company tower banner

Products

Polikim

Matching Product Categories

Plastics

Composite Materials

Composite Materials

8 Products found on Polikim

TDSWith TDS

Efalon® Glass-filled C-15 banner

Efalon® Glass-filled C-15

Polymer Name:Polytetrafluoroethylene (PTFE)
Reinforcement Material:Glass Fibers
Physical Form:Tube, Rods, Sheets
Density:2150.0 - 2250.0 kg/m³
Features:Creep Resistant, Medium Hardness, Low Deformation Tendency, Good Compressive Strength, Wear Resistant, Low Thermal Expansion, High Coefficient of Friction

Efalon® Glass-filled C-15 is a PTFE glass filled is reinforced with glass fibers with the percentage 15% and 25% depending on the needs of the application.

Ulpolen® 1000 banner

Polymer Name:Ultra High Molecular Weight Polyethylene (UHMWPE)
Physical Form:Sheets
Features:Good Weather Stability, Good Machinability, Impact Resistance, Light Weight, Wear Resistant, Low Density, Electrically Insulating, Chemical Resistant
Density:940.0 - 940.0 kg/m³

Ulpolen® 1000 (PE1000) is a type of polyethylene with average molecular weight over 5 million. ULPOLEN1000®’s resistance to impact and wear is much higher than that of other plastics in a wide temperature interval.

Efalon® Virgin T-100 banner

Efalon® Virgin T-100

Polymer Name:Polytetrafluoroethylene (PTFE)
Physical Form:Sheets, Rods, Tube
Features:Non Stick, Electrically Insulating, Good Weather Stability, Chemical Resistant, Wide Temperature Operating Range
Density:2100.0 - 2200.0 kg/m³

Efalon® Virgin T-100 has molecular structure composed of carbon and fluor atoms, EFALON® (PTFE) has a long list of unique properties uncommon in other materials. Polikim can make the following changes in material properties to meet the application requirements:.

Ulpolen® 500 banner

Polymer Name:Ultra High Molecular Weight Polyethylene (UHMWPE)
Physical Form:Sheets
Features:Good Weather Stability, Good Machinability, Impact Resistance, Light Weight, Wear Resistant, Low Density, Electrically Insulating, Chemical Resistant
Density:940.0 - 940.0 kg/m³

Ulpolen® 500 offers increased wear resistance and impact strength compared to HDPE. It is extremely strong, has excellent resistance to chemicals and low temperatures and has very low moisture absorption. Ulpolen®PE300-HDPE (high-density polyethylene) offers excellent impact resistance, light weight, low moisture absorption, and high tensile strength. HDPE is also non-toxic and non-staining and meets FDA and USDA certification for food processing.

KESTAMID® banner

Polymer Name:Polyamide 6 (PA 6)
Physical Form:Rods, Sheets, Tube
Features:Good Abrasion Resistance, Impact Resistance, Wear Resistant
Density:1150.0 - 1150.0 kg/m³
Tensile Modulus:4000.0 - 4000.0 MPa
Color:Yellow

Polikim Kestamid®(PA6G-Cast Nylon) is one of the most commonly used engineering plastics.

Efalon® Glass-filled C-25 banner

Efalon® Glass-filled C-25

Polymer Name:Polytetrafluoroethylene (PTFE)
Reinforcement Material:Glass Fibers
Physical Form:Tube, Rods, Sheets
Density:2200.0 - 2300.0 kg/m³
Features:Creep Resistant, Medium Hardness, Low Deformation Tendency, Good Compressive Strength, Wear Resistant, Low Thermal Expansion, High Coefficient of Friction

Efalon® Glass-filled C-25 is a PTFE glass filled is reinforced with glass fibers with the percentage 15% and 25% depending on the needs of the application.

KESTAMID-HS® banner

Polymer Name:Polyamide 6 (PA 6)
Physical Form:Sheets, Rods, Tube
Features:Good Machinability, Very Good Heat Resistance, Chemical Resistant, Wear Resistant, Impact Resistance, Wide Temperature Operating Range
Density:1150.0 - 1150.0 kg/m³
Tensile Modulus:4000.0 - 4000.0 MPa
Color:Blue

Kestamid-HS® is Polikim’s cast polyamide with increased heat resistance.

Ulpolen® 300 banner

Polymer Name:Ultra High Molecular Weight Polyethylene (UHMWPE)
Physical Form:Sheets
Features:Good Weather Stability, Good Machinability, Impact Resistance, Light Weight, Wear Resistant, Low Density, Electrically Insulating, Chemical Resistant
Density:940.0 - 940.0 kg/m³

Ulpolen® 300 offers increased wear resistance and impact strength compared to HDPE. It is extremely strong, has excellent resistance to chemicals and low temperatures and has very low moisture absorption. Ulpolen®PE300-HDPE (high-density polyethylene) offers excellent impact resistance, light weight, low moisture absorption, and high tensile strength. HDPE is also non-toxic and non-staining and meets FDA and USDA certification for food processing.