Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Compatible Substrates & Surfaces
- Applications
Because of the 4000 viscosity, it works especially well in poor fitting applications such as rough metal or ceramic repair, unfinished metal to metal bonding, and metal to rubber. This product is a very good, thick, almost gel like adhesive.
Properties
- Color
- Appearance
- Clear liquid, Clear hard (Cured)
- Soluble in
- Acetone, MEK, Amide, Methylene Chloride
- Physical Properties
- Typical Properties
- Cured Properties
Value | Units | Test Method / Conditions | |
Base Compound (Resin) | Ethyl cyanoacrylate | — | — |
Viscosity | 3600 - 4400 | cPs | — |
Specific Gravity | 1.05 | — | — |
Flash Point | 170 - 200 | °F | Tagliabue closed cup |
Value | Units | Test Method / Conditions | |
Average Set Time (Full Cure 24 hours, Metal) | 30 - 60 | seconds | — |
Average Set Time (Full Cure 24 Hours, Plastic) | 20 - 40 | seconds | — |
Average Set Time (Full Cure 24 Hours, Rubber) | 5 - 10 | seconds | — |
Average Strength (Steel) | 22.0 | N/mm² | — |
Loctite® Equivalent | 382.0 | — | — |
Value | Units | Test Method / Conditions | |
Softening Temperature | 300 | °F | — |
Service Temperature | -65 to 180 | °F | — |
Hardness Barcol | 65 | — | — |
Dielectric Constant (at 1 MHz) | 3.33 | — | — |
Specific Resistance | 8.6x10² | Ω-cm | — |
Tensile Shear Strength | 2500 | psi | — |
Gap Filling | 0.009 | inches | — |
Regulatory & Compliance
- Quality Standards
Technical Details & Test Data
- Material Set Up Time
Aluminum to Aluminum < 25 seconds Steel to Steel 30 to 50 seconds Phenolic to Phenolic 50 to 80 seconds Polycarbonate to Polycarbonate 50 to 70 seconds Rubber to Rubber < 10 seconds
Storage & Handling
- Shelf Life
- 1 Year