Plastics Engineering Company 02000 Two-Stage Phenolic

Identification & Functionality

Chemical Family: Phenol Formaldehyde (PF),
Phenols & Phenolics
Polymer Name: Phenol Formaldehyde (PF)
Composite Materials Functions: Molding Compound
Technologies: Composite Materials
Product Families: Composite Materials — Prepregs & Molding Compounds
Other Prepregs & Molding Compounds

Features & Benefits

Materials Features: Chemical Resistant,
Cost Effective,
Electrically Insulating,
Excellent Mechanical Strength,
General Purpose,
Glossy Surface Aspects,
Good Balance of Properties,
Good Scratch Resistance,
Two-Stage

Applications & Uses

Markets: Automotive & Transportation,
Electrical & Electronics
Applications: Automotive & Transportation — Automotive
Automotive Lighting,
Chassis & Brake,
Fuel Systems,
Interior,
Powertrain & UTH
Electrical & Electronics — Parts & Components
Circuit Breakers,
Connectors,
Housings & Enclosures,
Terminal Blocks, Plugs & Sockets
Composites End Use: Automotive Interior Trim,
Brake Pads,
Cases,
Housings
Composites Processing Methods: Compression Molding,
Injection Molding
Plastics & Elastomers Processing Methods: Transfer Molding

Properties

	Value	Units	Test Method / Conditions
Apparent Density	0.59	g/cm³	ASTM D1895
Arc Resistance	133	sec	ASTM D495
Coefficient of Thermal Expansion	5.5e-05	per °C	ASTM E831
Comparative Tracking Index	158	V	ASTM D3638
Compressive Strength	198	MPa	ASTM D695
Deflection Temperature (at 1.82MPa)	155	°C	ASTM D648
Dielectric Strength (Short Time)	8.3	kV/mm	ASTM D149
Dissipation Factor (at 1MHz)	0.06	—	ASTM D150
Flexural Modulus	6862	MPa	ASTM D790
Flexural Strength	81.3	MPa	ASTM D790
Heat Resistance	198	°C	ASTM D794
Impact Strength (Drop Ball)	94	J/m	Plenco
Impact Strength (Notched, Izod)	15.6	J/m	ASTM D256
Impact Strength (Notched, Charpy)	17.9	J/m	ASTM D256
Mold Shrinkage *	0.01	m/m	ASTM D6289
Oxygen Index	28.4	%	ASTM D2863
Permittivity (at 1MHz)	5.4	—	ASTM D150
Post Shrinkage (at 120°C, 72hr)	0.39	%	ASTM D6289
Rockwell Hardness	86	E-Scale	ASTM D785
Specific Gravity	1.4	—	ASTM D792
Tensile Elongation	0.8	%	ASTM D638
Tensile Modulus	7590	MPa	ASTM D638
Tensile Strength	57	MPa	ASTM D638
Thermal Conductivity (at 100°C)	0.39	W/m/°C	ASTM E1461
UL Flammability (at 1.5mm)	V-1	—	UL 94
Volume Resistivity	230000000000	ohm·cm	ASTM D257
Water Absorption	0.33	%	ASTM D570

	Value	Units	Test Method / Conditions
Apparent Density	0.63	g/cm³	ASTM D1895
Arc Resistance	132	sec	ASTM D495
Coefficient of Thermal Expansion	5.5e-05	per °C	ASTM E831
Comparative Tracking Index	167	V	ASTM D3638
Compressive Strength	212	MPa	ASTM D695
Deflection Temperature (at 1.82MPa)	176	°C	ASTM D648
Dielectric Strength (Short Time)	12.2	kV/mm	ASTM D149
Dissipation Factor (at 1MHz)	0.052	—	ASTM D150
Flexural Modulus	8119	MPa	ASTM D790
Flexural Strength	92.3	MPa	ASTM D790
Heat Resistance	207	°C	ASTM D794
Impact Strength (Drop Ball)	109	J/m	Plenco
Impact Strength (Notched, Izod)	17.4	J/m	ASTM D256
Impact Strength (Notched, Charpy)	18.7	J/m	ASTM D256
Mold Shrinkage *	0.0044	m/m	ASTM D6289
Oxygen Index	28.4	%	ASTM D2863
Permittivity (at 1MHz)	5.2	—	ASTM D150
Post Shrinkage (at 120°C, 72hr)	0.2	%	ASTM D6289
Rockwell Hardness	90	E-Scale	ASTM D785
Specific Gravity	1.39	—	ASTM D792
Tensile Elongation	0.6	%	ASTM D638
Tensile Modulus	8595	MPa	ASTM D638
Tensile Strength	51	MPa	ASTM D638
Thermal Conductivity (at 100°C)	0.39	W/m/°C	ASTM E1461
UL Flammability (at 1.5mm)	V-1	—	UL 94
Volume Resistivity	320000000000	ohm·cm	ASTM D257
Water Absorption	0.4	%	ASTM D570

	Value	Units	Test Method / Conditions
Apparent Density	0.6	g/cm³	ASTM D1895
Arc Resistance	117	sec	ASTM D495
Coefficient of Thermal Expansion	5.5e-05	per °C	ASTM E831
Comparative Tracking Index	152	V	ASTM D3638
Compressive Strength	214	MPa	ASTM D695
Deflection Temperature (at 1.82MPa)	177	°C	ASTM D648
Dielectric Strength (Short Time)	8.6	kV/mm	ASTM D149
Dissipation Factor (at 1MHz)	0.065	—	ASTM D150
Flexural Modulus	7101	MPa	ASTM D790
Flexural Strength	80.8	MPa	ASTM D790
Heat Resistance	197	°C	ASTM D794
Impact Strength (Drop Ball)	98	J/m	Plenco
Impact Strength (Notched, Izod)	18.1	J/m	ASTM D256
Impact Strength (Notched, Charpy)	19.5	J/m	ASTM D256
Mold Shrinkage *	0.0065	m/m	ASTM D6289
Oxygen Index	28.4	%	ASTM D2863
Permittivity (at 1MHz)	6.1	—	ASTM D150
Post Shrinkage (at 120°C, 72hr)	0.21	%	ASTM D6289
Rockwell Hardness	91	E-Scale	ASTM D785
Specific Gravity	1.39	—	ASTM D792
Tensile Elongation	0.7	%	ASTM D638
Tensile Modulus	7830	MPa	ASTM D638
Tensile Strength	54	MPa	ASTM D638
Thermal Conductivity (at 100°C)	0.39	W/m/°C	ASTM E1461
UL Flammability (at 1.5mm)	V-1	—	UL 94
Volume Resistivity	270000000000	ohm·cm	ASTM D257
Water Absorption	0.32	%	ASTM D570

Regulatory & Compliance

Knowde Enhanced TDS