Products

EXOfos PB-136 is an anionic surfactant that belongs to the group of phosphorous esters. This ester is based on tridecyl alcohol ethoxylate and offered in acidic form. In room temperature, the product is provided in the form of clear or lightly murky liquid. The product has acid value ranging from 90 to 150 mg KOH/g and low pour point, i.e. below -20°C.

Chemax polyethylene glycols are available in a range of molecular weights which find utility as lubricants, chemical intermediates and heat transfer agents.

Chemfac PB-184 is widely used as an oil soluble lubricants additive, rust inhibitor and emulsifiers in the metal working industry.

ROKAnol T18 belongs to non-ionic surfactants from the group of ethoxylated fatty alcohols, INCI name: Ceteareth-18. The product is based on high molecular alcohol of natural origin. It is produced in the form of white wax. ROKAnol T18 has excellent emulsifying and dispersing properties. The hydrophilic-lyophilic balance (HLB) value of the product is 16.3, which places it in the group of hydrophilic emulsifiers.

Surmax® CS-586 is an alkaline stable surfactant that imparts high foaming characteristics in liquid cleaner concentrates.

ROKAmid KAD/2A is a non-ionic surfactant with the INCI name ‘Cocamide DEA’. It is based on natural vegetable oils. It has a form of a clear or slightly turbid light-yellow to yellow liquid. ROKAmid KAD/2A is one of the most common co-surfactants, which has a range of very interesting application properties. Most of all, it is used as a rheology modifier, that is a thickener which improves consistence by creating so-called mixed micelles. Among other KAD series ROKAmides, it shows improved thickening properties compared to the ROKAmid KAD or KAD/1A. When mixed with anionic surfactants, it increases and stabilizes the quality of foam. ROKAmid KAD/2A is very effective even at a low concentration.

ROKAmid KAD/1A (Cocamide DEA) is a non-ionic surfactant (INCI name: Cocamide DEA). The product has slightly better thickening properties compared to ROKAmid KAD. It is produced from natural vegetable oils. It is available in the form of a clear or slightly cloudy liquid with a light yellow to yellow color.

POLIkol 600 belongs to the group of polyoxyethylene glycols (PEG with an average molecular weight of 600). The product is available as a high viscosity liquid or a soft white paste. POLIkol 600 is characterized by a wide range of application properties. It has excellent softening, lubricating, solubilizing and moisturizing properties, as well as good antielectrostatic effect and strong hygroscopic properties.

ROKAnol T12 belongs to the group of non-ionic fatty alcohol ethoxylate surfactants, INCI name: Ceteareth-12. The product is based on the high molecular weight alcohol of natural origin. It is produced in the form of a soft white wax.

Chemax CO-40 is commonly used as an emulsifiers and co-emulsifiers in lubricants and softener formulas.

ROKAcet K7 (PEG-7 Cocoate) is a non-ionic surfactant belonging to the group of polyoxyethylene fatty acid esters (INCI name: PEG-7 cocoate). This surfactant occurs in the form of a clear or slightly cloudy liquid, ranging in color from straw to light brown and with a solidification point of about 0°C.

Chemfac phosphate esters exhibit a variety of properties including emulsification, lubrication, cleaning, and wetting. Due to the presence of phosphorous, some of the Chemfac products show excellent extreme pressure (EP) properties in addition to conventional lubricity properties. Certain Chemfacs also exhibit corrosion inhibiting properties when neutralized with amines.

Chemax polyoxyethylated fatty acids are used as emulsifiers and lubricants additives in metal lubricants, textile lubricants, and cosmetic formulations. They are also used as emulsifiers in defoamers and as viscosity control agents in plastisol formulations.

Chemfac phosphate esters exhibit a variety of properties including emulsification, lubrication, cleaning, and wetting. Due to the presence of phosphorous, some of the Chemfac products show excellent extreme pressure (EP) properties in addition to conventional lubricity properties. Certain Chemfacs also exhibit corrosion inhibiting properties when neutralized with amines.

Chemax polyethylene glycols are available in a range of molecular weights which find utility as lubricants, chemical intermediates and heat transfer agents.

EXOdis PC40A is a polymer anionic dispersant intended for paint products. It is supplied in the form of 40% aqueous solution of ammonium salt of polyacrylic acid. The product is a clear or lightly murky yellow liquid.

POLIkol 4500 flakes is a product belonging to the group of polyoxyethylene glycols (PEG with an average molecular weight of 4500), INCI name: PEG-100. The commercial product is available as white to light yellow wax. The solidification point of the product is approximately 55 °C. The product is freely soluble in water, low aliphatic alcohols, ethyl ether and chloroform.

ROKAnol® DB9 is a non-ionic surfactant (ethoxylated fatty alcohols, INCI name: C12-15 Pareth-9). The product belongs to the ROKAnol® DB series which is based on a C12-C15 fatty alcohol. A distinct surface activity allows these products to be used as excellent detergents and cleaning agents, and opens up the possibility of their use in other industries.

SULFOROKAnol L370 (Sodium C12-C15 Pareth Sulfate) is an anionic surfactant from the group of alkyl ether sulfates, based on synthetic alcohol called INCI: Sodium Pareth Sulfate. The product has the consistency of a liquid paste, colorless to light yellow. The concentrated form of the commercial product, which contains 70% of the active substance, translates into an advantageous economic aspect by reducing the costs of storage and transport.

SULFOROKAnol L370/1 (Sodium C12-C14 Laureth Sulfate) is an anionic surfactant of the group of alkyl ether sulfates, based on natural alcohol (INCI name: Sodium Laureth Sulfate). The product has the consistency of a liquid paste, colorless to light yellow. The concentrated form of the commercial product, which contains 70% of the active substance, translates into lower storage and transport cost.

