Products

Cel-Span® CFA 840 is a 40% active endothermic foaming agent concentrate, suitable for a variety of olefin resins such as polyethylene and polypropylene. Cel-Span® CFA 840 is recommended for extrusion, injection, and structural foam molding of polyolefins.

Cel-Span® CFA 844 is a highly loaded 80% active endothermic foaming agent formulated for applications with high gas requirements. Cel-Span® CFA 844 concentrate releases carbon dioxide gas upon decomposition. This product is safe when used under the conditions of intended use. Upon complete decomposition (activation) of the C.F.A., the extruded and injected parts will become white, a color common to endothermic chemical foaming agents.

Cel-Span® CFA 899 is a 40% active endothermic foaming agent concentrate recommended for extrusion applications for a variety of thermoplastic resins such as polyethylene, polypropylene, styrene, MPPO, and ABS. Cel-Span® CFA 899 is recommended for extrusion, and structural foam molding of applications that require a very fine cell structure compared to a typical endothermic foaming agent in esthetic applications.

Cel-Span® CFA 899PS is a 20% active endothermic foaming agent concentrate recommended for extrusion applications for a variety of thermoplastic resins such as polyethylene, polypropylene, styrene, MPPO, and ABS. Cel-Span® CFA 899PS is recommended for extrusion, and structural foam molding of applications that require a very fine cell structure compared to a typical endothermic foaming agent in esthetic applications.

Gaia® Antimicrobial AB 505 is an organic concentrate that helps to control or retard the growth of bacteria, fungus, and algae in plastic molded parts. Gaia® Antimicrobial AB 505 is a powerful additive concentrate produced in an LLDPE carrier resin for ease of dispersion. This product has been used in film, injection molding, and extrusion applications to control growth of bacteria, yeast, mold, and algae. In independent testing, Gaia® Antimicrobial AB 505 has been shown to inhibit ecoli and staphylococcus. A loading of 1.5% - 3% will protect plastic articles for an estimated 1 – 2 years. Recommended temperature range should not reach above 428°F.

Cel-Span® FR 611 is a pelletized antimony and brominated concentrate that meets stringent flammability requirements defined by industry standards. Cel-Span® FR 611 is recommended for electrical sockets, timers, and light fixtures plus other applications where a UL rating is required.

Cel-Span® Process Aid 101 is a 100% active (powder or pellet) internal lubricant processing aid with anti-static properties that are incorporated into the resin. Cel-Span® Process Aid 101 eliminates the need for an external mold release agent and improves resin flow, dispersion, resin additives ex:(reinforcements, fillers, and pigments), and reduces cycle time. The use of Cel-Span® Process Aid 101 will not have an adverse effect on the physical properties. Compatible with Polyethylene, Polystyrene, and Polypropylene.

Cel-Span® UVS 717 is a (HALS) concentrate containing a stabilizer package for injection blow molding, extrusion and film applications for polyethylene. Hindered Amine Light stabilizers are the most effective light stabilizers for polyolefins. HALS is extremely efficient because these special additives continuously repopulate themselves during the UV stabilization process.

Cel-Span® Process Aid 305 contains a powerful water-seeking additive that chemically combines and eliminates lensing and porosity in blown and cast extrusion, injection, compounding, and pipe applications caused by surface moisture or incorporated into the resin during processing. CelSpan® Process Aid 305 contains a very effective additive that chemically traps water to eliminate moisture. This product can be used to eliminate moisture in high temperature engineering resins such as nylon and is utilized by metering in at 2% - 5% depending on the level of moisture.