Products

35 MELT FLOW CLARIFIED RANDOM COPOLYMER FOR INJECTION MOLDING Pinnacle Polymers Polypropylene 6135C3 is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.This product is intended for injection molding applications that require more stiffness, faster cycle time, low bloom, improved color, enhanced processability and excellent clarity. This product was produced using no organic peroxides. This product contains a new generation clarifier.The 6135C3 product provides: Improved FDA food contact status Reduced cycle-time Excellent organoleptics Increased stiffness Low bloom Excellent impact resistance Pinnacle 6135C3 as marketed by Pinnacle Polymers Company, in natural, uncolored pellet form is cleared by way of FCN 1538 for use in single- and repeated-use articles intended to contact all types of food under the Food and Drug Administration's (FDA) Conditions of Use A through H. FDA has not evaluated the use of this product in contact with infant formula or breast milk.

8 MELT FLOW HIGH IMPACT COPOLYMER FOR INJECTION MOLDING Pinnacle Polymers Polypropylene 4208 is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.This product is intended for general extrusion or injection molding applications. Also contains a long term heat aging additive system. Has superior high and low temperature impact.The 4208 product provides: Wet/Dry environment resistance Superior balance of stiffness and impact strength Excellent long term heat aging properties Excellent color and processing stability Enhanced weld-line strength Pinnacle's 4208 polypropylene is covered under US FDA Food Contact Notification 864. As such, this polymer can be used in contact with all food types under Conditions of Use A-H, as described in 21 CFR 176.170, Tables 1 and 2. This polymer also complies with 21 CFR 177.1520(c), items 3.1(a) and 3.2(a).

35 MELT FLOW MEDIUM IMPACT COPOLYMER FOR INJECTION MOLDING Pinnacle Polymers Polypropylene 2135H is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.This product is intended for packaging, housewares and consumer products applications.The 2135H product provides: High stiffness and impact strength High melt flow Excellent mold release Superior processability Excellent lot-to-lot consistency UL Listed Pinnacle's 2135H polypropylene is covered under US FDA Food Contact Notification 864. As such, this polymer can be used in contact with all food types under Conditions of Use A-H, as described in 21 CFR 176.170, Tables 1 and 2. This polymer also complies with 21 CFR 177.1520(c), items 3.1(a) and 3.2(a).

21 MELT FLOW HOMOPOLYMER POLYPROPYLENE WITH NUCLEATION AND ANTISTAT FOR INJECTION MOLDING Pinnacle Polymers Polypropylene 1120 H is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.This product is intended for general-purpose injection molding of cutlery, closures and thin wall containers. 1120 H contains both a nucleation and antistatic additive package.The 1120 H product provides: Superior color and processing stability Good flow characteristics Low odor and taste Antistatic properties UL Listed Pinnacle's polypropylene, as marketed by Pinnacle Polymers, in natural, uncolored pellet form complies with appropriate requirements of CFR Title 21, Part 177, Subpart B, Section 177.1520 (c) 1.1a entitled "Olefin Polymers" of the Food Additives Amendment of 1958 to the United States Food, Drug and Cosmetic Act of 1938.

35 MELT FLOW HOMOPOLYMER Pinnacle Polymers Polypropylene 1635AF is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.This product is intended for injection molding; the flow properties should be of particular benefit in the production of thin-walled articles. It contains no nucleators, antistats or animal derivatives.Potential applications include: healthcare/medical packaging, labware, containers and thin-wall articles in general.The 1635AF highlights: Heat Sterilizable (autoclavable) Contains no animal derivatives Excellent color and processing stability Low Extractables Pinnacle's polypropylene, as marketed by Pinnacle Polymers Company, in natural, uncolored pellet form complies with appropriate requirements of CFR Title 21, Part 177, Subpart B, Section 177.1520 (c) 1.1a entitled "Olefin Polymers" of the Food Additives Amendment of 1958 to the United States Food, Drug and Cosmetic Act of 1938.

