Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Applications
- Applications
- Ideal for applications where the temperatures range from -65 to 450°F
- Ideal for thread locking heavy duty applications such as bolts up to ¾” (20 mm) used in transmission, construction equipment or railroad assemblies, etc.
- Lubricated for easy assembly. Prevents loosening and leakage of threaded fasteners. Locks and seals threaded joints-nuts, screws, and studs. To disassemble, apply high heat and use tools.
- Application Method
Surfaces should be dry, clean, and free of any contamination. Thread locker should be applied to the bolt in sufficient quantity to fill threads. This thread locker is specifically formulated to give controlled friction and torque/tension ratio during assembly.
Properties
- Color
- Typical Properties
- Chemical Resistance
- Cured Properties
- Adhesive Properties
| Value | Units | Test Method / Conditions | |
| Loctite® Equivalent | 266.0 | — | — |
| Value | Units | Test Method / Conditions | |
| Initial Strength Retained for Acetone (at 22ºC, 500hrs) | 100 | % | — |
| Initial Strength Retained for Ethanol (at 22ºC, 500hrs) | 100 | % | — |
| Initial Strength Retained for Motor Oil (at 125ºC, 500hrs) | 100 | % | — |
| Initial Strength Retained for Gasoline (at 22ºC, 500hrs) | 100 | % | — |
| Initial Strength Retained for Brake Fluid (at 22ºC, 500hrs) | 100 | % | — |
| Initial Strength Retained for Water/Glycol (at 87ºC, 500hrs) | 90 | % | — |
| Initial Strength Retained for Acetone (at 22ºC, 1000hrs) | 90 | % | — |
| Initial Strength Retained for Ethanol (at 22ºC, 1000hrs) | 100 | % | — |
| Initial Strength Retained for Motor Oil (at 125ºC, 1000hrs) | 100 | % | — |
| Initial Strength Retained for Gasoline (at 22ºC, 1000hrs) | 100 | % | — |
| Initial Strength Retained for Brake Fluid (at 22ºC, 1000hrs) | 100 | % | — |
| Initial Strength Retained for Water/Glycol (at 87ºC, 1000hrs) | 80 | % | — |
| Value | Units | Test Method / Conditions | |
| Handling Cure Time | 20 - 40 | minutes | — |
| Functional Cure Time | 1 - 3 | hrs | — |
| Full Cure Time | 24 | hrs | — |
| Shear Strength | 8 - 12 | N/mm² | — |
| Locking Torque (Break) | 25 - 35 | N.m | — |
| Locking Torque (Prevailing) | 6 - 11 | N.m | — |
| Breakloose Torque | 25 - 35 | N.m | — |
| Temperature Range | -65 to 450 | ºF | — |
| Value | Units | Test Method / Conditions | |
| Color | Red/orange | — | — |
| Composition | Methacrylate ester | — | — |
| Viscosity (at 20 rpm, 25ºC, Brookfield RVT Spindle 3) | 3750 | cPs | — |
| Specific Gravity | 1.17 | — | — |
| Maximum Screw Size | ¾ (20) | inches (mm) | — |
| Flash Point | min. 95 | ºC | — |
| Solvent Content | None | — | — |
Safety & Health
- Precautions
This product and the auxiliary materials normally combined with it are capable of producing adverse health effects ranging from minor skin irritation to serious systemic effects. None of these materials should be used, stored, or transported until the handling precautions and recommendations as stated in the Material Safety Data Sheets (MSDS).
Storage & Handling
- Shelf Life
- 2 Years
- Storage Information
Anaerobic adhesives are ideally stored in a cool, dry place in unopened containers at a room temperature between 46°F to 82°F. Please do not return unused material to its original container.