Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Applications
- Compatible Substrates & Surfaces
- Applications
- General purpose thread sealant for a wide variety of pneumatic connections in industrial applications
- Typical applications include, metal and fiber plants paper processing plants, chemical processing plants, waste treatment facilities, textile equipment and processing
- Directions for Use
Surfaces should be dry, clean and free of any contamination. Apply 360° bead of product to the leading threads of the male fitting, leaving the first thread free. Force the material into the threads and voids, adjust product amount accordingly and apply a 360° bead of product on the female threads also. Assemble and tighten as required.
Properties
- Color
- Physical Form
- Appearance
- White paste
- Physical Properties
- Typical Properties
- Chemical Resistance
- Cured Properties
- Adhesive Properties
| Value | Units | Test Method / Conditions | |
| Coefficient of Thermal Expansion | 80x10⁻⁶ | K-1 | ASTM D 696 |
| Coefficient of Thermal Conductivity | 0.1 | W/(m.K) | ASTM C 177 |
| Specific Heat | 0.3 | kJ/(kg.K) | - |
| Value | Units | Test Method / Conditions | |
| Loctite® Equivalent | 567.0 | - | - |
| Permatex® Equivalent | 59235.0 | - | - |
| Value | Units | Test Method / Conditions | |
| Initial Strength Retained for Acetone (at 22ºC, 500hrs) | 70 | % | - |
| Initial Strength Retained for Ethanol (at 22ºC, 500hrs) | 90 | % | - |
| Initial Strength Retained for Motor Oil (at 125ºC, 500hrs) | 100 | % | - |
| Initial Strength Retained for Gasoline (at 22ºC, 500hrs) | 80 | % | - |
| Initial Strength Retained for Brake Fluid (at 22ºC, 500hrs) | 100 | % | - |
| Initial Strength Retained for Water/Glycol (at 87ºC, 500hrs) | 75 | % | - |
| Initial Strength Retained for Acetone (at 22ºC, 1000hrs) | 60 | % | - |
| Initial Strength Retained for Ethanol (at 22ºC, 1000hrs) | 90 | % | - |
| Initial Strength Retained for Motor Oil (at 125ºC, 1000hrs) | 100 | % | - |
| Initial Strength Retained for Gasoline (at 22ºC, 1000hrs) | 80 | % | - |
| Initial Strength Retained for Brake Fluid (at 22ºC, 1000hrs) | 95 | % | - |
| Initial Strength Retained for Water/Glycol (at 87ºC, 1000hrs) | 75 | % | - |
| Value | Units | Test Method / Conditions | |
| Handling Cure Time | 10 - 30 | minutes | - |
| Functional Cure Time | 2 - 4 | hrs | - |
| Full Cure Time | 24 | hrs | - |
| Breakaway Torque (M10 Steel Nuts and Bolts) | min. 1.7 (15) | N.m (lbs.in) | ISO 10964 |
| Prevail Torque (M10 Steel Nuts and Bolts) | 1 (9) | N.m (lbs.in) | ISO 10964 |
| Compressive Shear Strength of Steel Pins and Collars | min. 1 (147) | N/mm² (psi) | ISO 10123 |
| Temperature Range | -65 to 400 | ºF | - |
| Value | Units | Test Method / Conditions | |
| Composition | Methacrylate ester | - | - |
| Viscosity (at 20 rpm, 25ºC, Brookfield RVT Spindle 3) | 540000 | cPs | - |
| Specific Gravity | 1.14 | - | - |
| Flash Point | min. 100 | ºC | - |
| Solvent Content | None | - | - |
Safety & Health
- Precautions
This product and the auxiliary materials normally combined with it are capable of producing adverse health effects ranging from minor skin irritation to serious systemic effects. None of these materials should be used, stored, or transported until the handling precautions and recommendations as stated in the Material Safety Data Sheets (MSDS).
Storage & Handling
- Storage Information
Anaerobic adhesives are ideally stored in a cool, dry place in unopened containers at room temperature, 46°F to 82°F. Do not return unused material to its original container.