Products

ROKAnol NL5 is a non-ionic surfactant from the group of ethoxylated alcohols (INCI name: C9-11 Pareth-5). The product belongs to the ROKAnol NL series based on C9-C11 synthetic alcohol. The high surface activity of these compounds is used in detergents and cleaning agents. The commercial product contains about 100% of the active substance and takes the form of a clear or turbid liquid, solidifying at a temperature below 0°C.

SULFOROKAnol L270/1 (Sodium Laureth Sulfate) is an anionic surfactant from the group of alkyl ether sulfates (INCI name: Sodium Laureth Sulfate). It is based mainly on raw material of natural origin. The product is available as a liquid paste, colorless to light yellow, and has a concentrated form - a 70% aqueous solution, which reduces transport and storage costs. The product does not contain any preservatives. SULFOROKAnol L270/1 shows complete solubility even in hard water.

ROKAnol T18 belongs to non-ionic surfactants from the group of ethoxylated fatty alcohols, INCI name: Ceteareth-18. The product is based on high molecular alcohol of natural origin. It is produced in the form of white wax. ROKAnol T18 has excellent emulsifying and dispersing properties. The hydrophilic-lyophilic balance (HLB) value of the product is 16.3, which places it in the group of hydrophilic emulsifiers.

ROKAnol IT9 is a non-ionic surfactant of the group of ethoxylated fatty alcohols (INCI name: Isotrideceth-9). The product is part of a large group of surfactants based on isotridecyl alcohol, iso-C13. ROKAnol IT9 contains about 100% active substance. It is a liquid with the consistency of oil or paste.

ROKAmid KAD/2A is a non-ionic surfactant with the INCI name ‘Cocamide DEA’. It is based on natural vegetable oils. It has a form of a clear or slightly turbid light-yellow to yellow liquid. ROKAmid KAD/2A is one of the most common co-surfactants, which has a range of very interesting application properties. Most of all, it is used as a rheology modifier, that is a thickener which improves consistence by creating so-called mixed micelles. Among other KAD series ROKAmides, it shows improved thickening properties compared to the ROKAmid KAD or KAD/1A. When mixed with anionic surfactants, it increases and stabilizes the quality of foam. ROKAmid KAD/2A is very effective even at a low concentration.

ABSNa 50 belongs to the group of anionic surfactants and is the sodium salt of alkyl benzene sulfonic acid with a concentration of 50%. The product is in the form of concentrated paste, which translates into economic benefits, for example in the case of using the product for the production of washing powders.

POLIkol 600 belongs to the group of polyoxyethylene glycols (PEG with an average molecular weight of 600). The product is available as a high viscosity liquid or a soft white paste. POLIkol 600 is characterized by a wide range of application properties. It has excellent softening, lubricating, solubilizing and moisturizing properties, as well as good antielectrostatic effect and strong hygroscopic properties.

ROKAnol IT7 is a non-ionic surfactant from the group of ethoxylated fatty alcohols (INCI name: Isotrideceth-7). The product belongs to the ROKAnol IT series, forming a large group of surfactants based on isotridecyl alcohol (C13). The product contains about 99% of the active substance.

ROKAnol T12 belongs to the group of non-ionic fatty alcohol ethoxylate surfactants, INCI name: Ceteareth-12. The product is based on the high molecular weight alcohol of natural origin. It is produced in the form of a soft white wax.

SULFOSUCCINATE DOSS70GP is an anionic surfactant with a concentrated active substance content (70%) in propylene glycol (INCI name: Diethylhexyl Sodium Sulfosuccinate). It is a surfactant with limited water solubility. Due to its unique molecular structure, the product has a strong wetting effect on highly hydrophobic materials such as anthracite carbon.

ROKAcet K7 (PEG-7 Cocoate) is a non-ionic surfactant belonging to the group of polyoxyethylene fatty acid esters (INCI name: PEG-7 cocoate). This surfactant occurs in the form of a clear or slightly cloudy liquid, ranging in color from straw to light brown and with a solidification point of about 0°C.

ROKAmin K15 is a non-ionic surfactant belonging to the group of ethoxylated coconut amines with an average degree of ethoxylation of 15 moles. It has the form of a liquid with a characteristic smell. The product's INCI name is: PEG-15 Cocamine.

POLIkol 4500 flakes is a product belonging to the group of polyoxyethylene glycols (PEG with an average molecular weight of 4500), INCI name: PEG-100. The commercial product is available as white to light yellow wax. The solidification point of the product is approximately 55 °C. The product is freely soluble in water, low aliphatic alcohols, ethyl ether and chloroform.

