Products

POLIkol 4500 flakes is a product belonging to the group of polyoxyethylene glycols (PEG with an average molecular weight of 4500), INCI name: PEG-100. The commercial product is available as white to light yellow wax. The solidification point of the product is approximately 55 °C. The product is freely soluble in water, low aliphatic alcohols, ethyl ether and chloroform.

Rokopol® F3600 is a polyether polyol, a block/statistical copolymer of ethylene oxide and propylene oxide based on glycerine. It exists in the form of homogeneous, clear liquid. It contains antioxidants (excluding BHT). It has hydroxyl value within the range of 45–50 mgKOH/g, and dynamic viscosity within the range of 540-620 mPas.

Rostabil DDPP is an alkyl-aryl phosphite in the form of a clear, homogeneous liquid with a characteristic, delicate fragrance. It is used as a process stabilizer in plastics processing. It prevents degradation of polymer materials providing thermal and process protection. The use of Rostabil DDPP stabilizer eliminates the effect of yellowing of materials. It significantly enhances the color stability of pigment-containing materials and provides transparency to non-pigmented products.

Rokryl KSP is an aqueous dispersion of acrylic-styrene copolymer with a solid content of about 50% by mass. The product is a viscous, white to cream-colored liquid. Its solidification point is about 0°C. Special care should be taken when storing the product so as not to cool it below its freezing point. This results in the loss of the product's functional properties.

POLIkol 6000 flakes is a product belonging to the group of polyoxyethylene glycols (PEG with an average molecular weight of 6000), INCI name: PEG-135. The commercial product is available in the form of white to light yellow wax flakes. The solidification point of the product is 52-58 °C. The product is freely soluble in water and in low aliphatic alcohols. It is safe, non-toxic and does not cause skin irritation.

ROKAmer 1010 belongs to the group of non-ionic block copolymers of ethylene oxide and propylene oxide (ROKAmer series). The product concentration is about 100%. The product is in the form of a white solid. Its solidification point is 49-52°C. The product does not have a cloud point in the water, which means that it forms clear solutions even in very hot water, i.e. up to 100°C.

POLIkol 4500 is a product belonging to the group of polyoxyethylene glycols (PEG with an average molecular weight of 4500), INCI name: PEG-100. The commercial product is available as a white to light yellow wax. The solidification point of the product is approximately 55 °C. The product is freely soluble in water, low aliphatic alcohols, ethyl ether and chloroform.

POLIkol 6000 is a product belonging to the group of polyoxyethylene glycols (PEG with an average molecular weight of 6000), INCI name: PEG-135. The commercial product is available in the form of white to light yellow wax. The solidification point of the product is 52-58°C. The product is freely soluble in water and in low aliphatic alcohols. It is safe, non-toxic and does not cause skin irritation.

ROKAmer PP4000 is a polyol (polyoxypropylene diol) with an average molar mass of about 4000 g/mol. The product is a polymer with a double-action structure, which is caused by the presence of two hydrophilic groups in the molecule. This attribute distinguishes the group of ROKAmers from other non-ionic surfactants, and determines their properties. ROKAmer PP4000 can therefore be classified as a product with anti-foaming properties, dedicated mainly to industrial processes.

Rostabil DPDP is a secondary antioxidant in the form of a homogeneous liquid with a characteristic, delicate fragrance. It effectively prevents degradation of polymeric materials, eliminating the effect of yellowing of finished products. Rostabil DPDP stabilizes the polymer processing process, providing effective thermal protection. At the same time, it significantly enhances the color stability of pigment-containing materials and provides transparency to non-pigmented products.

PCC Chemax DME Aerosol is an organic compound from the group of ethers. It is a colorless gas with a characteristic odor, moderately soluble in water. The product in aerosol is used as a propellant (factor for discharging content). It is used instead of the previously applied CFCs, as it has no harmful effect on the ozone layer. The product is therefore environmentally friendly. DME in the aerosol present in a concentration of not less than 99.99%. It is produced in the dehydration of methanol followed by DME rectification.

ROKAdis 900 is an effective wetting and dispersing agent used in paint production and in the construction industry. It is produced as a colorless or light yellow liquid. ROKAdis 900 is intended for the formulation of pigment concentrates based on inorganic pigments, where its excellent dispersion and wetting properties are an important advantage.

EXOdis PC30 is a anionic polymer dispersant intended for paint products. It is provided in the form of 30% aqueous solution of sodium salt of polyacrylic acid. The product is clear or lightly murky yellow liquid.

POLIkol 3000 flakes belongs to the group of polyoxyethylene glycols (PEG with an average molecular weight of 3000), INCI name: PEG-60. The commercial product is available in the form of white to light yellow wax flaxes. The solidification point of the product is approximately 55 °C. The product is freely soluble in water, low aliphatic alcohols, ethyl ether and chloroform.

POLIkol 2000 is a product belonging to the group of polyoxyethylene glycols (PEG with an average molecular weight of 2000), INCI name: PEG-45. The commercial product is available as a white to light yellow wax. The solidification point of the product is approximately 50 °C. The product is freely soluble in water, low aliphatic alcohols, ethyl ether and chloroform.

ROKAmer PP2000 is a polyol (polyoxypropylene diol) with an average molar mass of about 2000 g/mol. The product is a polymer with a double-action structure, which is caused by the presence of two hydrophilic groups in the molecule. This distinguishes the ROKAmers PP from other non-ionic surfactants, and determines their properties. ROKAmer PP2000 can therefore be classified as a product with anti-foaming properties, dedicated mainly to industrial processes.

POLIkol 3000 is a product belonging to the group of polyoxyethylene glycols (PEG with an average molecular weight of 3000), INCI name: PEG-60. The commercial product is available as white to light yellow wax. The solidification point of the product is approximately 55 °C. The product is freely soluble in water, low aliphatic alcohols, ethyl ether and chloroform.

ROKAnol® NB8W belongs to non-ionic surfactants (ethoxylated fatty alcohols). The product is based on a synthetic C9-C16 alcohol. High surface activity enables the use of this product in detergents and cleaning agents. The commercial product contains approximately 85% of the active substance. It is a clear or turbid liquid with a tendency to delaminate over time, solidifying at a temperature of about -5°C. ROKAnol® NB8W has hydrophilic properties, which makes it well soluble in water and low aliphatic alcohols.