Plastics Engineering Company 02308 Two-Stage Phenolic

Identification & Functionality

Chemical Family: Phenol Formaldehyde (PF),
Phenols & Phenolics
Polymer Name: Phenol Formaldehyde (PF)
Composite Materials Functions: Molding Compound
Technologies: Composite Materials
Product Families: Composite Materials — Prepregs & Molding Compounds
Other Prepregs & Molding Compounds

Features & Benefits

Materials Features: Chemical Resistant,
Cost Effective,
Electrically Insulating,
Excellent Mechanical Strength,
General Purpose,
Glossy Surface Aspects,
Good Scratch Resistance,
Heat Resistance,
Two-Stage,
UL Listed

Applications & Uses

Markets: Automotive & Transportation,
Electrical & Electronics
Applications: Automotive & Transportation — Automotive
Automotive Lighting,
Chassis & Brake,
Fuel Systems,
Interior,
Powertrain & UTH
Electrical & Electronics — Parts & Components
Circuit Breakers,
Connectors,
Housings & Enclosures,
Terminal Blocks, Plugs & Sockets
Composites End Use: Automotive Interior Trim,
Brake Pads,
Cases,
Housings
Composites Processing Methods: Compression Molding,
Injection Molding
Plastics & Elastomers Processing Methods: Transfer Molding

Properties

	Value	Units	Test Method / Conditions
Apparent Density	0.62	g/cm³	ASTM D1895
Arc Resistance	141	sec	ASTM D495
Coefficient of Thermal Expansion	6.5e-05	per °C	ASTM E831
Comparative Tracking Index	175	V	ASTM D3638
Compressive Strength	189	MPa	ASTM D695
Deflection Temperature (at 1.82MPa)	141	°C	ASTM D648
Dielectric Strength (Short Time)	11.3	kV/mm	ASTM D149
Dissipation Factor (at 1MHz)	0.053	—	ASTM D150
Flexural Modulus	7507	MPa	ASTM D790
Flexural Strength	87.4	MPa	ASTM D790
Heat Resistance	199	°C	ASTM D794
Impact Strength (Drop Ball)	89	J/m	Plenco
Impact Strength (Notched, Izod)	15.8	J/m	ASTM D256
Impact Strength (Notched, Charpy)	18.1	J/m	ASTM D256
Mold Shrinkage *	0.0109	m/m	ASTM D6289
Oxygen Index	25.7	%	ASTM D2863
Permittivity (at 1MHz)	4.9	—	ASTM D150
Post Shrinkage (at 120°C, 72hr)	0.33	%	ASTM D6289
Rockwell Hardness	82	E-Scale	ASTM D785
Specific Gravity	1.41	—	ASTM D792
Tensile Elongation	0.7	%	ASTM D638
Tensile Modulus	8457	MPa	ASTM D638
Tensile Strength	57	MPa	ASTM D638
Thermal Conductivity (at 100°C)	0.41	W/m/°C	ASTM E1461
UL Flammability (at 1.5mm)	HB	—	UL 94
Volume Resistivity	440000000000	ohm·cm	ASTM D257
Water Absorption	0.32	%	ASTM D570

	Value	Units	Test Method / Conditions
Apparent Density	0.61	g/cm³	ASTM D1895
Arc Resistance	124	sec	ASTM D495
Coefficient of Thermal Expansion	6.5e-05	per °C	ASTM E831
Comparative Tracking Index	175	V	ASTM D3638
Compressive Strength	214	MPa	ASTM D695
Deflection Temperature (at 1.82MPa)	176	°C	ASTM D648
Dielectric Strength (Short Time)	14.4	kV/mm	ASTM D149
Dissipation Factor (at 1MHz)	0.042	—	ASTM D150
Flexural Modulus	8301	MPa	ASTM D790
Flexural Strength	91.7	MPa	ASTM D790
Heat Resistance	202	°C	ASTM D794
Impact Strength (Drop Ball)	115	J/m	Plenco
Impact Strength (Notched, Izod)	19.2	J/m	ASTM D256
Impact Strength (Notched, Charpy)	19.3	J/m	ASTM D256
Mold Shrinkage *	0.0046	m/m	ASTM D6289
Oxygen Index	25.7	%	ASTM D2863
Permittivity (at 1MHz)	4.9	—	ASTM D150
Post Shrinkage (at 120°C, 72hr)	0.23	%	ASTM D6289
Rockwell Hardness	89	E-Scale	ASTM D785
Specific Gravity	1.42	—	ASTM D792
Tensile Elongation	0.7	%	ASTM D638
Tensile Modulus	8796	MPa	ASTM D638
Tensile Strength	55	MPa	ASTM D638
Thermal Conductivity (at 100°C)	0.41	W/m/°C	ASTM E1461
UL Flammability (at 1.5mm)	HB	—	UL 94
Volume Resistivity	870000000000	ohm·cm	ASTM D257
Water Absorption	0.37	%	ASTM D570

	Value	Units	Test Method / Conditions
Apparent Density	0.63	g/cm³	ASTM D1895
Arc Resistance	141	sec	ASTM D495
Coefficient of Thermal Expansion	6.5e-05	per °C	ASTM E831
Comparative Tracking Index	175	V	ASTM D3638
Compressive Strength	208	MPa	ASTM D695
Deflection Temperature (at 1.82MPa)	172	°C	ASTM D648
Dielectric Strength (Short Time)	11.7	kV/mm	ASTM D149
Dissipation Factor (at 1MHz)	0.054	—	ASTM D150
Flexural Modulus	8165	MPa	ASTM D790
Flexural Strength	87.5	MPa	ASTM D790
Heat Resistance	204	°C	ASTM D794
Impact Strength (Drop Ball)	98	J/m	Plenco
Impact Strength (Notched, Charpy)	18.1	J/m	ASTM D256
Impact Strength (Notched, Charpy)	19.8	J/m	ASTM D256
Mold Shrinkage *	0.0063	m/m	ASTM D6289
Oxygen Index	25.7	%	ASTM D2863
Permittivity (at 1MHz)	5.4	—	ASTM D150
Post Shrinkage (at 120°C, 72hr)	0.29	%	ASTM D6289
Rockwell Hardness	86	E-Scale	ASTM D785
Specific Gravity	1.43	—	ASTM D792
Tensile Elongation	0.7	%	ASTM D638
Tensile Modulus	8072	MPa	ASTM D638
Tensile Strength	53	MPa	ASTM D638
Thermal Conductivity (at 100°C)	0.41	W/m/°C	ASTM E1461
UL Flammability (at 1.5mm)	HB	—	UL 94
Volume Resistivity	390000000000	ohm·cm	ASTM D257
Water Absorption	0.31	%	ASTM D570

Regulatory & Compliance

Knowde Enhanced TDS