Rokopol® F3600 is a polyether polyol, a block/statistical copolymer of ethylene oxide and propylene oxide based on glycerine. It exists in the form of homogeneous, clear liquid. It contains antioxidants (excluding BHT). It has hydroxyl value within the range of 45–50 mgKOH/g, and dynamic viscosity within the range of 540-620 mPas.

SULFOROKAnol L370 (Sodium C12-C15 Pareth Sulfate) is an anionic surfactant from the group of alkyl ether sulfates, based on synthetic alcohol called INCI: Sodium Pareth Sulfate. The product has the consistency of a liquid paste, colorless to light yellow. The concentrated form of the commercial product, which contains 70% of the active substance, translates into an advantageous economic aspect by reducing the costs of storage and transport.

ROSULfan D (Sodium Decyl Sulfate) is an anionic surfactant from the group of alkyl sulfates. The product is an alkyl sulfate sodium salt and is available as a 35-37% aqueous solution of low viscosity and color from colorless to light yellow. This product shows very good foaming properties, creating high and time-stable foams, even in hard water.

Rostabil TTDP is a specialist additive for plastics used as a process stabilizer. It is available in the form of a homogeneous liquid with a characteristic, delicate fragrance. It prevents degradation of polymer materials during processing. Provides thermal protection of polymers, eliminating the effect of yellowing of finished products. Strengthens the color stability of materials containing pigments and provides transparency of non-pigmented products.

Rostabil DDPP is an alkyl-aryl phosphite in the form of a clear, homogeneous liquid with a characteristic, delicate fragrance. It is used as a process stabilizer in plastics processing. It prevents degradation of polymer materials providing thermal and process protection. The use of Rostabil DDPP stabilizer eliminates the effect of yellowing of materials. It significantly enhances the color stability of pigment-containing materials and provides transparency to non-pigmented products.

ABS acid is an anionic surfactant of the alkylbenzene sulfonate group, in acid form. Due to its acidic form, the product is available with an active content of more than 96%. ABS acid is a light brown to dark brown liquid. Thanks to the concentrated form, it is very cost-effective in terms of reducing transport costs.

POLIkol 8000 is a product belonging to the group of polyoxyethylene glycols (PEG with an average molecular weight of 8000), INCI name: PEG-180. The commercial product is available in the form of white to light yellow wax. The solidification point of the product is approximately 55 °C. POLIkol 8000 is freely soluble in water and in low aliphatic alcohols. It is safe, non-toxic and does not cause skin irritation.

SULFOROKAnol L170/1 (Sodium Laureth Sulfate) is an anionic surfactant from the group of alkyl ether sulfates (INCI name: Sodium Laureth Sulfate). The product is mainly based on raw material of natural origin. It has the consistency of liquid paste, colorless to pale yellow. The product is available in a concentrated form as a 70% aqueous solution, which translates into a favorable economic aspect in terms of transport and storage. SULFOROKAnol L170/ does not contain preservatives and is completely soluble in water, including hard water.

Rokryl KSP is an aqueous dispersion of acrylic-styrene copolymer with a solid content of about 50% by mass. The product is a viscous, white to cream-colored liquid. Its solidification point is about 0°C. Special care should be taken when storing the product so as not to cool it below its freezing point. This results in the loss of the product's functional properties.

GREENLINETM Soda Lye (50% aqueous solution) belongs to inorganic chemical compounds from the hydroxide group. The product is manufactured in an environmentally friendly production process based on membrane technology, which is currently the most modern technology in the world. Membrane technology uses significantly less energy compared to other methods for obtaining sodium hydroxide. In addition, the energy consumed in the production of GREENLINETM Soda Lye is covered by guarantees of origin of energy from renewable energy sources. These guarantees are issued only for energy produced from renewable sources, contributing to a significant reduction in CO2 emissions into the atmosphere.

Roflam B7 is a halogen-free flame retardant in the form of a colorless liquid with low dynamic viscosity. Due to its excellent compatibility with many liquid raw materials, it is successfully used in polyurethane plastics, epoxy resins, vinyl ester resins and unsaturated polyester resins. Among the products belonging to the group of triaryl phosphoric esters, it is distinguished by being non-lethal to human health.

Rodys O is the sodium salt of naphthalenesulfonic acid polycondensates with formaldehyde, offered as a 40% aqueous solution. The technology of Rodys O production allows to obtain a product containing trace amounts of free formaldehyde and naphthalene. As a result, it neither has an environmental classification, nor does it affect the content of free aromatic hydrocarbons in the products for which it is used. Among the Rodys product series, Rodys O has a high degree of polymerization.

