Products

Plastron Ant PO 10 B is a antiblocking master batch used as antiblocking agent for PO films which are less than 50 µm thickness.

Plastron PS Alsu 50 is used as PS foam.

Plastron NUC® NA 10 is used as nucleating agent for extrusion, injection molding and blow molding of polypropylene.

Plastron Foam C 4113 is used for nucleation for physical foamed PS sheets.

Plastron Ant PO 10 is a antiblocking master batch used as antiblocking agent for PO films which are less than 100 µm thickness.

Plastron NUC® C 4012 PS is used for nucleation of PS foam, with CO2 blown.

Plastron NUC® C 20 -N is nucleating agent for the cycle time reduction of thermoplastic resins. Applicable in injection and blow molding processes as well. Convenient for LDPE, HDPE, PP, PA ABS, PS EPDM ABS/PC blends.

Plaststatic 50 PE is Internal and external antistatic agent for polyolefin, it gives almost instantaneous antistatic performance. However in some cases the effect might be only temporarily.

Plastron NUC® T-50 is used as talc MB for the nucleation of PE foam in the direct gassing extrusion process.

Plaststatic 30 PS is a foam stabilizer for Polystyrene foam, improves the cell-structure and prevents the cell shrinkage after cooling of the foam and gives antistatic properties of the foam.

Plastron NUC® C 20 is Nucleating agent for the cycle time reduction of thermoplastic resins. Applicable in injection and blow molding processes as well. Convenient for LDPE, HDPE, PP, PA ABS, PS EPDM ABS/PC blend, especially for transparent polymers.

Plastron Foam Wet 35 used for reduction of the surface tension of open-cell.

Plastron NUC® C 4012 PO is used for nucleation of Polyolefin foam, with CO2 blown.

Plastron Ant 15 is used as combined Masterbatch as antiblocking agent and internal and external lubricant as well for high transparency PET film application

Plastron LT- PZ STAB is a stabilizer used for long time stabilization for PE films.

Plaststatic 25 PE is Internal antistatic for polyolefin, it gives almost instantaneous antistatic performance. However in a lot of cases the effect might be only temporarily and applicable for PE and PP.