20 MELT FLOW HIGH IMPACT COPOLYMER FOR INJECTION MOLDING Pinnacle Polymers Polypropylene 3220 is made via UNIPOL PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.This product is intended for injection molding of automotive and consumer product applications. Also contains a long-term heat aging additive system.The 3220 product provides: Excellent balance of stiffness and impact strength Excellent long term heat aging properties Excellent color and processing stability Superior weld-line strength UL Listed Pinnacle's 3220 polypropylene is covered under US FDA Food Contact Notification 864. As such, this polymer can be used in contact with all food types under Conditions of Use A-H, as described in 21 CFR 176.170, Tables 1 and 2. This polymer also complies with 21 CFR 177.1520(c), items 3.1(a) and 3.2(a).

55 MELT FLOW CLARIFIED RANDOM COPOLYMER FOR INJECTION MOLDING Pinnacle Polymers Polypropylene 5155C3 is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.This product is intended for injection molding applications that require high melt flow, fast cycle time, enhanced processability and excellent clarity. This product also has improved impact resistance and a new generation clarifier.The 5155C3 product provides: Improved FDA food contact status New generation clarifier Improved color Excellent impact resistance High melt flow, excellent processability Pinnacle 5155C3 as marketed by Pinnacle Polymers Company, in natural, uncolored pellet form is cleared by way of FCN 1538 for use in single- and repeated-use articles intended to contact all types of food under the Food and Drug Administration's (FDA) Conditions of Use A through H. FDA has not evaluated the use of this product in contact with infant formula or breast milk.

20 MELT FLOW IMPACT COPOLYMER POLYPROPYLENE Pinnacle Polymers Polypropylene 2120H is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.This product is intended for large buckets and other injection molding applications where toughness and cold temperature impact strength are required.The 2120H product provides: Excellent cleanliness Superior toughness Excellent color and process stability Good melt strength Fast Set-up time UL Listed Pinnacle's 2120H polypropylene is covered under US FDA Food Contact Notification 864. As such, this polymer can be used in contact with all food types under Conditions of Use A-H, as described in 21 CFR 176.170, Tables 1 and 2. This polymer also complies with 21 CFR 177.1520(c), items 3.1(a) and 3.2(a).

20 MELT FLOW ULTRA HIGH IMPACT COPOLYMER FOR INJECTION MOLDING Pinnacle Polymers Polypropylene 4220H is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.This product is intended for injection molding of flooring, automotive, appliance, lawn and garden products, and industrial applications. Provides an excellent base stock for compounding of filled and reinforced grades.The 4220H product provides: High impact and melt flow Superior balance of stiffness and impact strength Excellent color and processing stability UL Listed It is characterized by its easy mold flow and high impact at both room and sub-ambient conditions.Pinnacle's 4220H polypropylene is covered under US FDA Food Contact Notification 864. As such, this polymer can be used in contact with all food types under Conditions of Use A-H, as described in 21 CFR 176.170, Tables 1 and 2. This polymer also complies with 21 CFR 177.1520(c), items 3.1(a) and 3.2(a).

8 MELT FLOW HIGH IMPACT COPOLYMER FOR INJECTION MOLDING Pinnacle Polymers Polypropylene 3208 is made via UNIPOL PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.This product is intended for injection molding of automotive and consumer product applications. Also contains a long-term heat aging additive system.The 3208 product provides: Wet/Dry environment resistance Superior balance of stiffness and impact strength Excellent long term heat aging properties Excellent color and processing stability Enhanced weld-line strength Pinnacle's 3208 polypropylene is covered under US FDA Food Contact Notification 864. As such, this polymer can be used in contact with all food types under Conditions of Use A-H, as described in 21 CFR 176.170, Tables 1 and 2. This polymer also complies with 21 CFR 177.1520(c), items 3.1(a) and 3.2(a).

