Plastics Engineering Company 02571 Two-Stage Phenolic

Identification & Functionality

Chemical Family: Phenol Formaldehyde (PF),
Phenols & Phenolics
Polymer Name: Phenol Formaldehyde (PF)
Composite Materials Functions: Molding Compound
Technologies: Composite Materials
Product Families: Composite Materials — Prepregs & Molding Compounds
Other Prepregs & Molding Compounds

Features & Benefits

Materials Features: Chemical Resistant,
Cost Effective,
Electrically Insulating,
Excellent Mechanical Strength,
General Purpose,
Glossy Surface Aspects,
Good Electrical Properties,
Good Scratch Resistance,
Two-Stage,
UL Listed

Applications & Uses

Markets: Automotive & Transportation,
Electrical & Electronics
Applications: Automotive & Transportation — Automotive
Automotive Lighting,
Chassis & Brake,
Fuel Systems,
Interior,
Powertrain & UTH
Electrical & Electronics — Parts & Components
Circuit Breakers,
Connectors,
Housings & Enclosures,
Terminal Blocks, Plugs & Sockets
Composites End Use: Automotive Interior Trim,
Brake Pads,
Cases,
Housings
Composites Processing Methods: Compression Molding,
Injection Molding
Plastics & Elastomers Processing Methods: Transfer Molding

Properties

	Value	Units	Test Method / Conditions
Apparent Density	0.64	g/cm³	ASTM D1895
Arc Resistance	132	sec	ASTM D495
Coefficient of Thermal Expansion	5.9e-05	per °C	ASTM E831
Comparative Tracking Index	180	V	ASTM D3638
Compressive Strength	193	MPa	ASTM D695
Deflection Temperature (at 1.82MPa)	161	°C	ASTM D648
Dielectric Strength (Short Time)	12.7	kV/mm	ASTM D149
Dissipation Factor (at 1MHz)	0.058	—	ASTM D150
Flexural Modulus	7762	MPa	ASTM D790
Flexural Strength	90.5	MPa	ASTM D790
Heat Resistance	200	°C	ASTM D794
Impact Strength (Drop Ball)	110	J/m	Plenco
Impact Strength (Notched, Charpy)	18.9	J/m	ASTM D256
Impact Strength (Notched, Izod)	19.3	J/m	ASTM D256
Mold Shrinkage *	0.009	m/m	ASTM D6289
Oxygen Index	27	%	ASTM D2863
Permittivity (at 1MHz)	4.6	—	ASTM D150
Post Shrinkage (at 120°C, 72hr)	0.29	%	ASTM D6289
Rockwell Hardness	86	E-Scale	ASTM D785
Specific Gravity	1.41	—	ASTM D792
Tensile Elongation	0.9	%	ASTM D638
Tensile Modulus	8869	MPa	ASTM D638
Tensile Strength	61	MPa	ASTM D638
Thermal Conductivity (at 100°C)	0.39	W/m/°C	ASTM E1461
UL Flammability (at 1.5mm)	HB	—	UL 94
Volume Resistivity	2500000000000	ohm·cm	ASTM D257
Water Absorption	0.3	%	ASTM D570

	Value	Units	Test Method / Conditions
Apparent Density	0.62	g/cm³	ASTM D1895
Arc Resistance	134	sec	ASTM D495
Coefficient of Thermal Expansion	5.9e-05	per °C	ASTM E831
Comparative Tracking Index	169	V	ASTM D3638
Compressive Strength	212	MPa	ASTM D695
Deflection Temperature (at 1.82MPa)	175	°C	ASTM D648
Dielectric Strength (Short Time)	14.3	kV/mm	ASTM D149
Dissipation Factor (at 1MHz)	0.047	—	ASTM D150
Flexural Modulus	8471	MPa	ASTM D790
Flexural Strength	90.4	MPa	ASTM D790
Heat Resistance	205	°C	ASTM D794
Impact Strength (Drop Ball)	109	J/m	Plenco
Impact Strength (Notched, Izod)	16.9	J/m	ASTM D256
Impact Strength (Notched, Charpy)	19.1	J/m	ASTM D256
Mold Shrinkage *	0.0048	m/m	ASTM D6289
Oxygen Index	27	%	ASTM D2863
Permittivity (at 1MHz)	5.2	—	ASTM D150
Post Shrinkage (at 120°C, 72hr)	0.17	%	ASTM D6289
Rockwell Hardness	87	E-Scale	ASTM D785
Specific Gravity	1.4	—	ASTM D792
Tensile Elongation	0.7	%	ASTM D638
Tensile Modulus	8285	MPa	ASTM D638
Tensile Strength	53	MPa	ASTM D638
Thermal Conductivity (at 100°C)	0.39	W/m/°C	ASTM E1461
UL Flammability (at 1.5mm)	HB	—	UL 94
Volume Resistivity	800000000000	ohm·cm	ASTM D257
Water Absorption	0.4	%	ASTM D570

	Value	Units	Test Method / Conditions
Apparent Density	0.6	g/cm³	ASTM D1895
Arc Resistance	135	sec	ASTM D495
Coefficient of Thermal Expansion	5.9e-05	per °C	ASTM E831
Comparative Tracking Index	154	V	ASTM D3638
Compressive Strength	208	MPa	ASTM D695
Deflection Temperature (at 1.82MPa)	174	°C	ASTM D648
Dielectric Strength (Short Time)	12.6	kV/mm	ASTM D149
Dissipation Factor (at 1MHz)	0.049	—	ASTM D150
Flexural Modulus	7499	MPa	ASTM D790
Flexural Strength	79.2	MPa	ASTM D790
Heat Resistance	197	°C	ASTM D794
Impact Strength (Drop Ball)	103	J/m	Plenco
Impact Strength (Notched, Izod)	17.1	J/m	ASTM D256
Impact Strength (Notched, Charpy)	19.5	J/m	ASTM D256
Mold Shrinkage *	0.0076	m/m	ASTM D6289
Oxygen Index	27	%	ASTM D2863
Permittivity (at 1MHz)	4.8	—	ASTM D150
Post Shrinkage (at 120°C, 72hr)	0.25	%	ASTM D6289
Rockwell Hardness	88	E-Scale	ASTM D785
Specific Gravity	1.41	—	ASTM D792
Tensile Elongation	0.7	%	ASTM D638
Tensile Modulus	8012	MPa	ASTM D638
Tensile Strength	52	MPa	ASTM D638
Thermal Conductivity (at 100°C)	0.39	W/m/°C	ASTM E1461
UL Flammability (at 1.5mm)	HB	—	UL 94
Volume Resistivity	690000000000	ohm·cm	ASTM D257
Water Absorption	0.32	%	ASTM D570

Regulatory & Compliance

Knowde Enhanced TDS