Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
Applications & Uses
- Markets
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Electrical Properties
- Flammability
- Processing Parameters
| Value | Units | Test Method / Conditions | |
| Tensile Strength | 175 | MPa | ISO 527 |
| Tensile Modulus | 9800 | MPa | ISO 527 |
| Flexural Strength | 240 | MPa | ASTM D 790 |
| Flexural Modulus | 8700 | MPa | ASTM D 790 |
| Charpy Notched Impact Strength (23°C) | 14 | kJ/m2 | ISO 179/1eA |
| Charpy Notched Impact Strength (-20°C) | 11 | kJ/m2 | ISO 179 |
| Charpy Impact Strength (-20°C) | 70 | kJ/m2 | ISO 179/1eU |
| Charpy Impact Strength (23°C) | 75 | kJ/m2 | STN EN ISO 179 |
| Elongation | 2 | % | STN EN ISO 527-2 |
| Value | Units | Test Method / Conditions | |
| Melt Mass Flow Rate - MFR (275°C/0.325 kg) | 3 | g/10 min | STN EN ISO 1133 |
| Density | 1.36 | g/cm3 | ISO 1183/A |
| Water Content | 0.15 | % | STN EN ISO 3344 |
| Value | Units | Test Method / Conditions | |
| Heat Deflection Temperature - HDT | 250 | °C | STN EN ISO 75-2 (A) |
| Melting Temperature (DSC) | 260 | °C | STN EN ISO 11357-1 |
| Vicat Softening Temperature (B) | 250 | °C | STN EN ISO 306 |
| Value | Units | Test Method / Conditions | |
| Surface Resistivity | 1.00E+14 | ohm | IEC 60093 |
| Electric Strength | 40 | kV/mm | STN EN 60243-2 |
| Comparative Tracking Index - CTI (A) | 400 | V | STN EN 60112 |
| Volume Resistivity | 1.0e+15 | ohm.m | ASTM D 257 |
| Value | Units | Test Method / Conditions | |
| Glow Wire Test (3 mm) | 650 | °C | STN EN 60695-2-12 |
| Flammability | HB | - | UL 94 |
| Value | Units | Test Method / Conditions | |
| Mold Temperature Range | 60 - 90 | °C | -- |
| Drying: Temperature/Time | 80/4 | °C/h | -- |
| Manufacturing Shrinkage - length/width | 0.47/0.66 | % | STN EN ISO 294-4 |
| Injection Pressure | 70 - 120 | MPa | -- |
| Melt Temperature Range | 280 - 300 | °C | -- |