Plastics Engineering Company 02535 Two-Stage Phenolic

Identification & Functionality

Chemical Family: Phenol Formaldehyde (PF),
Phenols & Phenolics
Polymer Name: Phenol Formaldehyde (PF)
Composite Materials Functions: Molding Compound
Technologies: Composite Materials
Product Families: Composite Materials — Prepregs & Molding Compounds
Other Prepregs & Molding Compounds

Features & Benefits

Materials Features: Chemical Resistant,
Cost Effective,
Electrically Insulating,
Excellent Mechanical Strength,
General Purpose,
Glossy Surface Aspects,
Good Electrical Properties,
Good Scratch Resistance,
Two-Stage,
UL Listed

Applications & Uses

Markets: Automotive & Transportation,
Electrical & Electronics
Applications: Automotive & Transportation — Automotive
Automotive Lighting,
Chassis & Brake,
Fuel Systems,
Interior,
Powertrain & UTH
Electrical & Electronics — Parts & Components
Circuit Breakers,
Connectors,
Housings & Enclosures,
Terminal Blocks, Plugs & Sockets
Composites End Use: Automotive Interior Trim,
Brake Pads,
Cases,
Housings
Composites Processing Methods: Compression Molding,
Injection Molding

Properties

	Value	Units	Test Method / Conditions
Apparent Density	0.62	g/cm³	ASTM D1895
Arc Resistance	126	sec	ASTM D495
Coefficient of Thermal Expansion	6.0e-05	per °C	ASTM E831
Comparative Tracking Index	159	V	ASTM D3638
Compressive Strength	201	MPa	ASTM D695
Deflection Temperature (at 1.82MPa)	159	°C	ASTM D648
Dielectric Strength (Short Time)	9.9	kV/mm	ASTM D149
Dissipation Factor (at 1MHz)	0.056	—	ASTM D150
Flexural Modulus	6945	MPa	ASTM D790
Flexural Strength	79.5	MPa	ASTM D790
Heat Resistance	195	°C	ASTM D794
Impact Strength (Drop Ball)	106	J/m	Plenco
Impact Strength (Notched, Izod)	18.2	J/m	ASTM D256
Impact Strength (Notched, Charpy)	18.5	J/m	ASTM D256
Mold Shrinkage *	0.0109	m/m	ASTM D6289
Oxygen Index	25.9	%	ASTM D2863
Permittivity (at 1MHz)	4.8	—	ASTM D150
Post Shrinkage (at 120°C, 72hr)	0.43	%	ASTM D6289
Rockwell Hardness	85	E-Scale	ASTM D785
Specific Gravity	1.38	—	ASTM D792
Tensile Elongation	0.9	%	ASTM D638
Tensile Modulus	7777	MPa	ASTM D638
Tensile Strength	56	MPa	ASTM D638
Thermal Conductivity (at 100°C)	0.37	W/m/°C	ASTM E1461
UL Flammability (at 1.5mm)	HB	—	UL 94
Volume Resistivity	290000000000	ohm·cm	ASTM D257
Water Absorption	0.41	%	ASTM D570

	Value	Units	Test Method / Conditions
Apparent Density	0.6	g/cm³	ASTM D1895
Arc Resistance	105	sec	ASTM D495
Coefficient of Thermal Expansion	6.0e-05	per °C	ASTM E831
Comparative Tracking Index	156	V	ASTM D3638
Compressive Strength	216	MPa	ASTM D695
Deflection Temperature (at 1.82MPa)	172	°C	ASTM D648
Dielectric Strength (Short Time)	14.5	kV/mm	ASTM D149
Dissipation Factor (at 1MHz)	0.038	—	ASTM D150
Flexural Modulus	8835	MPa	ASTM D790
Flexural Strength	97.2	MPa	ASTM D790
Heat Resistance	196	°C	ASTM D794
Impact Strength (Drop Ball)	128	J/m	Plenco
Impact Strength (Notched, Charpy)	19.2	J/m	ASTM D256
Impact Strength (Notched, Izod)	19.8	J/m	ASTM D256
Mold Shrinkage *	0.0036	m/m	ASTM D6289
Oxygen Index	25.9	%	ASTM D2863
Permittivity (at 1MHz)	4.6	—	ASTM D150
Post Shrinkage (at 120°C, 72hr)	0.2	%	ASTM D6289
Rockwell Hardness	91	E-Scale	ASTM D785
Specific Gravity	1.39	—	ASTM D792
Tensile Elongation	0.8	%	ASTM D638
Tensile Modulus	9053	MPa	ASTM D638
Tensile Strength	59	MPa	ASTM D638
Thermal Conductivity (at 100°C)	0.37	W/m/°C	ASTM E1461
UL Flammability (at 1.5mm)	HB	—	UL 94
Volume Resistivity	5700000000000	ohm·cm	ASTM D257
Water Absorption	0.44	%	ASTM D570

Regulatory & Compliance

Knowde Enhanced TDS