Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Applications
- Applications
- Typically used as a form-in-place rigid flange connections in high temperature applications
- Excellent chemical resistance
- Typical uses are engine casing and gearboxes
- Thixotropic nature reduces the migration of liquid product after application
- Directions for Use
- For best results, clean all surfaces (external and internal) with a cleaning solvent and allow the solvent to evaporate
- If the material is an inactive metal or the cure speed is too slow, spray with an Activator and allow to dry
- Apply manually as a continuous bead or by screen-painting to one of surface flanges
- Low pressure can be used when testing to confirm a complete seal immediately after assembly
- Flanges should be tightened as soon as possible after assembly to avoid shimming
Properties
- Color
- Physical Form
- Physical Properties
- Typical Properties
- Chemical Resistance
- Cured Properties
- Adhesive Properties
| Value | Units | Test Method / Conditions | |
| Coefficient of Thermal Expansion | 80x10⁻⁶ | K-1 | ASTM D 696 |
| Coefficient of Thermal Conductivity | 0.1 | W/(m.K) | ASTM C 177 |
| Specific Heat | 0.3 | kJ/(kg.K) | — |
| Value | Units | Test Method / Conditions | |
| Primed Average Cure Time | 30 min - 4 hrs | — | — |
| Unprimed Average Cure Time | 4 - 24 | hours | — |
| Loctite® Equivalent | 510.0 | — | — |
| Permabond® Equivalent | MH196 | — | — |
| Permatex® Equivalent | 51031.0 | — | — |
| Value | Units | Test Method / Conditions | |
| Initial Strength Retained for Acetone (at 22ºC, 500hrs) | 100 | % | — |
| Initial Strength Retained for Ethanol (at 22ºC, 500hrs) | 90 | % | — |
| Initial Strength Retained for Motor Oil (at 125ºC, 500hrs) | 100 | % | — |
| Initial Strength Retained for Gasoline (at 22ºC, 500hrs) | 75 | % | — |
| Initial Strength Retained for Brake Fluid (at 22ºC, 500hrs) | 95 | % | — |
| Initial Strength Retained for Water/Glycol (at 87ºC, 500hrs) | 110 | % | — |
| Initial Strength Retained for Acetone (at 22ºC, 1000hrs) | 95 | % | — |
| Initial Strength Retained for Ethanol (at 22ºC, 1000hrs) | 85 | % | — |
| Initial Strength Retained for Motor Oil (at 125ºC, 1000hrs) | 100 | % | — |
| Initial Strength Retained for Gasoline (at 22ºC, 1000hrs) | 75 | % | — |
| Initial Strength Retained for Brake Fluid (at 22ºC, 1000hrs) | 95 | % | — |
| Initial Strength Retained for Water/Glycol (at 87ºC, 1000hrs) | 110 | % | — |
| Value | Units | Test Method / Conditions | |
| Handling Cure Time (Unprimed Surfaces) | 2 - 8 | hrs | — |
| Handling Cure Time (Primed Surfaces) | 0.5 - 4 | hrs | — |
| Compressive Shear Strength of Steel Pins and Collars (After 24 hrs, at 22ºC) | min. 7.5 (1,085) | N/mm² (psi) | ISO 10123 |
| Lap Shear Strength (Steel Grit Based) | 5 (725) | N/mm² (psi) | ISO 4587 |
| Tensile Strength (Steel Grit Based) | 7.5 (1,085) | N/mm² (psi) | ISO 6922 |
| Temperature Range | -65 to 400 | ºF | — |
| Value | Units | Test Method / Conditions | |
| Composition | Dimethacrylate ester | — | — |
| Viscosity (at 20 rpm, 25ºC, Brookfield RVT Spindle 7, Thixotropic) | 188,000 - 500,000 | cPs | — |
| Specific Gravity (at 25ºC) | 1.1 | — | — |
| Flash Point | min. 93 | ºC | — |
| Solvent Content | None | — | — |
Safety & Health
- Precautions
This product and the auxiliary materials normally combined with it are capable of producing adverse health effects ranging from minor skin irritation to serious systemic effects. None of these materials should be used, stored, or transported until the handling precautions and recommendations as stated in the Material Safety Data Sheets (MSDS).
Storage & Handling
- Shelf Life
- 1 Year
- Storage Information
Anaerobic adhesives are ideally stored in a cool, dry place in unopened containers at a room temperature between 46°F to 86°F. Do not return unused material to its original container.