Products

PELEMOL® 354 is the triester formed by the reaction of Glycerin with Oleic Acid. It finds application as an occlusive skin conditioning agent as well as in bath and makeup products. Use concentrations can vary from 2 or 3% to as much as 10%.

PECOSIL® G-600 is a slightly hazy silicone gel that provides luxurious emolliency, spreadability, and cushion to all skin products. It leaves the skin with a pronounced silky, powdery, light waxy elegance. PECOSIL® G-600 is not water soluble and acts as a moisture barrier that contributes to softness in all makeup, skin and sunscreen products. The sensory properties contributed by PECOSIL® G-600 are proportional to the concentration of PECOSIL® G-600 used and can vary from 2 – 50%.

PECOSIL® DDL is the diester resulting from the esterification of Dimethiconol and Lactic Acid. It is a 100% active liquid that spreads easily on skin leaving the skin with a silicone-like, silky soft “feel”. In addition to its use in skin creams and lotions its use is also clearly indicated in haircare products for conditioning and manageability as well as in lipstick and makeup products. It is postulated that enzymes found in the skin’s epidermis will hydrolyze esters and free up the corresponding alpha-hydroxyl acid so it may perform its exfoliating affect. PECOSIL® DDL not only provides moisturization through a semi-occlusive barrier effect, but also delivers the alpha-hydroxyl acid (lactic acid) via a slow release owing to the skin’s own natural esterase.

Pumpkin Seed Oil, known for its skin moisturizing properties is now available as BIOGEL Pumpkin Seed Butter. BIOGEL® Pumpkin Seed Butter results from the controlled hydrogenation of Cucurbita Pepo (Pumpkin Seed Oil). It is 100% active and 100% vegetable derived. BIOGEL® Pumpkin Seed Butter also functions as an emollient skin conditioning product and is useful in hair dressing preparations. BIOGEL® Pumpkin Seed Butter is NOT a blended product.

PELEMOL® EC is composed of the ethyl esters of Canola Oil acids. It is a clear, 100% vegetable derived and 100% active liquid. Surprisingly, PELEMOL® EC exhibits a distinct silicone-like “feel” on skin and, in particular, much like cyclomethicone D5 and low viscosity silicone fluids. Moreover, the solubility profiles for PELEMOL® EC versus cyclomethicone D5 are virtually identical. This suggests ease of formulation and perhaps one-to-one replacement. The refractive indexes for cyclomethicone D5 (1.397) and PELEMOL® EC (1.461) suggest that PELEMOL® EC will provide enhanced sheen in formulations. Use levels can range from 2 – 20%.

BIOGEL® HEMP SEED BUTTER results from the controlled hydrogenation of Cannabis Sativa Seed Oil. It is 100% active and 100% vegetable derived. BIOGEL® HEMP SEED BUTTER functions as an emollient skin conditioning agent in creams and lotions and also finds application in hair care products. BIOGEL® HEMP SEED BUTTER is not a blended product.

Phoenix Chemical offers sustainable partially and fully hydrogenated BIOGEL 100% vegetable butters. They are soft pastes that melt at skin temperature, spread easily and are very emollient and non-greasy. As can be seen from the attached solubility table, they are generally miscible in oils, silicones, and esters. They can be liquefied with vegetablebased esters such as PELEMOL P-810 (Propanediol Dicaprylate/Dicaprate) to form liquid 100% vegetable-based emollients. The butters can be emulsified with PELEMOL P-1263 (Polyglyceryl-10 Hexaoleate (and) Polyglyceryl-6 Polyricinoleate) to form w/o emulsions which can invert to o/w as the water phase increases. Other useful emulsifiers to be considered are PELEMOL GMB (Glyceryl Behenate), and PELEMOL GMR (Glyceryl Ricinoleate).

PELEMOL® EHEMP is a product of the ethyl esters of Hemp Seed Oil. It is an extremely dry ester with a slight initial silicone feel that becomes dry on rub-in. PELEMOL® EHEMP feels like cyclopentasiloxane, D5 and is an effective D5 substitute. The sensory perception is that it is gone, as is D5. PELEMOL® EHEMP is 100% active and 100% vegetable derived. It is not a blended product. As a dry ester, PELEMOL® EHEMP finds application in skin creams and lotions, and makeup products. Use levels can vary from 5 – 30%.

Phoenix Chemical offers sustainable partially and fully hydrogenated BIOGEL 100% vegetable butters. They are soft pastes that melt at skin temperature, spread easily and are very emollient and non-greasy. As can be seen from the attached solubility table, they are generally miscible in oils, silicones, and esters. They can be liquefied with vegetablebased esters such as PELEMOL P-810 (Propanediol Dicaprylate/Dicaprate) to form liquid 100% vegetable-based emollients. The butters can be emulsified with PELEMOL P-1263 (Polyglyceryl-10 Hexaoleate (and) Polyglyceryl-6 Polyricinoleate) to form w/o emulsions which can invert to o/w as the water phase increases. Other useful emulsifiers to be considered are PELEMOL GMB (Glyceryl Behenate), and PELEMOL GMR (Glyceryl Ricinoleate).

Phoenix Chemical offers sustainable partially and fully hydrogenated BIOGEL 100% vegetable butters. They are soft pastes that melt at skin temperature, spread easily and are very emollient and non-greasy. As can be seen from the attached solubility table, they are generally miscible in oils, silicones, and esters. They can be liquefied with vegetablebased esters such as PELEMOL P-810 (Propanediol Dicaprylate/Dicaprate) to form liquid 100% vegetable-based emollients. The butters can be emulsified with PELEMOL P-1263 (Polyglyceryl-10 Hexaoleate (and) Polyglyceryl-6 Polyricinoleate) to form w/o emulsions which can invert to o/w as the water phase increases. Other useful emulsifiers to be considered are PELEMOL GMB (Glyceryl Behenate), and PELEMOL GMR (Glyceryl Ricinoleate).

Phoenix Chemical offers sustainable partially and fully hydrogenated BIOGEL 100% vegetable butters. They are soft pastes that melt at skin temperature, spread easily and are very emollient and non-greasy. As can be seen from the attached solubility table, they are generally miscible in oils, silicones, and esters. They can be liquefied with vegetablebased esters such as PELEMOL P-810 (Propanediol Dicaprylate/Dicaprate) to form liquid 100% vegetable-based emollients. The butters can be emulsified with PELEMOL P-1263 (Polyglyceryl-10 Hexaoleate (and) Polyglyceryl-6 Polyricinoleate) to form w/o emulsions which can invert to o/w as the water phase increases. Other useful emulsifiers to be considered are PELEMOL GMB (Glyceryl Behenate), and PELEMOL GMR (Glyceryl Ricinoleate).