Surmax®CS-521 is used in highly alkaline systems to impart exceptional cleaning, and low foaming properties at temperatures of < 60° C (140° F).

ROKAfenol N14 is a non-ionic surfactant which belongs to the group of ethoxylated nonylphenols (INCI name: Nonoxynol-14). It is used as an ingredient of washing and cleaning products and as an emulsifier.

ROSULfan D (Sodium Decyl Sulfate) is an anionic surfactant from the group of alkyl sulfates. The product is an alkyl sulfate sodium salt and is available as a 35-37% aqueous solution of low viscosity and color from colorless to light yellow. This product shows very good foaming properties, creating high and time-stable foams, even in hard water.

EXOdis PC40 is an anionic polymer dispersant intended for paint products. It is provided in the form of 40% aqueous solution of sodium salt of polyacrylic acid. The product is clear or lightly murky yellow liquid.

Chemfac phosphate esters exhibit a variety of properties including emulsification, lubrication, cleaning, and wetting. Due to the presence of phosphorous, some of the Chemfac products show excellent extreme pressure (EP) properties in addition to conventional lubricity properties. Certain Chemfacs also exhibit corrosion inhibiting properties when neutralized with amines.

The nonionic surfactant used as a semi-finished product of receiving textile preparation.

ABS acid is an anionic surfactant of the alkylbenzene sulfonate group, in acid form. Due to its acidic form, the product is available with an active content of more than 96%. ABS acid is a light brown to dark brown liquid. Thanks to the concentrated form, it is very cost-effective in terms of reducing transport costs.

POLIkol 8000 is a product belonging to the group of polyoxyethylene glycols (PEG with an average molecular weight of 8000), INCI name: PEG-180. The commercial product is available in the form of white to light yellow wax. The solidification point of the product is approximately 55 °C. POLIkol 8000 is freely soluble in water and in low aliphatic alcohols. It is safe, non-toxic and does not cause skin irritation.

Chemeen polyoxyethylated fatty amines are mildly cationic surfactants that become more nonionic in nature with increasing ethylene oxide content. These surfactants are substantive to metals, glass, textiles, plastics, and clays. They are used as emulsifiers and lubricants additives in metal and textile lubricants, antistats for textiles and plastics, textile dyeing assistants, detergents in degreaser formulations, and corrosion inhibitors in numerous applications.

SULFOROKAnol L170/1 (Sodium Laureth Sulfate) is an anionic surfactant from the group of alkyl ether sulfates (INCI name: Sodium Laureth Sulfate). The product is mainly based on raw material of natural origin. It has the consistency of liquid paste, colorless to pale yellow. The product is available in a concentrated form as a 70% aqueous solution, which translates into a favorable economic aspect in terms of transport and storage. SULFOROKAnol L170/ does not contain preservatives and is completely soluble in water, including hard water.

ROKAnol O3 belongs to non-ionic surfactants from the group of ethoxylated fatty alcohols (INCI name: Oleth-3) of a moderately lipophilic character. It is produced in the form of a clear or turbid, straw to pale yellow liquid. The product is based on natural raw materials, which makes ROKAnol O3 highly biodegradable. Another advantage is the low content of free ethylene oxide and 1,4-dioxane.

GREENLINETM Soda Lye (50% aqueous solution) belongs to inorganic chemical compounds from the hydroxide group. The product is manufactured in an environmentally friendly production process based on membrane technology, which is currently the most modern technology in the world. Membrane technology uses significantly less energy compared to other methods for obtaining sodium hydroxide. In addition, the energy consumed in the production of GREENLINETM Soda Lye is covered by guarantees of origin of energy from renewable energy sources. These guarantees are issued only for energy produced from renewable sources, contributing to a significant reduction in CO2 emissions into the atmosphere.

ROKAfenol N6 (Nonoxynol-6) is a non-ionic surfactant belonging to the group of ethoxylated nonylphenols (INCI name: Nonoxynol-6). It is an oily liquid with a color of up to 70 HU. The cloud point of this product for butyldiglycol/water solution is in the range of 60-65°C. The freezing point is about 0°C and the active ingredient content is approximately 100%. The product is sparingly soluble in water and forms emulsions.

Chemeen polyoxyethylated fatty amines are mildly cationic surfactants that become more nonionic in nature with increasing ethylene oxide content. These surfactants are substantive to metals, glass, textiles, plastics, and clays. They are used as emulsifiers and lubricants additives in metal and textile lubricants, antistats for textiles and plastics, textile dyeing assistants, detergents in degreaser formulations, and corrosion inhibitors in numerous applications.

Chemax EMX-1155 is designed for use in metal forming operations from stamping to deep draw applications. This material may comprise from 20–25% of a typical forming compound which would then be diluted to 5–50% based on severity of the operation.

ROKAmin K5 is a non-ionic surfactant with the INCI name ‘PEG-5 Cocamine’. It belongs to ethoxylated fatty amines with an average ethoxylation of 5 mols. The commercial product contains approximately 100% of the active substance. ROKAmin K5 has a form of a clear liquid with the color of amber. Its freezing point is approx. -19°C. The product dissolves well in water. Due to the presence of the oxyethylene double chain at the nitrogen atom, the product has a combination of action in the application as a nonionic and cationic surfactant, especially in acid systems. Owing to its cationic character, a molecule of ROKAmin K5 can create a single film on a metal surface. Consequently, the product shows an anti-corrosion effect, in particular on ferrous metals.