Petkim PETOPLEN MH220N - HPP - Thermoforming

Knowde Enhanced TDS

Identification & Functionality

Features & Benefits

Labeling Claims: Non-Hazardous,
Non-Toxic,
Recyclable
Materials Features: Good Optical Properties,
High Gloss,
High Impact Performance,
High Stiffness,
Low Shrinkage

Applications & Uses

Markets: Consumer Goods,
Printing & Packaging
Applications: Consumer Goods — Housewares
Consumer Goods — Other Consumer Goods Applications
Printing & Packaging — Packaging
Food & Beverage Packaging,
Non-Food Consumer Packaging,
Other Packaging Materials
Plastics & Elastomers End Uses: Cosmetic Packaging,
Cups,
Front Spoiler,
Household Goods,
Rigid Films,
Rigid Packaging,
Side Spoiler,
Thermoformed Cups,
Thermoformed Trays,
Thermoforming Applications,
Thin Walled Packaging,
Tool/Tote Box,
Trays
Plastics & Elastomers Processing Methods: Thermoforming
Applications: Thermoforming: thin wall packaging applications, high clarity cups, trays and boxes
Recommended Processing Conditions Processing Conditions: Sheet extrusion applications;
Typical barrel temperature: 200 - 235°C
Typical upper roll temperature: 50 - 60°C
Typical middle roll temperature: 60 - 70°C
Typical lower roll temperature: 50 - 60°C
Processing conditions should be optimized for different equipment design.

Properties

	Value	Units	Test Method / Conditions
Tensile Strength at Yield	40	MPa	ASTM D638
Flexural Modulus, 23°C	1750	MPa	TS EN ISO 178
Izod Impact Strength at 23°C (notched)	40	J/m	ASTM D256
Rockwell Hardness	99	Scale R	ASTM D785

	Value	Units	Test Method / Conditions
Heat Deflection Temperature at 0.45 MPa	89	°C	ISO 75

Regulatory & Compliance

Certifications & Compliance: Regulation (EU) No. 10/2011 (PIM)
Compliance to Regulations: Thermoforming: thin wall packaging applications, high clarity cups, trays and boxes
Recycling: The product is not hazardous or toxic and it is suitable for recycling using available recycling methods.

Packaging & Availability

Packaging: The material is packaged in PE bags or in PP Big Bags. The product should be stored in a dry area with an ambient temperature below 50°C. It should be kept away from sunlight, sparks, heat and flame.

Storage & Handling

Storage: Inappropriate storage conditions can lead to bad smell, color changes and the deterioration in physical properties. It is advised to process PP resins within 6 months after delivery.