Knowde Enhanced TDS
Identification & Functionality
- Fillers Included
- Polymer Name
- Technologies
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Recommended Applications
- Meter Housings
- Appliance Housings
- Underwater Applications such as Pump Parts
- Recommended Applications
- Electrical Insulation
- MCB / ELCH Components
- Coil Formers
- Bobbins
- Housings For Lighting & Appliances
- Pump Housings
- Textile Components
- Recommended Applications
- Automobile Components
- Furniture
- Pump Housings
- Washing Machine Components
- Defense Applications
Properties
- Color
- Filler Content
- 30
- Typical Properties
- Processing Parameters
Value | Units | Test Method / Conditions | |
Specific Gravity | 1.3 | — | ASTM D 792 |
Heat Deflection Temp (at 18.5 Kg/cm²) | 140°C | °C | ASTM D 648 |
Tensile Strength at yield | 100 | MPa | ASTM D 638 |
Elongation at break | 1.5 | % | ASTM D 638 |
Flexural Strength | 125 | MPa | ASTM D 790 |
Modulus of Elasticity (Flexural) | 6000 | MPa | ASTM D 790 |
Un-notched IZOD Impact Strength | 25 | kg cm/cm of Notch | ASTM D 256 |
Value | Units | Test Method / Conditions | |
Pre-Drying Temperature(Time) | 100-120 (2 - 4) | °C (hr) | — |
Recommended Nozzle Melt Temperature | 280-300 | °C | — |
Recommended Mold Temperature | 80-120 | °C | — |
Injection Pressure | Medium: Low Back pressure | — | — |
Injection Speed | Medium | — | — |