55 MELT FLOW MEDIUM IMPACT COPOLYMER POLYPROPYLENE FOR INJECTION MOLDING Pinnacle Polymers Polypropylene 2150H is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.This controlled rheology copolymer is intended for use in thin wall injection molded packaging, housewares and consumer products applications. Contains nucleator and antistatic.The 2150H product provides: High stiffness Excellent impact at 23°C and -30°C High melt flow Excellent mold release Superior processability Excellent lot-to-lot consistency UL Listed Pinnacle's 2150H polypropylene is covered under US FDA Food Contact Notification 864. As such, this polymer can be used in contact with all food types under Conditions of Use A-H, as described in 21 CFR 176.170, Tables 1 and 2. This polymer also complies with 21 CFR 177.1520(c), items 3.1(a) and 3.2(a).

35 MELT FLOW CLARIFIED RANDOM COPOLYMER FOR INJECTION MOLDING Pinnacle Polymers Polypropylene 5135C3 is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.This product is intended for injection molding applications that require fast cycle time, improved color, enhanced processability and excellent clarity.The 5135C3 product provides: Improved FDA food contact status Improved color Improved processability Excellent lot-to-lot consistency Excellent impact resistance Pinnacle 5135C3 as marketed by Pinnacle Polymers Company, in natural, uncolored pellet form is cleared by way of FCN 1538 for use in single- and repeated-use articles intended to contact all types of food under the Food and Drug Administration's (FDA) Conditions of Use A through H. FDA has not evaluated the use of this product in contact with infant formula or breast milk.

35 MELT FLOW HOMOPOLYMER POLYPROPYLENE WITH NUCLEATION AND ANTISTAT FOR THIN WALL INJECTION MOLDING Pinnacle Polymers Polypropylene 1335 Z is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.This product is intended for thin-wall injection molded applications including closures, food containers and miscellaneous consumer products applications that require high stiffness.The 1335 Z product provides: Superior color and processing stability Low odor and taste Excellent flow characteristics High stiffness and fast set-up behavior UL Listed Pinnacle's polypropylene, as marketed by Pinnacle Polymers, in natural, uncolored pellet form complies with appropriate requirements of CFR Title 21, Part 177, Subpart B, Section 177.1520 (c) 1.1a entitled "Olefin Polymers" of the Food Additives Amendment of 1958 to the United States Food, Drug and Cosmetic Act of 1938.

35 MELT FLOW CLARIFIED HOMOPOLYMER Pinnacle Polymers Polypropylene 1335C3 is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.This product is intended for injection molding applications requiring good see-through clarity. Contains new technology clarifier for superior clarity.The 1335C3 product provides: Superior clarity Good melt strength and stretchability Superior color and processing stability Excellent cleanliness Pinnacle's 1335C3 polypropylene, as marketed by Pinnacle Polymers Company, in natural, uncolored pellet form complies with appropriate requirements of CFR Title 21, Part 177, Subpart B, Section 177.1520 (c) 1.1a entitled "Olefin Polymers" of the Food Additives Amendment of 1958 to the United States Food, Drug and Cosmetic Act of 1938.

12 MELT FLOW CLARIFIED RANDOM COPOLYMER FOR INJECTION MOLDING Pinnacle Polymers Polypropylene 5112C3 is made via UNIPOL™ PP technology, which utilizes gas- phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.This product is intended for injection molding applications that require low melt flow, fast cycle time, enhanced processability and excellent clarity. This product also has improved impact resistance and a new generation clarifier.The 5112C3 product provides: Improved FDA food contact status New generation clarifier Improved color Excellent impact resistance Pinnacle 5112C3 as marketed by Pinnacle Polymers Company, in natural, uncolored pellet form is cleared by way of FCN 1538 for use in single- and repeated-use articles intended to contact all types of food under the Food and Drug Administration's (FDA) Conditions of Use A through H. FDA has not evaluated the use of this product in contact with infant formula or breast milk.

