Plastchim-T FXCLS (20 µm)

Identification & Functionality

Features & Benefits

Applications & Uses

Markets: Printing & Packaging
Applications: Printing & Packaging — Packaging
Industrial & Transport Packaging
Printing & Packaging — Printing & Inks
Flexography,
Gravure Printing
Usage Recommendations: It is recommended that BOPP film should be tempered at operating room temperature for 24 hours before use

Metalized films should be laminated because the metal layer is not resistant to scratches

Before printing on metalized films, it is strongly recommended to apply a primer

Properties

	Value	Units	Test Method / Conditions
Average Thickness Deviation	2.5	%	—
Yield	52.15 - 57.64	m²/kg	—
Unit Weight	17.29 - 19.11	g/m²	—
Gloss (45°)	83 - 87	—	ASTM D 2457
Haze	1.8 - 2.2	%	ASTM D 1003
Coefficient of Friction	0.22 - 0.32	—	ASTM D 1894
Shrinkage (MD, 120°C, 5 min)	4.0	%	BMS TT 0.2
Shrinkage (TD, 120°C, 5 min)	2.0	%	BMS TT 0.2
Sealing Range	90 - 145	—	—
Seal strength (N/15 mm, 130°C, 1 bar 1sec)	2.3 - 3.3	—	BMS TT 0.1
Seal strength (N/15 mm, 95°C, 1 bar 1sec)	2 - 3	—	Internal Test
OTR	1900.0	cc/m²/day	ASTM D3985
WVTR	6.5	gr/m²/day	ASTM F1249
Elongation at Break (MD)	180 - 240	%	ASTM D 882
Elongation at Break (TD)	50 - 110	%	ASTM D 882
Tensile Strength (MD)	125 - 155	MPa	ASTM D 882
Tensile Strength (TD)	225 - 255	MPa	ASTM D 882
Surface Treatment	min. 38	dynes/cm	ASTM D 2578a

Regulatory & Compliance

Food Contact: The BOPP Film complies with all national and international standards and requirements for food contact.

Technical Details & Test Data

Packaging & Availability

Packing: Core Diameter Outer Diameter (*) Notes

Vertical
152 mm (6')
max. 550 mm

max. 700 mm – two or more rows
min. 700 mm – one row

76 m (3')

Horizontal
152 mm (6')
max. 770 mm

76 m (3')

(*) In case of no other requirements.
Tolerances: Weight Tolerance, depending on the order volume Width Tolerance Length Tolerance

max. 800 - 1200 ±2 mm ±5 %

900 - 11000

min. 9500 - 10500

Storage & Handling

Storage and Transportation Terms & Conditions: Palletizing of goods is done according to customer’s requirements

The storage of all goods is in dry, covered and clean warehouses

The transportation of the goods is carried out in dry, covered and clean means of transport

The recommended temperature of storage/transportation is 10-30°C. If the temperature is not within the recommended limits, the following issues may occur:

Decrease of dyne level

Higher haze of the film

Poor adhesion of the film surface that on a later stage could be an issue for laminating and printing

Extremely low COF that can trouble further processing

Excessive humidity can be a reason for film blocking

Adherence to the above mentioned storage conditions ensures that the film is suitable to be used up to 6 months after production

	Core Diameter	Outer Diameter (*)	Notes
Vertical	152 mm (6')	max. 550 mm	max. 700 mm – two or more rows min. 700 mm – one row
	76 m (3')
Horizontal	152 mm (6')	max. 770 mm
	76 m (3')

Weight Tolerance, depending on the order volume	Width Tolerance	Length Tolerance
max. 800 - 1200	±2 mm	±5 %
900 - 11000
min. 9500 - 10500

Knowde Enhanced TDS