Products

Plastron NUC® C 4012 PS is used for nucleation of PS foam, with CO2 blown.

Plastron NUC® C 20 -N is nucleating agent for the cycle time reduction of thermoplastic resins. Applicable in injection and blow molding processes as well. Convenient for LDPE, HDPE, PP, PA ABS, PS EPDM ABS/PC blends.

Plastron Ant PO 10 is a antiblocking master batch used as antiblocking agent for PO films which are less than 100 µm thickness.

Plastron Foam C 4113 is used for nucleation for physical foamed PS sheets.

Plastron NUC® T-50 is used as talc MB for the nucleation of PE foam in the direct gassing extrusion process.

Plaststatic 50 PE is Internal and external antistatic agent for polyolefin, it gives almost instantaneous antistatic performance. However in some cases the effect might be only temporarily.

Plaststatic 30 PS is a foam stabilizer for Polystyrene foam, improves the cell-structure and prevents the cell shrinkage after cooling of the foam and gives antistatic properties of the foam.

Plastron NUC® C 20 is Nucleating agent for the cycle time reduction of thermoplastic resins. Applicable in injection and blow molding processes as well. Convenient for LDPE, HDPE, PP, PA ABS, PS EPDM ABS/PC blend, especially for transparent polymers.

Plastron NUC® C 4012 PO is used for nucleation of Polyolefin foam, with CO2 blown.

Plastron Foam Wet 35 used for reduction of the surface tension of open-cell.

Plastron PS Alsu 50 is used as PS foam.

Plastron UV PP 45 is a UV stabilizer applicable in UV stabilization for PP (automotive applications)

Plastron Ant 15 is used as combined Masterbatch as antiblocking agent and internal and external lubricant as well for high transparency PET film application

Plastron foam is endothermic blowing agent applicable for full range for all applications.

Plastron Ant PO 10 B is a antiblocking master batch used as antiblocking agent for PO films which are less than 50 µm thickness.

Plastron LT- PZ STAB is a stabilizer used for long time stabilization for PE films.

Plaststatic 25 PE is Internal antistatic for polyolefin, it gives almost instantaneous antistatic performance. However in a lot of cases the effect might be only temporarily and applicable for PE and PP.

Plastron NUC® NA 10 is used as nucleating agent for extrusion, injection molding and blow molding of polypropylene.