18 MELT FLOW HIGH STIFFNESS COPOLYMER POLYPROPYLENE FOR INJECTION MOLDINGPinnacle Polymers Polypropylene 8118H is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.This copolymer is intended for use in housewares, consumer products and any application requiring both high stiffness and good impact. Contains nucleator and antistat.The 8118H product provides: High stiffness and good impact strength Excellent mold release Superior processability Excellent lot-to-lot consistency Pinnacle's polypropylene, as marketed by Pinnacle Polymers Company, in natural, uncolored pellet form complies with appropriate requirements of CFR Title 21, Part 177, Subpart B, Section 177.1520 (c) 3.1a entitled "Olefin Polymers" of the Food Additives Amendment of 1958 to the United States Food, Drug and Cosmetic Act of 1938.

80 MELT FLOW CLARIFIED RANDOM COPOLYMER FOR INJECTION MOLDING Pinnacle Polymers Polypropylene 6180C3 is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.This product is intended for injection molding applications that require high melt flow, more stiffness, faster cycle time, low bloom, enhanced processability and excellent clarity. This product contains a new generation clarifier.The 6180C3 product provides: Improved FDA food contact status Low bloom High melt flow, excellent processability Increased stiffness Reduced cycle-time Improved color Increased stiffness Pinnacle 6180C3 as marketed by Pinnacle Polymers Company, in natural, uncolored pellet form is cleared by way of FCN 1538 for use in single- and repeated-use articles intended to contact all types of food under the Food and Drug Administration's (FDA) Conditions of Use A through H. FDA has not evaluated the use of this product in contact with infant formula or breast milk.

35 MELT FLOW CLARIFIED RANDOM COPOLYMER FOR INJECTION MOLDING WITH RADIATION RESISTANCEPinnacle Polymers Polypropylene 7135G is made via UNIPOL™ PP technology, which utilizes gas- phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.7135G is specially formulated to resist degradation when exposed to high energy radiation. This product is intended for injection molding applications that require fast cycle time, enhanced processability and excellent clarity.This product is not formulated to contain any fluorescing agents.The 7135G product provides: Radiation sterilizable Improved FDA food contact status Excellent lot-to-lot consistency Excellent impact resistance Low extractables Pinnacle 7135G as marketed by Pinnacle Polymers Company, in natural, uncolored pellet form is cleared by way of FCN 1538 for use in single- and repeated-use articles intended to contact food types I, II, IV-B, VI, VII-B and VII under the Food and Drug Administration-s Conditions of Use B through H. FDA has not evaluated the use of this product in contact with infant formula or breast milk.

12 MELT FLOW HOMOPOLYMER POLYPROPYLENE WITH NUCLEATION AND ANTISTAT FOR INJECTION MOLDING Pinnacle Polymers Polypropylene 1112 Z is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.This product is intended for general-purpose injection molding of cutlery, closures and thin wall containers. 1112 Z contains both a nucleation and antistatic additive package.The 1112 Z product provides: Superior color and processing stability Good flow characteristics Low odor and taste Antistatic properties Pinnacle's polypropylene, as marketed by Pinnacle Polymers, in natural, uncolored pellet form complies with appropriate requirements of CFR Title 21, Part 177, Subpart B, Section 177.1520 (c) 1.1a entitled "Olefin Polymers" of the Food Additives Amendment of 1958 to the United States Food, Drug and Cosmetic Act of 1938.

35 MELT FLOW IMPACT COPOLYMER FOR INJECTION MOLDING Pinnacle Polymers Polypropylene 2135N is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.This product is intended for packaging, housewares and consumer products requiring higher Flex and toughness. Contains nucleator, but no antistatic.The 2135N product provides: High stiffness and excellent impact strength High melt flow Fast cycle-time Superior processability Excellent lot-to-lot consistency Pinnacle's 2135N polypropylene is covered under US FDA Food Contact Notification 864. As such, this polymer can be used in contact with all food types under Conditions of Use A-H, as described in 21 CFR 176.170, Tables 1 and 2. This polymer also complies with 21 CFR 177.1520(c), items 3.1(a) and 3.2(a).

