Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Chemical Name
- Plastics & Elastomers Functions
- CAS No.
- 1889-67-4
- EC No.
- 217-568-2
- Technologies
Features & Benefits
- Labeling Claims
Applications & Uses
- Applications
- Compatible Polymers & Resins
- Plastics & Elastomers End Uses
- Recommended Applications
Polymerization of ethylene : PEROXAN PK234 V is used for high pressure in both autoclave and tubular processes, usually in combination with other peroxides of varying degrees of activity. Temperature range: 190 to 250°C Light-off temperature at 2300 bar: 219°C
Polymerization of styrene: PEROXAN PK234 V may be used in polymerization and copolymarization of styrene. In a mass process PEROXAN PK234 V can be used to increase polymerization rates. In suspension polymerization processes, PEROXAN PK234 V is often used for reduction of residual styrene content during the final polymerization stage. Temperature range: 90 to 130°C Dosing: 0,02 to 0,1 phr
Polymerization of acrylates and methacrylates: PEROXAN PK234 V can be used as initiator for the solution, bulk and suspension (co)polymerization of acrylates and methacrylates. Temperature range: 100 to 140°C Dosing: 0,1 to 1 phr
Other applications: PEROXAN PK234 V may also be used for the (co)polymerization of acrylonitrile and divinylbenzene.
Properties
- Physical Form
- Appearance
- Clear Liquid
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Active oxygen assay | appx. 6.83 | % | — |
| Density at 20°C | 0.81 | g/cm³ | — |
| Molecular Weight | 234.2 | — | — |
| Peroxide assay | appx. 50 | % | — |
Technical Details & Test Data
- Half Life Information
t ½ 10 h 1 h 1 min bei 98°C 116°C 153°C - Major Decomposition Products
- 2-Methoxy-2-methylpropane
- Acetone
- Ethane
- Carbon dioxide
- Methane
- tert-Butanol
Safety & Health
- Safety Characteristics
SADT 70°C
Packaging & Availability
- Packaging Information
- 20kg container
Storage & Handling
- Shelf Life
- 6 Months
- Product Handling and Storage
- Maximum storage temperature (Ts max) : 30°C
- Storage stability as from date of delivery : 6 months
- Organic Peroxides are more or less stable products but will decompose under the influence of heat. To minimize a loss of quality during storage, it is important that the recommended maximum storage temperature is not exceeded. If a minimum storage temperature is given, an undesirable process such as a solidification or phase separation, is known to occur below this temperature.
- Please refer to the material safety data sheet (MSDS) for information concerning safe storage, use and handling of PEROXAN PK234 V.