Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
Features & Benefits
- Labeling Claims
- CASE Ingredients Features
- Characteristics
- Good compatibility with most polymer lattices used in tape and labeling PSA adhesives, including acrylic, PVA, EVA and SBR lattices.
- APEO and solvent free.
- Might precipitate if mixed with cationic lattices or other cationic substances.
- When mixing with other substances, it might need slow addition in order to prevent precipitation or grit formation.
- It is advisable to stir before using, in order to promote an even distribution of the dispersion.
Applications & Uses
- Applications
- Compatible Polymers & Resins
- Adhesive & Sealant Type
- Applications
- Recommended as tackifier to be used with acrylic, PVA, EVA and SBR lattices in pressure sensitive adhesives for labeling.
- It promotes strong adhesion to high and low energy surfaces and a fair level of cohesion.
Properties
- Physical Form
- Typical Properties
Value | Units | Test Method / Conditions | |
pH Value | 8.0 | — | — |
Acid Number (discontinues phase) | 125.0 | mg KOH/g | — |
Average Particle Size (d50) | 200.0 | nm | — |
Softening Point (of discontinues phase, R&B) | 60.0 | ºC | — |
Solid Content | 52.0 | % | — |
Viscosity (spindle nr.3, 60 rpm, 25ºC) | 150.0 | mPa.s | Brookfield LVT |
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Quality Standards
- Regulatory Status
All components in Aquadhes®grave; 6102 are listed in EINECS (European Inventory of Existing Commercial Chemical Substances).
Packaging & Availability
- Packaging Type
- Form of Supply
IBC´s (1000 kg), Road Tanks.
Storage & Handling
- Storage Recommendations
- Aquadhes®grave; 6102 resin dispersion is solvent-free and must be protected from freezing.
- We also advise to avoid an extended storage at a temperature over 35°C.
- To prevent evaporation and subsequent skin formation or formation of coarse particle, keep containers or drums closed.
- Shelf Life
Up to three months under normal storage conditions. Following positive evaluation of product condition, it can be used after three months.