65 MELT FLOW IMPACT COPOLYMER FOR INJECTION MOLDING Pinnacle Polymers Polypropylene 2160H is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.This controlled rheology copolymer is intended for use in thin wall injection molded packaging, housewares and consumer products applications. High Melt Flow improves cycle-times without forfeiting impact. Contains nucleator and antistat.The 2160H product provides: High stiffness Excellent impact at 23°C and -30°C Very high melt flow Excellent mold release Superior processability Excellent lot-to-lot consistency UL Listed Pinnacle's 2160H polypropylene is covered under US FDA Food Contact Notification 864. As such, this polymer can be used in contact with all food types under Conditions of Use A-H, as described in 21 CFR 176.170, Tables 1 and 2. This polymer also complies with 21 CFR 177.1520(c), items 3.1(a) and 3.2(a).

10 MELT FLOW RANDOM COPOLYMER FOR INJECTION MOLDING Pinnacle Polymers Polypropylene 5110H is made via UNIPOL™ PP technology, which utilizes gas- phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.This product is intended for general purpose injection molding applications. This product contains a nucleation and antistatic additive package.The 5110H product provides: Improved FDA food contact status Superior color and processing stability Low odor Good flow and set-up behavior Antistatic properties Excellent lot-to-lot consistency Pinnacle 5110H as marketed by Pinnacle Polymers Company, in natural, uncolored pellet form is cleared by way of FCN 1538 for use in single- and repeated-use articles intended to contact all types of food under the Food and Drug Administration's (FDA) Conditions of Use A through H. FDA has not evaluated the use of this product in contact with infant formula or breast milk.

100 MELT FLOW CLARIFIED RANDOM COPOLYMER FOR INJECTION MOLDING Pinnacle Polymers Polypropylene 6199C3 is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.This product is intended for injection molding applications that require very high melt flow, more stiffness, faster cycle time, low bloom, enhanced processability and excellent clarity. This product contains a new generation clarifier.The 6199C3 product provides: Very high melt flow Improved FDA food contact status Low bloom Excellent processability Increased stiffness Reduced cycle-time Improved color Pinnacle 6199C3 as marketed by Pinnacle Polymers Company, in natural, uncolored pellet form is cleared by way of FCN 1538 for use in single- and repeated-use articles intended to contact all types of food under the Food and Drug Administration's (FDA) Conditions of Use A through H. FDA has not evaluated the use of this product in contact with infant formula or breast milk.

4.6 MELT FLOW PP HOMOPOLYMER FOR EXTRUSION AND INJECTION MOLDING WITH LONG TERM HEAT AGING RESISTANCE Pinnacle Polymers Polypropylene 1204 is made via UNIPOL PP technology, which utilizes gasphase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency. This product is intended for extrusion and injection molding of appliance and other consumer product applications. Also contains a long term heat aging additive system.

22 MELT FLOW HOMOPOLYMER POLYPROPYLENE WITH ANTISTAT AND NUCLEATION FOR INJECTION MOLDING Pinnacle Polymers Polypropylene 1120 Z is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.This product is intended for molding of cutlery, closures, thin wall containers and other consumer products. 1120 Z contains both a nucleation and antistatic additive system.The 1120 Z product provides: Superior stiffness Good static charge dissipation High speed processing: very fast cycle time Excellent mold release Pinnacle's polypropylene, as marketed by Pinnacle Polymers, in natural, uncolored pellet form complies with appropriate requirements of CFR Title 21, Part 177, Subpart B, Section 177.1520 (c) 1.1a entitled "Olefin Polymers" of the Food Additives Amendment of 1958 to the United States Food, Drug and Cosmetic Act of 1938.

45 MELT FLOW HOMOPOLYMER POLYPROPYLENE WITH NUCLEATOR AND ANTISTAT FOR THIN WALL INJECTION MOLDINGPinnacle Polymers Polypropylene 1345Z is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.This product is intended for thin-wall injection molded applications including closures, food containers and miscellaneous consumer products applications that require high stiffness.The 1345Z product provides: Superior set-up behavior Excellent color and processing stability Low odor and taste Excellent flow characteristics High stiffness Nucleation and antistat This product, as marketed by Pinnacle Polymers Company, in natural, uncolored pellet form complies with appropriate requirements of CFR Title 21, Part 177, Subpart B, Section 177.1520 (c) 1.1a entitled "Olefin Polymers" of the Food Additives Amendment of 1958 to the United States Food, Drug and Cosmetic Act of 1938.

