to 50 seconds Phenolic to Phenolic < 40 seconds Polycarbonate to Polycarbonate 50 to 70 seconds Rubber to Rubber < 10 seconds
Storage & Handling
- Shelf Life
- 1 Year