Plastics Engineering Company 07200 Two-Stage Phenolic

Identification & Functionality

Additives Included: Impact Modifier
Chemical Family: Phenol Formaldehyde (PF),
Phenols & Phenolics
Polymer Name: Phenol Formaldehyde (PF)
Reinforcement Material: Glass Fibers
Composite Materials Functions: Molding Compound
Technologies: Composite Materials
Product Families: Composite Materials — Prepregs & Molding Compounds
Other Prepregs & Molding Compounds

Features & Benefits

Materials Features: Dimensional Stability,
Excellent Mechanical Strength,
Excellent Surface Hardness,
Good Compressive Strength,
Good Impact Strength,
Good Surface Appearance,
Heat Resistance,
High Impact Resistance,
High Tensile Strength,
Impact Modified,
Impact Resistance,
Low Specific Gravity,
Shock Resistant,
Two-Stage,
UL Listed,
Vibration Damping

Applications & Uses

Markets: Automotive & Transportation,
Building & Construction,
Electrical & Electronics,
Industrial
Applications: Automotive & Transportation — Automotive
Fuel Systems,
Powertrain & UTH
Building & Construction — Building Materials
Pipes & Plumbing
Industrial — Chemical & Industrial Manufacturing
Equipment & Parts
Electrical & Electronics — Devices & Assemblies
Automotive Electronics
Electrical & Electronics — Parts & Components
Housings & Enclosures,
Switches & Relays,
Terminal Blocks, Plugs & Sockets
Electrical & Electronics — Wire & Cable
Power Transmission & Distribution
Composites End Use: Brake Pads,
Cases,
Housings,
Switch Board
Composites Processing Methods: Injection Molding
Plastics & Elastomers Processing Methods: Transfer Molding

Properties

	Value	Units	Test Method / Conditions
Apparent Density	0.55	g/cm³	ASTM D1895
Arc Resistance	120	sec	ASTM D495
Coefficient of Thermal Expansion	5.7e-05	per °C	ASTM E831
Comparative Tracking Index	151	V	ASTM D3638
Compressive Strength	187	MPa	ASTM D695
Deflection Temperature (at 1.82MPa)	148	°C	ASTM D648
Dielectric Strength (Short Time)	7.5	kV/mm	ASTM D149
Dissipation Factor (at 1MHz)	0.065	—	ASTM D150
Flexural Modulus	6389	MPa	ASTM D790
Flexural Strength	68.2	MPa	ASTM D790
Heat Resistance	187	°C	ASTM D794
Impact Strength (Drop Ball)	140	J/m	Plenco
Impact Strength (Notched, Charpy)	19.3	J/m	ASTM D256
Impact Strength (Notched, Izod)	20.8	J/m	ASTM D256
Mold Shrinkage *	0.0105	m/m	ASTM D6289
Oxygen Index	27.2	%	ASTM D2863
Permittivity (at 1MHz)	5.4	—	ASTM D150
Post Shrinkage (at 120°C, 72hr)	0.47	%	ASTM D6289
Rockwell Hardness	80	E-Scale	ASTM D785
Specific Gravity	1.37	—	ASTM D792
Tensile Elongation	0.7	%	ASTM D638
Tensile Modulus	8067	MPa	ASTM D638
Tensile Strength	49	MPa	ASTM D638
Thermal Conductivity (at 100°C)	0.35	W/m/°C	ASTM E1461
UL Flammability (at 6mm)	V-0	—	UL 94
Volume Resistivity	200000000000	ohm·cm	ASTM D257
Water Absorption	0.43	%	ASTM D570

	Value	Units	Test Method / Conditions
Apparent Density	0.53	g/cm³	ASTM D1895
Arc Resistance	93	sec	ASTM D495
Coefficient of Thermal Expansion	5.7e-05	per °C	ASTM E831
Comparative Tracking Index	160	V	ASTM D3638
Compressive Strength	197	MPa	ASTM D695
Deflection Temperature (at 1.82MPa)	166	°C	ASTM D648
Dielectric Strength (Short Time)	9.7	kV/mm	ASTM D149
Dissipation Factor (at 1MHz)	0.061	—	ASTM D150
Flexural Modulus	6853	MPa	ASTM D790
Flexural Strength	67.1	MPa	ASTM D790
Heat Resistance	192	°C	ASTM D794
Impact Strength (Drop Ball)	155	J/m	Plenco
Impact Strength (Notched, Charpy)	23.1	J/m	ASTM D256
Impact Strength (Notched, Izod)	23.2	J/m	ASTM D256
Mold Shrinkage *	0.0084	m/m	ASTM D6289
Oxygen Index	27.2	%	ASTM D2863
Permittivity (at 1MHz)	5.4	—	ASTM D150
Post Shrinkage (at 120°C, 72hr)	0.41	%	ASTM D6289
Rockwell Hardness	84	E-Scale	ASTM D785
Specific Gravity	1.37	—	ASTM D792
Tensile Elongation	0.6	%	ASTM D638
Tensile Modulus	7908	MPa	ASTM D638
Tensile Strength	43	MPa	ASTM D638
Thermal Conductivity (at 100°C)	0.35	W/m/°C	ASTM E1461
UL Flammability (at 6mm)	V-0	—	UL 94
Volume Resistivity	200000000000	ohm·cm	ASTM D257
Water Absorption	0.43	%	ASTM D570

Regulatory & Compliance

Knowde Enhanced TDS