100 MELT FLOW IMPACT COPOLYMER POLYPROPYLENE FOR INJECTION MOLDING Pinnacle Polymers Polypropylene 2199H is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.This controlled rheology copolymer is intended for use in thin wall injection molded packaging, housewares and consumer products applications. Ulta High Melt Flow dramatically improves cycle-times without forfeiting properties. Contains nucleator and antistat.The 2199H product provides: Excellent cycle-time Very high melt flow Excellent mold release Superior processability Excellent lot-to-lot consistency

12 MELT FLOW HOMOPOLYMER FOR INJECTION MOLDING Pinnacle Polymers Polypropylene 1112 is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.This product is intended for general-purpose injection molding such as resin furniture, closures, and consumer product applications.The 1112 product provides: Excellent color and processing stability Good flow characteristics Excellent organoleptic properties UL Listed Pinnacle's polypropylene, as marketed by Pinnacle Polymers, in natural, uncolored pellet form complies with appropriate requirements of CFR Title 21, Part 177, Subpart B, Section 177.1520 (c) 1.1a entitled "Olefin Polymers" of the Food Additives Amendment of 1958 to the United States Food, Drug and Cosmetic Act of 1938.

8 MELT FLOW MEDIUM IMPACT COPOLYMER POLYPROPYLENE Pinnacle Polymers Polypropylene 2108 is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.This product is intended for sheet extrusion, thermoformed containers, and injection molding applications where toughness and cold temperature impact strength are required.The 2108 product provides: Excellent cleanliness Superior toughness Excellent color and process stability Good melt strength UL Listed Pinnacle's 2108 polypropylene is covered under US FDA Food Contact Notification 864. As such, this polymer can be used in contact with all food types under Conditions of Use A-H, as described in 21 CFR 176.170, Tables 1 and 2. This polymer also complies with 21 CFR 177.1520(c), items 3.1(a) and 3.2(a).

35 MELT FLOW CLARIFIED RANDOM COPOLYMER FOR INJECTION MOLDING Pinnacle Polymers Polypropylene 5135I3 is made via UNIPOL? PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.This product is intended for injection molding applications that require fast cycle time, enhanced processability and excellent clarity. This product also has improved impact resistance and enhanced mold-release.The 5135I3 product provides: Improved FDA food contact status New generation clarifier Improved color Excellent impact resistance Enhanced mold-release properties Pinnacle 5135I3 as marketed by Pinnacle Polymers Company, in natural, uncolored pellet form is cleared by way of FCN 1538 for use in single- and repeated-use articles intended to contact all types of food under the Food and Drug Administration's (FDA) Conditions of Use A through H. FDA has not evaluated the use of this product in contact with infant formula or breast milk.

55 MELT FLOW HIGH IMPACT COPOLYMER FOR INJECTION MOLDING Pinnacle Polymers Polypropylene 4150H is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.This product is intended for thin-wall injection molding of housewares, industrial applications and consumer products requiring superior impact properties. Its high melt flow allows for quick filling of molds. Contains nucleator and antistat.It is characterized not only by its easy mold flow, but also high impact at both room and sub-ambient conditions.The 4150H product provides: Ultra high impact Superior balance of stiffness and impact strength Very high melt flow Fast cycle-time Pinnacle's 4150H polypropylene is covered under US FDA Food Contact Notification 864. As such, this polymer can be used in contact with all food types under Conditions of Use A-H, as described in 21 CFR 176.170, Tables 1 and 2. This polymer also complies with 21 CFR 177.1520(c), items 3.1(a) and 3.2(a).

