Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Compatible Substrates & Surfaces
- Applications
Because of the thick gel consistency, it works especially well in poor fitting applications such as rough metal or ceramic repair, unfinished metal to metal bonding, and metal to rubber.
Properties
- Color
- Appearance
- Clear hard (Cured), Clear white gel
- Soluble in
- Acetone, MEK, Amide, Methylene Chloride
- Physical Properties
- Typical Properties
- Cured Properties
Value | Units | Test Method / Conditions | |
Base Compound (Resin) | Surface insensitive ethyl cyanoacrylate | - | - |
Viscosity | Not applicable-thixotropic gel | - | - |
Specific Gravity | 1.05 | - | - |
Flash Point | 170 - 200 | °F | Tagliabue closed cup |
Value | Units | Test Method / Conditions | |
Average Set Time (Full Cure 24 hours, Metal) | 30 - 60 | seconds | - |
Average Set Time (Full Cure 24 Hours, Plastic) | 20 - 40 | seconds | - |
Average Set Time (Full Cure 24 Hours, Rubber) | 5 - 10 | seconds | - |
Average Strength (Steel) | 22.0 | N/mm² | - |
Loctite® Equivalent | 454.0 | - | - |
Permabond® Equivalent | 2011.0 | - | - |
Value | Units | Test Method / Conditions | |
Softening Temperature | 300 | °F | - |
Service Temperature | -65 to 180 | °F | - |
Hardness Barcol | 65 | - | - |
Dielectric Constant (at 1 MHz) | 3.33 | - | - |
Specific Resistance | 8.6x10² | Ω-cm | - |
Tensile Shear Strength | 2500 | psi | - |
Gap Filling | 0.01 | inches | - |
Regulatory & Compliance
- Quality Standards
Technical Details & Test Data
- Material Set Up Time
Aluminum to Aluminum 20 to 30 seconds Steel to Steel 50 to 100 seconds Phenolic to Phenolic < 90 seconds Polycarbonate to Polycarbonate 50 to 70 seconds Rubber to Rubber 10 to 25 seconds
Storage & Handling
- Shelf Life
- 1 Year