Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
company tower banner
Plastics Engineering Company Company Logo

Plastics Engineering Company 07500 Two-Stage Phenolic

Plenco® 07500 is an organic reinforced phenolic molding compound, offering improved mechanical strength and excellent cosmetic characteristics. UL recognized under component file E40654. 07500 is available in black, brown, or red color. 07500 was qualified under military specification MIL-M-14 (superseded by ASTM D5948) TYPE CFG and batches can, if requested and paid for, be tested for certification to the standard.

Functions: Molding Compound

Polymer Name: Phenol Formaldehyde (PF)

Reinforcement Material: Glass Fibers

Processing Methods: Compression Molding, Injection Molding, Transfer Molding

End Uses: Brake Pads, Cases, Housings, Switch Board

Technical Data SheetSafety Data Sheet
  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

Additives Included

Impact Modifier

Chemical Family

Phenol Formaldehyde (PF),

Phenols & Phenolics

Polymer Name

Phenol Formaldehyde (PF)

Reinforcement Material

Glass Fibers

Composite Materials Functions

Molding Compound

Technologies

Composite Materials

Product Families

Composite Materials — Prepregs & Molding Compounds

Other Prepregs & Molding Compounds

Features & Benefits

Materials Features

Dimensional Stability,

Excellent Mechanical Strength,

Excellent Surface Hardness,

Good Compressive Strength,

Good Impact Strength,

Good Surface Appearance,

Heat Resistance,

High Impact Resistance,

High Tensile Strength,

Impact Modified,

Impact Resistance,

Low Specific Gravity,

Shock Resistant,

Two-Stage,

UL Listed,

Vibration Damping

Applications & Uses

Markets

Automotive & Transportation,

Building & Construction,

Electrical & Electronics,

Industrial

Applications

Automotive & Transportation — Automotive

Fuel Systems,

Powertrain & UTH

Building & Construction — Building Materials

Pipes & Plumbing

Industrial — Chemical & Industrial Manufacturing

Equipment & Parts

Electrical & Electronics — Devices & Assemblies

Automotive Electronics

Electrical & Electronics — Parts & Components

Housings & Enclosures,

Switches & Relays,

Terminal Blocks, Plugs & Sockets

Electrical & Electronics — Wire & Cable

Power Transmission & Distribution

Composites End Use

Brake Pads,

Cases,

Housings,

Switch Board

Composites Processing Methods

Compression Molding,

Injection Molding

Plastics & Elastomers Processing Methods

Transfer Molding

Properties

Color

Black,

Brown,

Red

Flame Rating

UL 94 HB

Physical Form

Granules,

Solid

Processing Information (Injection Molding)
ValueUnitsTest Method / Conditions
Apparent Density0.52g/cm³ASTM D1895
Arc Resistance120secASTM D495
Coefficient of Thermal Expansion5.8e-05per °CASTM E831
Comparative Tracking Index158VASTM D3638
Compressive Strength213MPaASTM D695
Deflection Temperature (at 1.82MPa)150°CASTM D648
Dielectric Strength (Short Time)10.8kV/mmASTM D149
Dissipation Factor (at 1MHz)0.047—ASTM D150
Flexural Modulus6980MPaASTM D790
Flexural Strength86MPaASTM D790
Heat Resistance196°CASTM D794
Impact Strength (Drop Ball)115J/mPlenco
Impact Strength (Notched, Charpy)18.3J/mASTM D256
Impact Strength (Notched, Izod)18.8J/mASTM D256
Mold Shrinkage *0.0111m/mASTM D6289
Oxygen Index24.9%ASTM D2863
Permittivity (at 1MHz)4.5—ASTM D150
Post Shrinkage (at 120°C, 72hr)0.36%ASTM D6289
Rockwell Hardness88E-ScaleASTM D785
Specific Gravity1.37—ASTM D792
Tensile Elongation0.9%ASTM D638
Tensile Modulus8148MPaASTM D638
Tensile Strength62MPaASTM D638
Thermal Conductivity (at 100°C)0.36W/m/°CASTM E1461
UL Flammability (at 1.5mm)HB—UL 94
Volume Resistivity81000000000000ohm·cmASTM D257
Water Absorption0.35%ASTM D570
Processing Information (Compression Molding)
ValueUnitsTest Method / Conditions
Apparent Density0.51g/cm³ASTM D1895
Arc Resistance120secASTM D495
Coefficient of Thermal Expansion5.8e-05per °CASTM E831
Comparative Tracking Index171VASTM D3638
Compressive Strength215MPaASTM D695
Deflection Temperature (at 1.82MPa)176°CASTM D648
Dielectric Strength (Short Time)15.6kV/mmASTM D149
Dissipation Factor (at 1MHz)0.04—ASTM D150
Flexural Modulus8806MPaASTM D790
Flexural Strength98.7MPaASTM D790
Heat Resistance194°CASTM D794
Impact Strength (Drop Ball)171J/mPlenco
Impact Strength (Notched, Izod)23.3J/mASTM D256
Impact Strength (Notched, Charpy)24.3J/mASTM D256
Mold Shrinkage *0.0038m/mASTM D6289
Oxygen Index24.9%ASTM D2863
Permittivity (at 1MHz)4.7—ASTM D150
Post Shrinkage (at 120°C, 72hr)0.16%ASTM D6289
Rockwell Hardness90E-ScaleASTM D785
Specific Gravity1.38—ASTM D792
Tensile Elongation0.7%ASTM D638
Tensile Modulus8877MPaASTM D638
Tensile Strength54MPaASTM D638
Thermal Conductivity (at 100°C)0.36W/m/°CASTM E1461
UL Flammability (at 1.5mm)HB—UL 94
Volume Resistivity2200000000000ohm·cmASTM D257
Water Absorption0.5%ASTM D570
Processing Information (Transfer Molding)
ValueUnitsTest Method / Conditions
Apparent Density0.52g/cm³ASTM D1895
Arc Resistance126secASTM D495
Coefficient of Thermal Expansion5.8e-05per °CASTM E831
Comparative Tracking Index157VASTM D3638
Compressive Strength221MPaASTM D695
Deflection Temperature (at 1.82MPa)166°CASTM D648
Dielectric Strength (Short Time)11.4kV/mmASTM D149
Dissipation Factor (at 1MHz)0.05—ASTM D150
Flexural Modulus7479MPaASTM D790
Flexural Strength81.8MPaASTM D790
Heat Resistance200°CASTM D794
Impact Strength (Drop Ball)120J/mPlenco
Impact Strength (Notched, Izod)20J/mASTM D256
Impact Strength (Notched, Charpy)20.3J/mASTM D256
Mold Shrinkage *0.007m/mASTM D6289
Oxygen Index24.9%ASTM D2863
Permittivity (at 1MHz)4.7—ASTM D150
Post Shrinkage (at 120°C, 72hr)0.25%ASTM D6289
Rockwell Hardness91E-ScaleASTM D785
Specific Gravity1.37—ASTM D792
Tensile Elongation0.8%ASTM D638
Tensile Modulus7763MPaASTM D638
Tensile Strength52MPaASTM D638
Thermal Conductivity (at 100°C)0.36W/m/°CASTM E1461
UL Flammability (at 1.5mm)HB—UL 94
Volume Resistivity560000000000ohm·cmASTM D257
Water Absorption0.3%ASTM D570

Regulatory & Compliance

Certifications & Compliance

UL 94