Rokopol® M5020 is a polyether polyol produced in the KOH technology. It exists in the form of homogeneous, clear liquid. It contains antioxidants (excluding BHT). It has hydroxyl value within the range of 33-38 mgKOH/g, and dynamic viscosity within the range of 700-1000 mPas at temp. 25°C

ROKAmin K5 is a non-ionic surfactant with the INCI name ‘PEG-5 Cocamine’. It belongs to ethoxylated fatty amines with an average ethoxylation of 5 mols. The commercial product contains approximately 100% of the active substance. ROKAmin K5 has a form of a clear liquid with the color of amber. Its freezing point is approx. -19°C. The product dissolves well in water. Due to the presence of the oxyethylene double chain at the nitrogen atom, the product has a combination of action in the application as a nonionic and cationic surfactant, especially in acid systems. Owing to its cationic character, a molecule of ROKAmin K5 can create a single film on a metal surface. Consequently, the product shows an anti-corrosion effect, in particular on ferrous metals.

Roksol EMB 2 is a mineral oil emulsifier used in the metallurgical industry. The product is a complex mixture of surfactants and functional additives improving lubricating properties. Does not contain nitrites, phenols, DEA, chlorine or boron compounds harmful to health. The product is a clear liquid mixture with a viscous oil consistency and a light to dark brown color.

Rokopol® M6000 is a polyether polyol produced in the KOH technology. It exists in the form of homogeneous, clear liquid. It contains antioxidants (excluding BHT). It has hydroxyl value within the range of 27-29 mgKOH/g, and its dynamic viscosity is within the range of 1050-1250 mPas at temp. 25°C.

Roksol HSG is a fire resistant hydraulic fluid for mining, coke, iron and steel and metallurgical industries. The product is based on natural oil, surfactants, glycols, polymers, corrosion inhibitors and a special package of enhancing additives and water. It is a mixture in the form of red, oily liquid with a cloudiness tendency.

Rokopol® M5000 is a polyether polyol produced in the KOH technology. It exists in the form of homogeneous, clear liquid. It contains antioxidants (excluding BHT). It has hydroxyl value within the range of 33-35 mgKOH/g and dynamic viscosity within the range of 700-960 mPas at temp. 25°C.

SULFOROKAnol L327/1 (Sodium C12-C14 Laureth Sulfate) is an anionic surfactant from the group of alkyloterosulphates, based on natural alcohol (INCI name: Sodium Laureth Sulfate). The product has the consistency of a low-viscosity, clear, colorless to pale yellow liquid. The commercial product contains 27-29% of the active substance. The anionic character of the product influences the synergistic effect with non-ionic, amphoteric and anionic surfactants in final formulations.

SULFOROKnol L270-1 MB is a derivative of palm kernel oil from certified crops. This product is RSPO Mass Balance certified SULFOROKAnol L270/1 MB is an anionic surfactant from the group of alkyl ether sulfates (INCI name: Sodium Laureth Sulfate). It is based mainly on raw material of natural origin. The product is available as a liquid paste, colorless to light yellow, and has a concentrated form - a 70% aqueous solution, which reduces transport and storage costs. The product does not contain any preservatives. SULFOROKAnol L270/1 MB shows complete solubility even in hard water.

The raw material used for production ROKAnol® T12 MB is a derivative of palm kernel oil and comes from certified crops. This product is RSPO Mass Balance certified. ROKAnol® T12 MB belongs to the group of non-ionic fatty alcohol ethoxylate surfactants, INCI name: Ceteareth-12. The product is based on the high molecular weight alcohol of natural origin. It is produced in the form of a soft white wax.

ROKAnol IT6 belongs to non-ionic surfactants from the group of ethoxylated fatty alcohols (INCI name: Isotrideceth-6). The product belongs to ROKAnol IT series, a large group of surface active products based on isotridecyl alcohol (iso-C13). The commercial form of ROKAnol IT6 contains about 100% of the active substance.

ROKAmid KAD/2A MB is a derivative of palm kernel oil and comes from certified crops. This product is RSPO Mass Balance certified ROKAmid KAD/2A MB is a non-ionic surfactant with the INCI name ‘Cocamide DEA’. It is based on natural vegetable oils. It has a form of a clear or slightly turbid light-yellow to yellow liquid. ROKAmid KAD/2A MB is one of the most common co-surfactants, which has a range of very interesting application properties. Most of all, it is used as a rheology modifier, that is a thickener which improves consistence by creating so-called mixed micelles. Among other KAD series ROKAmides, it shows improved thickening properties compared to the ROKAmid KAD or KAD/1A. When mixed with anionic surfactants, it increases and stabilizes the quality of foam. ROKAmid KAD/2A MB is very effective even at a low concentration.