Products

BindEX E-160 is a maleic anhydride modified linear low density polyethylene adhesive resin. It can be processed within different extrusion and co-extrusion technologies designed to process polyolefins. It is especially designed to combine aluminum sheets with polymer core in Aluminum composite panels, using extrusion coating process.

BindEX E-165 is a modified linear low density polyethylene adhesive resin designed for use in adhesive film for making Aluminum Composite Panels (ACP). The chemical modification provides excellent adhesion to both polyethylene and aluminum substrates. It is preferably used as outer layer in 3- layer coextruded blown film structure. It is this layer which faces aluminum sheet during lamination process. It can be processed on normal extruders used for processing of polyethylenes.

OPTIM® E-119 is a maleic anhydride modified linear low density polyethylene. It is used to improve adhesion of HFFR fillers such as Magnesium Hydroxide [Mg(OH)2] & Alumina Trihydrate (ATH) and the polymer matrix.

BindEX E-187 is a ready-to use tie resin to adhere barrier layer such as Nylon 6, Nylon 66 and EVOH with layers of PE or co-polymer of PP in a multilayer co-extruded structure made using blown film process. It is based on anhydride functionalized, Polyolefin. It is designed to be used as such, without dilution.

OPTIM® E-151 is a maleic anhydride modified polyethylene with additional ester groups. It is used as compatibilizer between polar and non-polar polymers. It also acts as coupling agent to improve adhesion of mineral fillers and polymer matrix.

OPTIPET™-213M is a chain extender that can react with the chains of recycled PET scrap and restore its original properties.

BindEX E-186 is a maleic anhydride modified metallocene based linear low density polyethylene. With advanced anhydride grafting technology, this grade creates superb adhesion to EVOH, PA and PE, while maintaining excellent process ability.

MB-80 is an adhesive resin based on modified polyethylene. It can be used to produce a three-layer low temperature adhesive film, for manufacture of Aluminum Composite Panels (ACP). The chemical modification provides excellent adhesion to both polyethylene and aluminum substrates. It is preferably used as outer layer in 3- layer coextruded blown film structure. It is this layer with MB-80, which faces aluminum sheet during ACP manufacturing process. It can be processed on normal extruders used for making 3-layer polyethylene films.

BindEX E-183 is a maleic anhydride modified metallocene based linear low density polyethylene (mLLDPE) adhesive resin. It can be processed within different extrusion and co-extrusion technologies designed to process polyolefins. It is blendable with PP random copolymer up to 30% proportion.

OPTIM® E-152 is a maleic anhydride modified polyethylene with additional ester groups. It is used as compatibilizer between polar and non-polar polymers. It also acts as coupling agent to improve adhesion of mineral fillers and polymer matrix.

OPTIM® E-118 is a maleic anhydride modified linear low-density polyethylene. It has been designed to promote adhesion between carrier polymer and high loading of mineral fillers in HFFR cable compounds. Without this coupling agent, it is not possible to achieve the required mechanical properties in the cable compound.

OPTIPET™ 214M is a chain extender master batch for polyamides. It reacts with recycled Nylon scrap and restores its original properties. OPTIPET™ 214M is used to give the combined effect of a reactive chain extender, as well as impact modifier for polyamide plastics. Multifunctional active material in the OPTIPET™ 214M master batch reacts with some of the polyamide endgroups of different chains. This crosslinks the smaller chains that had been formed due to degradation in the scrap during earlier use.

OPTIM® E-142 is a maleic anhydride modified linear low density polyethylene. It is used for toughening of Polyamides such as Nylon-6.