55 MELT FLOW CLARIFIED RANDOM COPOLYMER FOR INJECTION MOLDING Pinnacle Polymers Polypropylene 6155C3 is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.This product is intended for injection molding applications that require high melt flow, more stiffness, faster cycle time, low bloom, enhanced processability and excellent clarity. This product contains a new generation clarifier.The 6155C3 product provides: Improved FDA food contact status Low bloom Reduced cycle-time Improved color Increased stiffness High melt flow, excellent processability Pinnacle 6155C3 as marketed by Pinnacle Polymers Company, in natural, uncolored pellet form is cleared by way of FCN 1538 for use in single- and repeated-use articles intended to contact all types of food under the Food and Drug Administration's (FDA) Conditions of Use A through H. FDA has not evaluated the use of this product in contact with infant formula or breast milk.

38 MELT FLOW HIGH FLEX IMPACT COPOLYMER FOR INJECTION MOLDINGPinnacle Polymers Polypropylene 8238H is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physicalproperties and lot-to-lot consistency.This product is intended for thin wall injection molding applications. Its high melt flow allows for quick filling of molds. Also designed for use in compounding.The 8238H product provides: High Flexural Modulus Superior balance of stiffness and impact strength Long Term Heat Stability Nucleated Fast cycle-time Pinnacle's polypropylene, as marketed by Pinnacle Polymers Company, in natural, uncolored pellet form complies with appropriate requirements of CFR Title 21, Part 177, Subpart B, Section 177.1520 (c) 3.1a entitled "Olefin Polymers" of the Food Additives Amendment of 1958 to the United States Food, Drug and Cosmetic Act of 1938.

20 MELT FLOW RANDOM COPOLYMER FOR INJECTION MOLDING Pinnacle Polymers Polypropylene 5120H is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.This product is intended for caps, closures, and general purpose injection molding applications. This product contains a nucleation and antistatic additive package.The 5120H product provides: Improved FDA food contact status Superior color and processing stability Low odor Good flow and set-up behavior Antistatic properties Excellent lot-to-lot consistency Pinnacle 5120H as marketed by Pinnacle Polymers Company, in natural, uncolored pellet form is cleared by way of FCN 1538 for use in single- and repeated-use articles intended to contact all types of food under the Food and Drug Administration's (FDA) Conditions of Use A through H. FDA has not evaluated the use of this product in contact with infant formula or breast milk.

35 MELT FLOW ULTRA HIGH IMPACT COPOLYMER FOR INJECTION MOLDING Pinnacle Polymers Polypropylene 4130H is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.This product is intended for injection molding of flooring, automotive, appliance, lawn and garden products, and industrial applications. Its high melt flow allows for quick filling of molds.The 4130H product provides: Ulta high impact and melt flow Superior balance of stiffness and impact strength Excellent color and processing stability Fast cycle-time It is characterized not only by its easy mold flow, but also high impact at both room and sub-ambient conditions.Pinnacle's 4130H polypropylene is covered under US FDA Food Contact Notification 864. As such, this polymer can be used in contact with all food types under Conditions of Use A-H, as described in 21 CFR 176.170, Tables 1 and 2. This polymer also complies with 21 CFR 177.1520(c), items 3.1(a) and 3.2(a).

11 MELT FLOW HIGH IMPACT COPOLYMER FOR INJECTION MOLDING Pinnacle Polymers Polypropylene 4211 is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.This product is intended for injection molding of automotive, appliance, lawn and garden products, consumer and industrial applications. Provides an excellent base stock for compounding of filled and reinforced grades.The 4211 product provides: Wet/Dry environment resistance Superior balance of stiffness and impact strength Excellent color and processing stability Enhanced weld-line strength It is characterized by its easy mold flow and high impact at both room and sub ambient conditions.Pinnacle's 4211 polypropylene is covered under US FDA Food Contact Notification 864. As such, this polymer can be used in contact with all food types under Conditions of Use A-H, as described in 21 CFR 176.170, Tables 1 and 2. This polymer also complies with 21 CFR 177.1520(c), items 3.1(a) and 3.2(a).