Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
- Materials Features
- Product Highlights
PolyPhenylene Sulfide (PPS) material series is a semi-crystalline engineering thermoplastic that offers the broadest resistance to chemicals of any high-performance melt fluoropolymer resin. There are no current solvents that affect PPS under 392º F, and it is inert to steam, strong bases, fuels, and acids. PPS is ideal for precise tolerance machined components because it has minimal water absorption, has a very low coefficient of linear thermal expansion, and is stress-relieving manufactured. They are also a great option for structural applications, harsh corrosive environments, and a lower temperature replacement for PEEK. At moderate temperatures, PPS offers great dimensional stability and strength as compared to most other comparable resin choices.
PB40300 is our compression molded PPS reinforced with 40% glass fiber. It offers impressive dimensional stability and an exceptional degree of thermal stability, all while maintaining its strength above 425° F. With its superior chemical and flame resistance and excellent mechanical and electrical properties, PB40300 provides superior performance over a wide range of critical design requirements. Excellent processing characteristics allow PB40300 to meet the needs of demanding, high-precision applications without hesitation!
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Typical Applications
- Instrumentation Parts
- Valve and Pump Components
- Bearings and Bushings (bearing grade)
- Electrical components
Properties
- Color
- Typical Properties
- PPS Properties
- Outstanding chemical resistance
- Resistant to hot water and steam
- Strong Material
- Performs at elevated temperatures
- Good dimensional stability
- High dielectric strength
- Common Brands: Sustatron PPS Tecatron®
Value | Units | Test Method / Conditions | |
Specific gravity | 1.69 | - | ASTM D792 |
Hardness | 89.0 | Shore D | ASTM D2240 |
Tensile Strength (Type V dog bone tested at 0.5 in/min) | 5385.0 | PSI | ASTM D638 |
Elongation at break (Type V dog bone tested at 0.5 in/min) | 0.75 | % | ASTM D638 |
Second Melt Peak Temperature | 545.0 | °F | ASTM D3418 |
Glass Transition Temperature | 194.0 | °F | ASTM D3418 |
Regulatory & Compliance
- Certifications & Compliance