Products

Paradigm Labs Antifoam NOS is a specially formulated hydrocarbon type defoamer containing no silicone derivatives. The product is very active and only small quantities are necessary to maintain adequate foam control. Uses include printing, dyeing, and other applications where silicone cannot be tolerated.

Paradigm Labs Resyn 733C is a self-crosslinking resin which can be used as an anticurl, a backing for woven fabrics, a stiffening agent, or in edge gum. It should be applied only on fabrics from which it will not have to be removed. RESYN 733C will crosslink to itself at relatively low temperatures making it difficult to remove from most substrates.

Paradigm Labs Defoamer 019-B was developed for use in textile wet processing, including pad, jig, boil-off, scouring, dyeing, finishing, and printing operations. It shows excellent foam knockdown, even in low concentrations and performs well in extended runs. It is stable over a wide range of pH values as well as temperature changes.

Paradigm Labs Antifoam WA is a scientifically formulated defoamer meeting “Food Chemical Codex” specifications and containing low silicone derivatives. The product is very active and only small quantities are necessary to maintain adequate foam control. Uses include food contact cleaning, printing, dyeing, and other applications where a small amount of silicone can be tolerated.

Paradigm Labs Resyn 733 is a self-crosslinking resin which can be used as an anticurl, a backing for woven fabrics, a stiffening agent, or in edge gum. It should be applied only on fabrics from which it will not have to be removed. RESYN 733 will crosslink to itself at relatively low temperatures making it difficult to remove from most substrates.

Paradigm Labs Resyn 733W is a self-crosslinking resin which can be used as an anticurl, a backing for woven fabrics, a stiffening agent, or in edge gum. It should be applied only on fabrics from which it will not have to be removed. RESYN 733W will crosslink to itself at relatively low temperatures making it difficult to remove from most substrates.

Paradigm Labs Resyn KLM is a thermoplastic polymer especially designed for textile finishing. It can be used on both natural and man-made fiber. It imparts firmness with flexibility. It gives body and weight and serves as an excellent non-curling agent on knits and back coating agent on wovens.

HERRITON RH is applied in concentrations of 1-4% based on the weight of the yarn of fabric. It is generally added first, along with acetic acid to pH 5, run 10 minutes at 120o F, and then the dyestuff is added. HERRITON RH provides maximum color yield and excellent levelness. It promotes even application of the various dye combinations. HERRITON RH is biodegradable, contains no phosphates, and will not contribute to stream or water pollution.

PARACRYL 125 is a vinyl acrylic copolymer designed to give a stiff hand on polyester, cotton, cotton poly, nylon, and wool. It is completely miscible in water and causes little or no shade change on most substrates. It is a self-crossing product that requires no additional additives. It is dyable and can be tinted, if desired.