SLOVAMID 66 GF 30 TS

Identification & Functionality

Additives Included

Heat Stabilizer

Chemical Family

Polyamides

Fillers Included

Glass Fiber

Polymer Name

Polyamide 66 (PA 66)

Plastics & Elastomers Functions

Resin

Technologies

Plastics

Product Families

Plastics — Engineering & Specialty Polymers

Polyamides

Features & Benefits

Materials Features

Heat Stabilized

Applications & Uses

Markets

Automotive & Transportation,

Consumer Goods,

Electrical & Electronics,

Industrial

Applications

Automotive & Transportation — Automotive

Interior,

Other Automotive Applications,

Powertrain & UTH

Industrial — Chemical & Industrial Manufacturing

Equipment & Parts,

Tooling & Moldmaking

Electrical & Electronics — Devices & Assemblies

Automotive Electronics,

Other Devices & Assemblies

Consumer Goods — Sports & Recreation

Plastics & Elastomers End Uses

Automotive Applications,

Automotive Interior Parts,

Gears,

Molds/Dies/Tools,

Power/Other Tools,

Sporting Goods

Plastics & Elastomers Processing Methods

Injection Molding

Properties

Mechanical Properties

	Value	Units	Test Method / Conditions
Tensile Strength	165	MPa	ASTM D 638
Tensile Modulus	9500	MPa	ISO 527-2/1A/1
Flexural Strength	225	MPa	ASTM D 790
Flexural Modulus	7400	MPa	ASTM D 790
Charpy Impact Strength (23°C)	60	kJ/m2	ISO 179/1eU
Charpy Notched Impact Strength (23°C)	10	kJ/m2	ISO 179/1eA
Charpy Notched Impact Strength (-20°C)	10	kJ/m2	ISO 179
Charpy Impact Strength (-20°C)	50	kJ/m2	ISO 179/1eU
Elongation	3	%	ASTM D638

Physical Properties

	Value	Units	Test Method / Conditions
Melt Mass Flow Rate - MFR (275°C/0.325 kg)	3	g/10 min	STN EN ISO 1133
Density	1.36	g/cm3	ISO 1183/A
Water Content	0.15	%	STN EN ISO 3344

Thermal Properties

	Value	Units	Test Method / Conditions
Heat Deflection Temperature - HDT	250	°C	STN EN ISO 75-2 (A)
Melting Temperature (DSC)	260	°C	STN EN ISO 11357-1
Vicat Softening Temperature (B)	250	°C	STN EN ISO 306

Electrical Properties

	Value	Units	Test Method / Conditions
Surface Resistivity	1.00E+14	ohm	IEC 60093
Electric Strength	40	kV/mm	STN EN 60243-2
Comparative Tracking Index - CTI (A)	400	V	STN EN 60112
Volume Resistivity	1.0e+15	ohm.m	ASTM D 257

Flammability

	Value	Units	Test Method / Conditions
Glow Wire Test (3 mm)	650	°C	STN EN 60695-2-12
Flammability	HB	-	UL 94

Processing Parameters

	Value	Units	Test Method / Conditions
Mold Temperature Range	60 - 90	°C	--
Drying: Temperature/Time	80/4	°C/h	--
Manufacturing Shrinkage - length/width	0.74/1.15	%	STN EN ISO 294-4
Injection Pressure	70 - 120	MPa	--
Melt Temperature Range	280 - 300	°C	--