Plastics Engineering Company 02300 Two-Stage Phenolic

Identification & Functionality

Chemical Family: Phenol Formaldehyde (PF),
Phenols & Phenolics
Polymer Name: Phenol Formaldehyde (PF)
Composite Materials Functions: Molding Compound
Technologies: Composite Materials
Product Families: Composite Materials — Prepregs & Molding Compounds
Other Prepregs & Molding Compounds

Features & Benefits

Materials Features: Chemical Resistant,
Cost Effective,
Electrically Insulating,
Excellent Mechanical Strength,
General Purpose,
Glossy Surface Aspects,
Good Processability,
Good Scratch Resistance,
Two-Stage,
UL Listed

Applications & Uses

Markets: Automotive & Transportation,
Electrical & Electronics
Applications: Automotive & Transportation — Automotive
Automotive Lighting,
Chassis & Brake,
Fuel Systems,
Interior,
Powertrain & UTH
Electrical & Electronics — Parts & Components
Circuit Breakers,
Connectors,
Housings & Enclosures,
Terminal Blocks, Plugs & Sockets
Composites End Use: Automotive Interior Trim,
Brake Pads,
Cases,
Housings
Composites Processing Methods: Compression Molding
Plastics & Elastomers Processing Methods: Transfer Molding

Properties

	Value	Units	Test Method / Conditions
Apparent Density	0.6	g/cm³	ASTM D1895
Arc Resistance	95	sec	ASTM D495
Coefficient of Thermal Expansion	6.6e-05	per °C	ASTM E831
Comparative Tracking Index	165	V	ASTM D3638
Compressive Strength	228	MPa	ASTM D695
Deflection Temperature (at 1.82MPa)	171	°C	ASTM D648
Dielectric Strength (Short Time)	15.4	kV/mm	ASTM D149
Dissipation Factor (at 1MHz)	0.04	—	ASTM D150
Flexural Modulus	8698	MPa	ASTM D790
Flexural Strength	102.7	MPa	ASTM D790
Heat Resistance	201	°C	ASTM D794
Impact Strength (Drop Ball)	116	J/m	Plenco
Impact Strength (Notched, Izod)	18.6	J/m	ASTM D256
Impact Strength (Notched, Charpy)	19.1	J/m	ASTM D256
Mold Shrinkage *	0.0043	m/m	ASTM D6289
Oxygen Index	25.8	%	ASTM D2863
Permittivity (at 1MHz)	4.8	—	ASTM D150
Post Shrinkage (at 120°C, 72hr)	0.19	%	ASTM D6289
Rockwell Hardness	94	E-Scale	ASTM D785
Specific Gravity	1.39	—	ASTM D792
Tensile Elongation	0.8	%	ASTM D638
Tensile Modulus	9236	MPa	ASTM D638
Tensile Strength	64	MPa	ASTM D638
Thermal Conductivity (at 100°C)	0.35	W/m/°C	ASTM E1461
UL Flammability (at 1.5mm)	HB	—	UL 94
Volume Resistivity	1800000000000	ohm·cm	ASTM D257
Water Absorption	0.37	%	ASTM D570

	Value	Units	Test Method / Conditions
Apparent Density	0.59	g/cm³	ASTM D1895
Arc Resistance	126	sec	ASTM D495
Coefficient of Thermal Expansion	6.6e-05	per °C	ASTM E831
Comparative Tracking Index	158	V	ASTM D3638
Compressive Strength	212	MPa	ASTM D695
Deflection Temperature (at 1.82MPa)	162	°C	ASTM D648
Dielectric Strength (Short Time)	11.7	kV/mm	ASTM D149
Dissipation Factor (at 1MHz)	0.059	—	ASTM D150
Flexural Modulus	7597	MPa	ASTM D790
Flexural Strength	86.9	MPa	ASTM D790
Heat Resistance	198	°C	ASTM D794
Impact Strength (Drop Ball)	109	J/m	Plenco
Impact Strength (Notched, Izod)	17.9	J/m	ASTM D256
Impact Strength (Notched, Charpy)	19	J/m	ASTM D256
Mold Shrinkage *	0.0072	m/m	ASTM D6289
Oxygen Index	25.8	%	ASTM D2863
Permittivity (at 1MHz)	5	—	ASTM D150
Post Shrinkage (at 120°C, 72hr)	0.26	%	ASTM D6289
Rockwell Hardness	88	E-Scale	ASTM D785
Specific Gravity	1.37	—	ASTM D792
Tensile Elongation	0.8	%	ASTM D638
Tensile Modulus	7905	MPa	ASTM D638
Tensile Strength	53	MPa	ASTM D638
Thermal Conductivity (at 100°C)	0.35	W/m/°C	ASTM E1461
UL Flammability (at 1.5mm)	HB	—	UL 94
Volume Resistivity	570000000000	ohm·cm	ASTM D257
Water Absorption	0.34	%	ASTM D570

Regulatory & Compliance

Knowde Enhanced TDS