company tower banner

Products

Plastron

10 Products found on Plastron in Performance Additives

PLASTRON NUC® C 4012 PS banner

PLASTRON NUC® C 4012 PS

Functions:Nucleating Agent
Processing Methods:Extrusion, Blown Film Extrusion, Film Extrusion
Carrier:Resin-based, Polystyrenes (PS)

Plastron NUC® C 4012 PS is used for nucleation of PS foam, with CO2 blown.

PLASTRON NUC® C 20 -N banner

PLASTRON NUC® C 20 -N

Functions:Nucleating Agent
Compatible Polymers & Resins:Ethylene Propylene Diene Monomer (EPDM), Polyamides, Polycarbonates (PC), Polypropylenes (PP), High-Density Polyethylene (HDPE), Polyolefins, Acrylonitrile Butadiene Styrene (ABS), Polyethylenes (PE)
Processing Methods:Injection Molding, Blow Molding
Chemical Family:Carboxylic Acids & Derivatives
Features:Shorter Cycle Time

Plastron NUC® C 20 -N is nucleating agent for the cycle time reduction of thermoplastic resins. Applicable in injection and blow molding processes as well. Convenient for LDPE, HDPE, PP, PA ABS, PS EPDM ABS/PC blends.

PLASTRON FOAM C 4113 banner

PLASTRON FOAM C 4113

Functions:Nucleating Agent
Processing Methods:Extrusion, Blown Film Extrusion, Film Extrusion
Carrier:Resin-based, Polystyrenes (PS)

Plastron Foam C 4113 is used for nucleation for physical foamed PS sheets.

PLASTRON NUC® T-50 banner

PLASTRON NUC® T-50

Functions:Nucleating Agent
Compatible Polymers & Resins:Polyethylenes (PE)
Carrier:Low-Density Polyethylene (LDPE), Resin-based

Plastron NUC® T-50 is used as talc MB for the nucleation of PE foam in the direct gassing extrusion process.

PLASTRON NUC® C 20 banner

PLASTRON NUC® C 20

Functions:Nucleating Agent
Compatible Polymers & Resins:Ethylene Propylene Diene Monomer (EPDM), Polyamides, Polycarbonates (PC), Polypropylenes (PP), High-Density Polyethylene (HDPE), Polyolefins, Acrylonitrile Butadiene Styrene (ABS), Polyethylenes (PE)
Processing Methods:Injection Molding, Blow Molding
Chemical Family:Carboxylic Acids & Derivatives
Features:Shorter Cycle Time

Plastron NUC® C 20 is Nucleating agent for the cycle time reduction of thermoplastic resins. Applicable in injection and blow molding processes as well. Convenient for LDPE, HDPE, PP, PA ABS, PS EPDM ABS/PC blend, especially for transparent polymers.

PLASTRON NUC® C 4012 PO banner

PLASTRON NUC® C 4012 PO

Functions:Nucleating Agent
Compatible Polymers & Resins:Polyolefins
Processing Methods:Film Extrusion, Extrusion, Blown Film Extrusion
Carrier:Polypropylenes (PP), Resin-based, Polyethylenes (PE)

Plastron NUC® C 4012 PO is used for nucleation of Polyolefin foam, with CO2 blown.

PLASTRON FOAM WET 35 banner

PLASTRON FOAM WET 35

Functions:Wetting Agent, Dispersant
Compatible Polymers & Resins:Polystyrenes (PS)
Carrier:Resin-based, Polystyrenes (PS)

Plastron Foam Wet 35 used for reduction of the surface tension of open-cell.

PLASTRON PS ALSU 50 banner

PLASTRON PS ALSU 50

Functions:Wetting Agent, Dispersant
Compatible Polymers & Resins:Polystyrenes (PS)
Carrier:Resin-based, Polystyrenes (PS)

Plastron PS Alsu 50 is used as PS foam.

Plastron FOAM banner

Functions:Foaming Agent
Compatible Polymers & Resins:Polyethylenes (PE), Ethylene Vinyl Alcohol (EVOH), Polyethylene Terephthalate (PET), Polystyrenes (PS), Polypropylenes (PP)
Processing Methods:Blow Molding, Foam Extrusion, Extrusion, Injection Molding, Foam Injection Molding
Carrier:Polypropylenes (PP), Resin-based, Polyethylenes (PE)

Plastron foam is endothermic blowing agent applicable for full range for all applications.

PLASTRON NUC® NA 10 banner

PLASTRON NUC® NA 10

Functions:Nucleating Agent
Compatible Polymers & Resins:Polypropylenes (PP)
Processing Methods:Blow Molding, Extrusion, Injection Molding
Carrier:Polypropylenes (PP), Resin-based
Features:Shorter Cycle Time

Plastron NUC® NA 10 is used as nucleating agent for extrusion, injection molding and blow molding of polypropylene.